The 2013 Land Rover Trucks LR4 sits in the modern phase of Land Rover’s boxy, highly capable luxury SUV lineage, combining serious off-road character with the road manners and cabin comfort buyers expected from an upscale utility vehicle. For tire selection, this exact LR4 uses two primary radial sizes, 255/55R19 and 255/50R20, depending on sub-model and wheel setup. That makes the key decision less about vintage-style construction and more about confirming the correct wheel diameter first, then choosing the right tire for the vehicle’s intended use and appearance. On an LR4 that may have seen wheel changes over time, verifying the actual wheels on the vehicle is especially important before purchase.
Which Tire Size Is Right for The 2013 Land Rover Trucks LR4
The 2013 Land Rover Trucks LR4 uses two primary tire sizes, and the right one depends on sub-model and wheel diameter. Both are metric radial sizes, but they mount on different rims, so the first step is confirming whether the vehicle is on 19-inch or 20-inch wheels before comparing tire choices.
255/55R19 is a metric radial size in which 255 is the section width in millimeters, 55 is the aspect ratio, and 19 is the rim diameter in inches. On the 2013 Land Rover Trucks LR4, this size is one of the primary fitments and keeps the vehicle in a modern radial construction suited to contemporary road use. Its overall diameter and section width align closely with the other LR4 fitment, so the main distinction is wheel diameter rather than a dramatic change in tire proportions. This size should be matched to the correct 19-inch wheel setup on the vehicle before selection.
255/50R20 is also a metric radial size, with a 255-millimeter section width, a 50-series aspect ratio, and a 20-inch rim diameter. For the 2013 Land Rover Trucks LR4, this size applies to certain sub-model and wheel combinations, making wheel confirmation essential before moving ahead. Its dimensions remain very close to the 19-inch fitment, but it is built for a different rim diameter and should not be treated as interchangeable without the proper wheel. This size is the relevant choice when the LR4 is equipped with the 20-inch setup.
Sub-model fitment matters on the 2013 Land Rover Trucks LR4 because tire sizing is not completely uniform across the range. Some versions share both available sizes, while the Base model stays with one primary fitment, so confirming the exact sub-model and wheel diameter helps narrow the choice quickly.
1
2013 Land Rover Trucks LR4 Base
The 2013 Land Rover Trucks LR4 Base uses the 255/55R19 radial tire size. That makes tire selection relatively straightforward, with the main job being to confirm the vehicle still carries its 19-inch wheel setup before choosing a replacement.
The 2013 Land Rover Trucks LR4 HSE can use either 255/55R19 or 255/50R20, depending on the wheel configuration on the vehicle. Tire selection starts with checking whether the LR4 is wearing 19-inch or 20-inch wheels rather than assuming one size applies to every HSE.
The 2013 Land Rover Trucks LR4 HSE Lux also uses either 255/55R19 or 255/50R20 depending on how the vehicle is equipped. That means the most important step is verifying the actual wheel diameter on the SUV before comparing tire options in either size.
The tire sizes listed on this page assume factory-standard vehicle configuration. The following modifications may affect tire fitment and are not reflected in this guide:
Suspension changes (lowering, lift kits, spring replacements)
Body alterations (fender modifications, custom bodywork)
If your vehicle has been modified from factory specifications, verify tire clearance before purchase.
Frequently Asked Questions
These FAQs focus on the exact tire sizes used on the 2013 Land Rover Trucks LR4, how fitment changes by sub-model, and what to inspect on the wheels, suspension, and tires before regular road use.
Tire Size & Fitment
What tire size fits a 2013 Land Rover Trucks LR4?
The 2013 Land Rover Trucks LR4 uses two primary tire sizes: 255/55R19 and 255/50R20. Both are radial metric sizes, but they are tied to different wheel diameters, so the correct fitment depends on the specific sub-model and the wheels currently on the vehicle.
Base models use 255/55R19, while HSE and HSE Lux models can use either size depending on their wheel setup. The quickest way to avoid a mismatch is to confirm the exact wheel diameter on the LR4 before selecting tires, especially if the SUV may have had wheels changed at some point.
What size rim does a 2013 Land Rover Trucks LR4 use?
A 2013 Land Rover Trucks LR4 uses either a 19-inch or 20-inch rim, depending on the tire size and configuration. The 255/55R19 tire mounts on a 19-inch rim, and the 255/50R20 tire mounts on a 20-inch rim.
That rim difference is the most important fitment detail on this LR4 because both tire sizes are otherwise very close in overall dimensions. Checking the wheel itself before purchase matters more than relying on trim assumptions alone, particularly on HSE and HSE Lux models that can appear with either setup.
Why does the 2013 Land Rover Trucks LR4 have more than one tire size?
The 2013 Land Rover Trucks LR4 has more than one tire size because different sub-model and wheel combinations were used across the range. The Base model uses 255/55R19, while HSE and HSE Lux versions can use either 255/55R19 or 255/50R20.
In practical terms, this is mostly a wheel-diameter question rather than a change from one tire construction to another, since both sizes are radials. Tire selection should begin with the exact wheel package on the vehicle today, not just the badge on the tailgate or the model name on registration paperwork.
Choosing the Right Tire
What should I consider when choosing a tire for a 2013 Land Rover Trucks LR4?
Start with the correct primary size for the vehicle: 255/55R19 or 255/50R20. On a 2013 Land Rover Trucks LR4, the key factors are matching the tire to the wheel diameter already on the SUV and making sure the size aligns with the exact sub-model and current setup.
After size is confirmed, compare the tire’s intended use against how the LR4 is driven, whether that means mostly pavement, mixed-weather use, or occasional rougher travel. It also helps to inspect for aftermarket wheels or suspension changes, since those can affect clearance and narrow the safe range of tire choices.
How do I choose between the available 2013 Land Rover Trucks LR4 tire sizes?
Choosing between 255/55R19 and 255/50R20 is not a matter of preference alone, because each size is built for a different rim diameter. The right choice for a 2013 Land Rover Trucks LR4 is the one that matches the wheels currently installed on the vehicle.
Base models point you toward 255/55R19, while HSE and HSE Lux models require a closer look at the actual wheels. A quick inspection of the tire sidewall or wheel diameter usually settles the question faster than trim-level assumptions, and it helps prevent ordering a tire that cannot mount to the LR4’s wheels.
How do I choose between the available tires for a 2013 Land Rover Trucks LR4?
Once the correct size is confirmed, choosing among tires for a 2013 Land Rover Trucks LR4 comes down to matching the tire to the vehicle’s use and condition. The size itself must stay correct, but the owner should also consider whether the LR4 sees daily road driving, longer highway trips, or occasional off-pavement travel.
A sound choice also depends on the condition of the vehicle around the tire. Wheel width, alignment condition, suspension wear, and any prior modifications can influence how well a tire works in service, even when the nominal size is correct. That makes a vehicle inspection a useful step before final selection.
Restoration & Appearance
Does correct tire fitment matter for a 2013 Land Rover Trucks LR4 restoration?
Correct tire fitment still matters on a 2013 Land Rover Trucks LR4 restoration or refurbishment, even though this is a modern SUV rather than a vintage bias-ply application. Using the proper 255/55R19 or 255/50R20 size helps preserve the intended stance, wheel relationship, and overall visual balance of the vehicle.
Appearance on an LR4 is closely tied to wheel diameter, so installing the wrong tire size can make the vehicle look off even before drivability issues appear. A careful restoration-minded approach starts by confirming whether the SUV should be on 19-inch or 20-inch wheels, then selecting tires that suit that setup cleanly.
Which tire should I choose for a period-style 2013 Land Rover Trucks LR4?
A period-style approach on a 2013 Land Rover Trucks LR4 begins with using the correct modern radial size for the sub-model and wheel package already on the vehicle. That means 255/55R19 for the Base model, while HSE and HSE Lux examples should be matched to either 19-inch or 20-inch wheels before tire selection.
For a cleaner, more authentic presentation, the tire should support the LR4’s original-era proportions rather than forcing a size that only works visually. Buyers focused on appearance should avoid guessing across the two fitments and instead confirm the wheel setup first, since that choice defines the SUV’s stance more than anything else.
Fitment, Maintenance & Road Use
Can modifications affect tire fitment on a 2013 Land Rover Trucks LR4?
Yes, modifications can affect tire fitment on a 2013 Land Rover Trucks LR4 even when the tire size appears close to stock. Wheel changes, offset differences, suspension alterations, and ride-height changes can all influence whether 255/55R19 or 255/50R20 works properly on the vehicle.
An LR4 with aftermarket wheels should be checked for actual rim diameter and general clearance at the fenders and steering components before new tires are installed. Even small setup changes can alter how a tire sits and moves through its travel, so a visual inspection is worthwhile before committing to either fitment.
What should I inspect before driving a 2013 Land Rover Trucks LR4 on new tires?
Before driving a 2013 Land Rover Trucks LR4 on new tires, inspect the wheels for the correct diameter, check that the tires match side to side, and make sure there is no visible interference at the fenders or steering components. Tire pressure should also be set correctly before regular road use.
It is also smart to look over the suspension and alignment condition, since worn components can affect how a new tire wears and behaves. A short initial drive followed by a recheck for rubbing, uneven clearance, or air loss can help catch setup issues early, especially on an LR4 with prior wheel or suspension changes.
How often should tires on a 2013 Land Rover Trucks LR4 be inspected?
Tires on a 2013 Land Rover Trucks LR4 should be inspected regularly, especially before longer trips and any time the vehicle has been parked for extended periods. Look for low pressure, uneven wear, cuts, bulges, embedded debris, and visible sidewall damage on either 255/55R19 or 255/50R20 tires.
Routine inspection matters because SUVs like the LR4 can hide fitment or wear problems until they become more serious on the road. Checking condition early also helps confirm that the tires are wearing evenly across the tread, which can reveal alignment or suspension issues before they shorten tire life or affect road behavior.
