Land Rover Trucks LR4 Tires

Land Rover Trucks LR4 uses two tire sizes across the 2010 to 2016 model range: 255/55R19 and 255/50R20. The 255/55R19 size appears from 2010 through 2016 and fits 19-inch wheels, while 255/50R20 appears from 2011 through 2016 and fits 20-inch wheels. Both are metric radial sizes, and they are tied directly to wheel diameter.

The practical takeaway is that year alone does not always identify the correct tire for Land Rover Trucks LR4. A 2011 through 2016 vehicle may have either size depending on its wheel package. Read the size on the sidewall already fitted, or measure and confirm whether the vehicle has 19-inch or 20-inch wheels before selecting replacement tires.

On Land Rover Trucks LR4, 255/55R19 is a metric radial tire size. The 255 refers to section width in millimeters, 55 is the aspect ratio, meaning the sidewall height is 55 percent of the section width, R indicates radial construction, and 19 is the wheel diameter in inches. That means this size is built specifically for a 19-inch rim.

Understanding the code helps prevent a common fitment mistake on Land Rover Trucks LR4, where two wheel diameters were used during the same general production period. Even though both available sizes share the same 255 millimeter width, the sidewall proportion and wheel diameter are different. Matching only the width is not enough; the full size code must match the wheel.

A 2013 Land Rover Trucks LR4 has two tire sizes listed because that model year was offered with two different wheel-diameter packages. The available sizes are 255/55R19 for 19-inch wheels and 255/50R20 for 20-inch wheels. This is a wheel-package split rather than a case where one tire size simply replaces the other.

That matters because the correct choice depends on the actual wheels fitted to your Land Rover Trucks LR4, not just the registration year. If the vehicle has changed hands, received aftermarket wheels, or had a wheel swap during its life, the present wheel diameter is the deciding factor. Verify the wheel first, then match the tire size that belongs to it.

Land Rover Trucks LR4 uses two rim diameters in the years covered here: 19 inches and 20 inches. The 255/55R19 size fits 19-inch wheels and appears from 2010 through 2016, while the 255/50R20 size fits 20-inch wheels and appears from 2011 through 2016. Both wheel diameters were in use during much of the production run.

Because both rim diameters overlap in the same years, wheel size should be checked before any other fitment detail. The easiest path is to read the size already molded into the sidewall or confirm the wheel marking directly. Once the wheel diameter is known, the tire choice for Land Rover Trucks LR4 becomes much more straightforward.

A 2015 Land Rover Trucks LR4 may use either 255/55R19 or 255/50R20, so the correct size is determined by the wheel package on the vehicle. The 19-inch wheel uses 255/55R19, while the 20-inch wheel uses 255/50R20. Both sizes were used in that model year, so the year by itself is not enough to identify the tire.

Start by checking the tire sidewall currently fitted and confirming that the wheel itself matches that diameter. If the vehicle has replacement wheels, compare what is on the truck with service records, factory labels, or marque-specific references. That extra step helps ensure the replacement tire matches the actual Land Rover Trucks LR4 configuration rather than an assumption tied only to the calendar year.

No product brand listings are present here for Land Rover Trucks LR4, so this page is primarily a size guide showing that the vehicle uses 255/55R19 and 255/50R20 depending on wheel diameter and year. The key fitment facts are the size itself and whether the vehicle carries 19-inch or 20-inch wheels. Those are the details that determine compatibility first.

Once the correct size is confirmed on the Land Rover Trucks LR4, brand selection becomes a separate decision guided by driving use, desired appearance, and ride preference. For an original-style presentation, many owners stay close to factory-equivalent dimensions and proportions. For a frequently driven truck, consistency in load rating, speed rating, and overall specification matters just as much as the brand name on the sidewall.

No sidewall-style variations are listed here for Land Rover Trucks LR4, so the most important selection step is still matching the tire size to the correct wheel diameter. The covered fitments are 255/55R19 and 255/50R20, both modern metric radial sizes used on 19-inch and 20-inch wheels respectively. Sidewall appearance comes after those fitment basics are settled.

For Land Rover Trucks LR4, sidewall style is usually a secondary choice compared with proper dimensions and intended use. Owners seeking a more original road-going appearance generally stay with a size and overall profile that preserves the truck’s stance, while regular drivers may focus more on tread and ride characteristics. Either way, the tire must first match the wheel diameter and full size code.

A Land Rover Trucks LR4 should be stored on a clean, dry surface away from direct sunlight, ozone sources, and large temperature swings. Tires age faster when exposed to electric motors, heaters, harsh chemicals, or prolonged UV light, even if tread wear is minimal. Keeping the tires properly inflated during storage also helps preserve sidewall shape and carcass stability.

If a Land Rover Trucks LR4 sits for long periods, move it occasionally or use appropriate supports to reduce flat-spotting. Long-term storage also benefits from washing road salt and grime off the tires before the vehicle is parked. When the truck returns to service, inspect each tire carefully for cracking, bulges, punctures, or any uneven wear that may have developed while it was idle.

Tires on a Land Rover Trucks LR4 should be inspected regularly, not only when they appear worn. A visual check before longer drives and a more thorough inspection at routine service intervals is a sensible standard for a vehicle of this type, especially one that may alternate between highway use and periods of storage. Inspect tread wear, sidewall condition, inflation pressure, and any signs of impact damage.

Regular inspection matters because Land Rover Trucks LR4 may run either 19-inch or 20-inch wheel packages, and wear patterns can reveal alignment issues, pressure errors, or prior wheel damage. Catching those problems early helps preserve ride quality and prevents replacing tires before their time. Uneven shoulder wear, vibration, or repeated pressure loss should be investigated before the vehicle is driven extensively.

Tires on a Land Rover Trucks LR4 should be replaced when age, cracking, hardening, impact damage, bulges, or structural concerns appear, even if the tread still looks usable. Low-mileage collector or second-use vehicles often age tires out before they wear them out. Time and environmental exposure can weaken a tire internally long before the tread depth suggests replacement.

That means a Land Rover Trucks LR4 owner should look beyond tread depth and pay attention to the tire’s full condition and age history. If the truck has been stored for long periods or driven infrequently, an aging inspection is especially important before road use. A replacement decision should prioritize structural condition, consistent handling, and safe operation rather than mileage alone.

The fitment range covered here shows Land Rover Trucks LR4 using 255/55R19 across 2010 to 2016 and 255/50R20 from 2011 to 2016, reflecting the two wheel-diameter configurations associated with this model. That indicates original-type fitment depended on the wheel package fitted to the vehicle rather than a single universal size for every LR4. Both are modern metric radial sizes appropriate to the model’s production era.

For an authenticity-minded Land Rover Trucks LR4 owner, the right approach is to match the tire size to the original wheel package on the specific truck. Factory labels, original sales material, and marque references can help confirm whether a given LR4 left with 19-inch or 20-inch wheels. Keeping the correct diameter and overall tire profile supports the proper stance and visual balance.

Correct tire fitment can affect how a Land Rover Trucks LR4 is judged, presented, and valued, especially when buyers or evaluators expect the vehicle to retain its proper wheel-and-tire proportions. A truck wearing the correct 19-inch or 20-inch size for its original configuration will usually look more coherent than one wearing an improvised substitute. Proper fitment also supports accurate stance and wheel-arch fill.

For a Land Rover Trucks LR4 being preserved to a high standard, matching the original wheel diameter and corresponding tire size is more important than chasing cosmetic variations alone. Marque clubs, original literature, and ownership history can help confirm what belongs on a specific vehicle. Even outside formal judging, a correctly fitted tire package tends to inspire more confidence in informed buyers.

Land Rover Trucks LR4 belongs to a modern SUV era where correctness is driven more by the proper tire dimensions and overall road-going character than by antique or wide whitewall sidewall conventions. The two fitments shown here, 255/55R19 and 255/50R20, are contemporary metric radial sizes matched to 19-inch and 20-inch wheels. The correct look starts with choosing the right size for the wheel package.

A restoration-minded Land Rover Trucks LR4 owner should focus on preserving the original visual balance of the truck rather than forcing a sidewall style associated with an earlier era. If authenticity is the goal, compare the present setup with factory photos, period brochures, and original equipment references for the exact trim. The wheel diameter and tire profile will have the biggest impact on a faithful appearance.

Land Rover Trucks LR4 uses modern metric radial tire sizes, and correctly sized, properly maintained tires in sound condition are appropriate for normal public-road use. The main safety issue on this model is not an antique construction question but making sure the tire matches the wheel diameter exactly. A 19-inch tire does not belong on a 20-inch wheel, and a 20-inch tire does not belong on a 19-inch wheel.

Safe road use on a Land Rover Trucks LR4 starts with matching the correct size, maintaining proper inflation, and verifying that the tires are free from age-related or impact-related damage. Because these trucks may be used for family travel, highway driving, or occasional towing, condition matters as much as size. If there is vibration, cracking, irregular wear, or prior wheel damage, inspect before further road use.

Before driving a Land Rover Trucks LR4, check that all four tires match the wheel diameter fitted to the vehicle, that inflation pressures are appropriate, and that there are no visible cuts, bulges, cords, or severe cracks. Also confirm even tread wear and look for nails, sidewall abrasions, or signs of prior impact. On a vehicle with staggered ownership history, confirm the full size code rather than assuming the year identifies the tire.

A quick pre-drive inspection can prevent common problems such as vibration, poor handling, or a damaged tire being put back into service. Land Rover Trucks LR4 may use either 255/55R19 or 255/50R20 depending on wheel package, so checking the sidewall markings is a worthwhile habit. If the truck has been parked for an extended period, inspect more carefully before returning it to regular driving.

A Land Rover Trucks LR4 is a modern-era utility vehicle, so appropriate speed depends on the exact tire fitted, its condition, inflation, and its speed rating rather than on the model alone. The original-type sizes covered here are 255/55R19 and 255/50R20, both modern radial formats intended for regular road use when properly specified. Tire condition remains the deciding factor on any older vehicle still wearing aged rubber.

The sensible approach is to treat the tire itself as the limit, not the vehicle’s capability. Even if a Land Rover Trucks LR4 is designed for sustained road speeds, an aging, damaged, or mismatched tire should not be trusted simply because tread remains. Confirm the tire’s serviceable condition and specification before extended highway driving, especially if the truck has sat unused for long periods.