The 2016 Land Rover Trucks LR4 sits in the later years of Land Rover’s boxy, highly capable Discovery 4 lineage, combining upscale road manners with the upright stance and utility that made the model popular with families and adventure-minded owners alike. That mix of luxury SUV comfort and genuine off-road heritage makes tire choice especially important on this exact vehicle. The 2016 Land Rover Trucks LR4 uses radial tires in two primary sizes, 255/50R20 and 255/55R19, with the first decision centered on confirming which wheel diameter is on the truck. From there, the focus shifts to matching the tire to the vehicle’s intended road use, wheel setup, and overall fitment.
Which Tire Size Is Right for The 2016 Land Rover Trucks LR4
The 2016 Land Rover Trucks LR4 uses two primary tire sizes, and the difference comes down to wheel diameter rather than a change in overall tire height. Both sizes are radial fitments, but one is built for a 20-inch rim and the other for a 19-inch rim. Before choosing a tire, the most important step is confirming which wheels are actually on the vehicle, since all covered sub-models can use either size.
In 255/50R20, the 255 identifies the nominal section width in millimeters, 50 is the aspect ratio, R designates radial construction, and 20 is the wheel diameter in inches. This is a modern metric radial size suited to a 20-inch wheel on the 2016 Land Rover Trucks LR4, making wheel confirmation the key fitment step before anything else. Because this size shares the LR4’s overall tire diameter approach with the 19-inch alternative, the choice is about matching the existing wheel setup rather than changing the vehicle’s basic stance. It is the right size to evaluate when the truck is equipped with 20-inch rims.
In 255/55R19, the 255 is the nominal section width in millimeters, 55 is the aspect ratio, R means radial construction, and 19 indicates the wheel diameter in inches. On the 2016 Land Rover Trucks LR4, this size serves the same general fitment role as the 20-inch option but is built for a 19-inch wheel instead. Its dimensions keep the tire in the same overall size neighborhood, so the practical decision is not appearance alone but correct wheel-to-tire matching. This is the size to pursue when the vehicle retains or uses 19-inch rims.
Tire fitment is straightforward across the covered 2016 Land Rover Trucks LR4 sub-models because Base, HSE, and HSE Lux all use the same two primary tire sizes. The key step is confirming whether the vehicle is on 19-inch or 20-inch wheels before selecting a tire.
1
2016 Land Rover Trucks LR4 Base
The 2016 Land Rover Trucks LR4 Base can use either of the LR4’s two primary radial tire sizes, depending on whether it has 19-inch or 20-inch wheels. Tire selection starts with wheel-diameter confirmation, then moves to choosing the right tire for the vehicle’s current setup and intended use.
The 2016 Land Rover Trucks LR4 HSE follows the same fitment pattern as the rest of the range, with both primary radial sizes associated with this sub-model. That means the sub-model name alone is not enough; the actual wheel diameter on the vehicle needs to be checked before selecting tires.
The 2016 Land Rover Trucks LR4 HSE Lux also uses the same two radial tire sizes found elsewhere in the LR4 lineup. Choosing correctly depends on verifying whether the truck is equipped with 19-inch or 20-inch rims, especially if wheels have ever been changed.
The tire sizes listed on this page assume factory-standard vehicle configuration. The following modifications may affect tire fitment and are not reflected in this guide:
Suspension changes (lowering, lift kits, spring replacements)
Body alterations (fender modifications, custom bodywork)
If your vehicle has been modified from factory specifications, verify tire clearance before purchase.
Frequently Asked Questions
Tire questions for the 2016 Land Rover Trucks LR4 usually center on choosing between 255/50R20 and 255/55R19, confirming rim fitment, and checking how wheel changes or maintenance issues affect safe road use. These answers focus on that exact LR4 fitment decision.
Tire Size & Fitment
What tire size fits a 2016 Land Rover Trucks LR4?
The 2016 Land Rover Trucks LR4 uses two primary tire sizes: 255/50R20 and 255/55R19. Both are radial sizes, and both appear across the LR4 range, including Base, HSE, and HSE Lux models.
The important difference is wheel diameter. A 255/50R20 belongs on a 20-inch rim, while a 255/55R19 belongs on a 19-inch rim. Since either size may be correct depending on the wheel setup, checking the actual wheels on the vehicle matters more than relying on trim name alone, especially if the LR4 has had wheel changes at any point.
What size rim does a 2016 Land Rover Trucks LR4 use?
A 2016 Land Rover Trucks LR4 uses either a 19-inch or 20-inch rim, depending on which of its two primary tire sizes is on the vehicle. The 255/55R19 size matches a 19-inch rim, and the 255/50R20 size matches a 20-inch rim.
That makes rim confirmation the first fitment step before choosing replacement tires. Looking at the tire sidewall or measuring the wheel setup already on the vehicle is the safest approach. If the LR4 has aftermarket wheels, verify both the diameter and the wheel width before selecting a tire, since the trim level itself does not narrow the choice to one size.
Do all 2016 Land Rover Trucks LR4 sub-models use the same tire size?
Base, HSE, and HSE Lux versions of the 2016 Land Rover Trucks LR4 all share the same two primary tire sizes: 255/50R20 and 255/55R19. In that sense, the sub-models follow the same fitment pattern rather than using separate size assignments.
The practical takeaway is that tire selection still depends on the actual wheels installed on the vehicle. A trim badge does not tell the whole story because each covered sub-model can be paired with either the 19-inch or 20-inch tire size. Checking the tire sidewall and confirming the wheel diameter prevents ordering a correct LR4 size for the wrong wheel.
Choosing the Right Tire
What should I consider when choosing a 255/50R20 or 255/55R19 tire for a 2016 Land Rover Trucks LR4?
Start with the correct size for the wheel that is actually on the 2016 Land Rover Trucks LR4. The two primary fitments are 255/50R20 for 20-inch rims and 255/55R19 for 19-inch rims, and both are radial sizes with similar overall dimensions.
Once the size is confirmed, compare the tire’s intended use with how the LR4 is driven. A vehicle used mainly on-road may call for different tread priorities than one that sees rougher terrain or heavier utility use. It also helps to verify wheel width, load suitability, and clearance on any vehicle that has been modified from its original wheel or suspension setup.
How do I choose between the available 2016 Land Rover Trucks LR4 tire sizes?
The choice between 255/50R20 and 255/55R19 is not a matter of preference alone; it depends on wheel diameter. A 2016 Land Rover Trucks LR4 with 20-inch wheels uses 255/50R20, while one with 19-inch wheels uses 255/55R19.
Because both sizes share the same general overall diameter, the main issue is correct wheel matching rather than trying to alter the vehicle’s stance. A quick look at the existing tire sidewall usually settles the question. If the LR4 was purchased used or has upgraded wheels, confirm the current setup before comparing tread designs or other tire characteristics.
What rim-fitment details should I compare when choosing 2016 Land Rover Trucks LR4 tires?
For a 2016 Land Rover Trucks LR4, the most important rim-fitment detail is diameter. The vehicle uses either a 19-inch rim with 255/55R19 tires or a 20-inch rim with 255/50R20 tires, and mixing those sizes with the wrong wheel diameter is not correct.
Wheel width and overall vehicle setup matter as well, especially on an SUV that may have seen aftermarket changes. Checking the wheel’s actual size, confirming the tire size already mounted, and looking for adequate steering and suspension clearance can prevent problems. That is particularly worthwhile if the LR4 has non-original wheels, suspension changes, or signs of uneven tire wear.
Restoration & Appearance
Does correct tire fitment matter for a 2016 Land Rover Trucks LR4 restoration or preservation project?
Yes. Even on a newer collector-leaning SUV like the 2016 Land Rover Trucks LR4, correct tire fitment helps preserve the vehicle’s stance, wheel relationship, and overall presentation. Using the proper 255/50R20 or 255/55R19 size keeps the tire matched to the wheel diameter intended for that setup.
Appearance is only one part of the decision. Proper fitment also supports predictable clearance and avoids an obviously mismatched wheel-and-tire combination. Owners focused on originality or preservation should confirm the wheel setup already on the vehicle and compare it with period photos, window-sticker documentation, or marque-specific references if exact presentation matters as much as basic road use.
Which tire fitment should I keep for a period-appropriate 2016 Land Rover Trucks LR4 look?
A period-appropriate look starts with keeping the tire size matched to the wheel diameter already on the vehicle. On the 2016 Land Rover Trucks LR4, that means 255/55R19 for 19-inch rims or 255/50R20 for 20-inch rims, both in radial construction.
That approach preserves the LR4’s intended visual balance more effectively than forcing an incorrect size onto the wrong wheel. For owners trying to maintain a showroom-era appearance, it is worth confirming whether the truck still wears its original wheel style or has been changed over time. The closer the wheel setup is to period specification, the easier tire selection becomes.
Fitment, Maintenance & Road Use
Can modifications affect tire fitment on a 2016 Land Rover Trucks LR4?
Yes. Wheel changes, suspension modifications, ride-height adjustments, and body alterations can all affect tire fitment on a 2016 Land Rover Trucks LR4, even when the tire size itself appears correct. That matters with both 255/50R20 and 255/55R19 because each size depends on the right wheel diameter and adequate clearance.
A used LR4 may already have aftermarket wheels or altered suspension, so checking the current setup is worthwhile before replacing tires. Look at wheel diameter, wheel width, and available clearance at full steering lock and suspension movement. Uneven wear can also point to alignment or suspension issues that should be addressed before putting the vehicle back into regular road use.
What should I inspect before driving a 2016 Land Rover Trucks LR4 on new tires?
Before driving a 2016 Land Rover Trucks LR4 on new tires, inspect the wheels for correct diameter and visible damage, and make sure the installed tire size matches the wheel setup. It is also smart to check valve stems, inflation pressure, lug hardware, and the general condition of the suspension and steering components.
A short post-installation check is just as useful as the pre-drive inspection. Watch for rubbing, vibration, pull, or unusual noise once the vehicle is moving. Any of those signs can point to a clearance issue, balancing problem, or alignment concern. On an SUV like the LR4, confirming that everything remains stable through turns and braking adds another layer of confidence.
How often should tires on a 2016 Land Rover Trucks LR4 be inspected?
Tires on a 2016 Land Rover Trucks LR4 should be inspected regularly, not only by mileage interval but also by time and use. Pressure, tread condition, visible cuts, punctures, bulges, and sidewall cracking all deserve routine attention, especially on a vehicle that may alternate between daily use and longer parked periods.
A quick visual check before trips and a more thorough inspection at regular service intervals can catch small problems early. It also helps to look for uneven wear that may suggest alignment, suspension, or inflation issues. On any LR4 that sees light use, age and condition matter almost as much as tread depth, since deterioration can develop even when miles stay low.
