2018 Honda Trucks covered a broad slice of the crossover, SUV, and light-truck market, from the compact HR-V and CR-V to the family-sized Pilot and unibody Ridgeline pickup. By this point Honda was firmly in the modern radial era, so tire choice is less about vintage construction and more about matching the right metric size to the right model and wheel diameter. Across four models, five tire sizes appear, with some shared fitment between Pilot and Ridgeline while CR-V and HR-V use their own model-specific sizes. The first thing to confirm on a 2018 Honda Trucks vehicle is the exact model and wheel diameter before narrowing down the correct tire size.
Which Tire Size Is Right for Your 2018 Honda Trucks
Five tire sizes are used across 2018 Honda Trucks vehicles, and they vary by model rather than being shared across the full range. Every size here is a radial, so the key decision is confirming the correct model and wheel diameter first, especially because these fitments span 17-, 18-, and 20-inch wheels. Understanding that distinction before choosing a product saves time and helps match the tire to the vehicle correctly.
Year(s): 2018|Fit(s): CR-V|Construction: Radial|Rim: 18 in
235/60R18 is a metric radial size with a 235-millimeter section width, a 60-series aspect ratio, and an 18-inch rim diameter. This size is specific to the CR-V, and product details here do not add brand, sidewall, tube, or speed-rating variety to compare within the size. For a 2018 Honda Trucks CR-V running 18-inch wheels, this is the size to confirm against the actual tire sidewall and wheel before moving on to product selection.
Year(s): 2018|Fit(s): CR-V|Construction: Radial|Rim: 17 in
235/65R17 is a metric radial size that denotes a 235-millimeter section width, a 65-series aspect ratio, and a 17-inch rim diameter. This size is specific to the CR-V, and product details here do not establish brand, sidewall, tube, or speed-rating variation within the size. For a 2018 Honda Trucks CR-V equipped with 17-inch wheels, the practical step is verifying that wheel diameter first, since this size is not shared across the rest of the Honda Trucks range.
Year(s): 2018|Fit(s): HR-V|Construction: Radial|Rim: 17 in
215/55R17 is a metric radial size with a 215-millimeter section width, a 55-series aspect ratio, and a 17-inch rim diameter. BFGoodrich offers this size in Blackwall form, and both available products carry a W speed rating with a 168 mph ceiling and rim-width compatibility from 6.0 to 7.5 inches; one version is rated at 1,653 pounds at 50 psi. This size is specific to the HR-V, so buyers should match the exact 17-inch fitment and then choose between available product lines within the same overall size.
Year(s): 2018|Fit(s): Pilot, Ridgeline|Construction: Radial|Rim: 18 in
245/60R18 is a metric radial size that uses a 245-millimeter section width, a 60-series aspect ratio, and an 18-inch rim diameter. This size is shared by the Pilot and Ridgeline, and product details here do not add brand, sidewall, tube, or speed-rating variation to compare within the size. For 2018 Honda Trucks buyers, this is the crossover point in the range where one size serves more than one model, but it still needs to be confirmed against the actual Pilot or Ridgeline wheel setup.
Year(s): 2018|Fit(s): Pilot|Construction: Radial|Rim: 20 in
245/50R20 is a metric radial size with a 245-millimeter section width, a 50-series aspect ratio, and a 20-inch rim diameter. This size is specific to the Pilot, and product details here do not establish brand, sidewall, tube, or speed-rating differences within the size. For a 2018 Honda Trucks Pilot on 20-inch wheels, this fitment is the one to verify first because it is unique within the model range and does not interchange with the 17- or 18-inch options.
Four Honda Trucks models are covered for 2018, spanning compact crossovers, a three-row SUV, and a midsize pickup. Tire size varies by model, and in some cases by wheel package within the same model, so identifying the exact vehicle is more important here than relying on year and make alone. Select a model below for model-specific fitment history and product options.
2018 Honda Trucks CR-V
The 2018 CR-V was Honda's high-volume compact crossover, known for blending family practicality with a more car-like driving feel than many traditional SUVs. It uses either 17-inch or 18-inch tire fitments depending on wheel package, so CR-V owners should confirm the wheel already on the vehicle before choosing a replacement tire.
The 2018 HR-V sat below the CR-V as Honda's smaller crossover, with a packaging-focused design that emphasized versatility in a compact footprint. Its tires mount on 17-inch wheels in this fitment group, making size confirmation straightforward once the model is identified.
The 2018 Pilot was Honda's larger family SUV, aimed at buyers who needed three-row space and a more substantial road presence than the CR-V or HR-V. It appears with both 18-inch and 20-inch tire fitments, so Pilot owners need to verify which wheel package the vehicle carries before selecting a size.
The 2018 Ridgeline occupied a distinctive place in the midsize pickup market with its unibody construction and strong overlap with Honda SUV engineering. In this fitment group it uses an 18-inch tire size shared with one Pilot application, so Ridgeline owners should still confirm the sidewall size on the truck rather than assuming all Honda Trucks 18-inch tires interchange.
Two products are available across one tire size for 2018 Honda Trucks vehicles. The 215/55R17 size for the HR-V includes two BFGoodrich radial Blackwall choices. Confirm the exact size on the vehicle before selecting a tire.
These FAQs cover how 2018 Honda Trucks tire sizes differ by model, how to decode the metric sizing used across the range, what product choices exist for the HR-V fitment, and what to check for routine use and longer drives.
Size Basics & Fitment
What tire sizes fit 2018 Honda Trucks vehicles?
2018 Honda Trucks vehicles use five tire sizes across four models: 235/60R18 and 235/65R17 for the CR-V, 215/55R17 for the HR-V, 245/60R18 for the Pilot and Ridgeline, and 245/50R20 for the Pilot. The rim diameters in this group are 17, 18, and 20 inches, so these sizes are not interchangeable across the full model range. Rim-width guidance is available for 215/55R17 at 6.0 to 7.5 inches.
That means a buyer with a 2018 Honda Trucks vehicle needs to identify the model first and then confirm the wheel diameter already on the vehicle. The CR-V and Pilot each span more than one tire size because wheel packages differ, while the HR-V and Ridgeline each stay with one fitment in this group. Checking the sidewall on the current tire is usually the quickest way to confirm which size the vehicle actually uses.
What does 215/55R17 mean on a 2018 Honda Trucks tire?
On a 2018 Honda Trucks tire, 215/55R17 is a metric radial size. The 215 is the nominal section width in millimeters, 55 is the aspect ratio, meaning the sidewall height is 55 percent of the section width, R indicates radial construction, and 17 is the wheel diameter in inches. In this year and make, that size applies to the HR-V.
Understanding that code matters because it tells you both the wheel diameter and the tire's overall profile family. A 215/55R17 cannot simply be swapped for an 18-inch or 20-inch fitment from another 2018 Honda Trucks model, even if the vehicles are closely related in brand or platform philosophy. Once the size is confirmed, you can compare products within that exact fitment instead of comparing across incompatible wheel diameters.
Do all 2018 Honda Trucks models use the same tire size?
No, 2018 Honda Trucks models do not all use the same tire size. The HR-V uses 215/55R17, the CR-V uses either 235/65R17 or 235/60R18, the Pilot uses either 245/60R18 or 245/50R20, and the Ridgeline uses 245/60R18. Only the 245/60R18 fitment is shared, and that is between the Pilot and Ridgeline.
For practical purposes, year and make alone are not enough to choose tires for a 2018 Honda Trucks vehicle. You also need the model, and for CR-V and Pilot applications, you need the wheel diameter already on the vehicle. That extra step prevents common mistakes such as ordering a correct-looking metric size that still will not fit the wheel because the rim diameter is different.
Buying the Right Tire
What sidewall styles are available for 2018 Honda Trucks tires?
Within the available 2018 Honda Trucks products here, the 215/55R17 fitment is offered in Blackwall form. That aligns with the modern OEM-style appearance expected on a late-model Honda crossover rather than the wide whitewall, narrow whitewall, or vintage sidewall treatments associated with earlier collector vehicles. No alternate sidewall treatment appears within this product group.
For most 2018 Honda Trucks owners, sidewall choice is less about restoration authenticity and more about maintaining a clean factory-style look. If the vehicle is an HR-V using 215/55R17, a Blackwall tire keeps the appearance consistent with the era and market position of the vehicle. For other Honda Trucks fitments in this year, the first priority remains confirming the exact size before narrowing the appearance details.
What brands make tires for 2018 Honda Trucks vehicles?
BFGoodrich supplies the available 215/55R17 products used on the 2018 Honda Trucks HR-V. Both choices are radial Blackwall tires within the brand's performance-oriented passenger tire lines. No additional brand coverage appears within the available products for the other 2018 Honda Trucks sizes in this group.
Brand comparison matters most once the exact tire size is already confirmed, because a strong brand offering in one Honda Trucks fitment does not mean the same product exists in the other sizes used by the CR-V, Pilot, or Ridgeline. If you are shopping for an HR-V, BFGoodrich is the relevant brand to compare here. If you own one of the other models, verify the tire size first and then evaluate products built for that exact fitment.
What is the difference between BFGoodrich g-Force COMP-2 A/S and BFGoodrich g-Force Phenom T/A for the 2018 Honda Trucks HR-V?
For the 2018 Honda Trucks HR-V in 215/55R17, both BFGoodrich options share the same size, radial construction, Blackwall styling, W speed rating, 17-inch rim diameter, and a 6.0 to 7.5 inch rim-width range. Their weights are also very close at 26 pounds for the g-Force COMP-2 A/S and 26.12 pounds for the g-Force Phenom T/A. The Phenom T/A carries a stated load figure of 1,653 pounds at 50 psi.
That makes this a comparison within the same fitment family rather than a question of one tire physically fitting and the other not. An HR-V owner should treat the two as parallel 215/55R17 choices and then compare the specific product characteristics that matter most for driving style and intended use. The important point is that both stay within the same wheel-diameter and basic fitment envelope for the vehicle.
Fitting & Setup
What rim width do 2018 Honda Trucks tires require?
Rim-width guidance is available here for the 2018 Honda Trucks 215/55R17 size, which fits a 6.0 to 7.5 inch wheel width. That fitment is used on the HR-V. The other Honda Trucks sizes in this year group are identified by rim diameter, but no wheel-width range accompanies them here.
Rim width matters because the correct tire size still needs to sit on a wheel that falls within the tire maker's approved range. If you have a 2018 Honda Trucks HR-V, that 6.0 to 7.5 inch specification gives you a direct check against the actual wheel. For CR-V, Pilot, and Ridgeline applications, confirm the sidewall size first and then compare the wheel against the chosen tire's specific rim-width requirement before installation.
Do 2018 Honda Trucks tires require inner tubes?
The available 2018 Honda Trucks 215/55R17 products are modern radial passenger tires, and no tube-type marking appears in the size descriptions for them. That points toward a tubeless setup in normal use for that fitment. No tube variation is indicated within the two available HR-V products.
For a late-model Honda application, the practical concern is usually the condition of the wheel, valve stem, and bead-sealing surfaces rather than sourcing an inner tube. If you are replacing tires on a 2018 Honda Trucks HR-V, inspect the valve stems and wheel sealing areas at the same time. For the other Honda Trucks sizes in this year group, confirm the specific product's sidewall and specifications before assuming setup details.
Can the original 2018 Honda Trucks wheels be used with all tire sizes?
Original 2018 Honda Trucks wheels cannot be treated as universal across all five tire sizes because the fitments span 17-inch, 18-inch, and 20-inch rim diameters. A 17-inch tire fits only a 17-inch wheel, an 18-inch tire fits only an 18-inch wheel, and a 20-inch tire fits only a 20-inch wheel. The only shared fitment in this group is 245/60R18, which appears on both Pilot and Ridgeline applications.
That means wheel-diameter confirmation should happen before any discussion of tire brand or tread design. A CR-V owner choosing between 235/65R17 and 235/60R18, or a Pilot owner choosing between 245/60R18 and 245/50R20, needs to match the tire to the wheel already on the vehicle unless the wheel package is being changed deliberately. Even when two models share an 18-inch diameter, verify the exact sidewall size rather than assuming every 18-inch Honda Trucks tire will interchange.
Maintenance, Storage & Longevity
How should I store a 2018 Honda Trucks when the tires are fitted?
A 2018 Honda Trucks vehicle should be stored away from direct sunlight, standing moisture, and ozone-producing equipment such as electric motors, air compressors, or welders. Keep the tires clean, maintain proper inflation, and move the vehicle periodically if it will sit for an extended period. Because these are modern radial applications, they generally tolerate storage better than older bias-ply designs, but long static periods can still encourage flat spotting and pressure loss.
Collectors and low-mileage owners often focus on tread depth, but storage conditions usually age a tire out before wear does on a modern specialty-use vehicle. If a 2018 Honda Trucks crossover, SUV, or pickup will remain parked for months, occasional repositioning or support stands can reduce stress concentration on one contact patch. A breathable indoor environment with stable temperatures is better for long-term tire condition than a damp garage or outdoor parking.
How long do tires on a 2018 Honda Trucks typically last?
On a 2018 Honda Trucks vehicle, tire life should be judged by age and condition as much as by mileage. A good rule is to evaluate tires carefully once they reach roughly five to seven years of service and to consider replacement around the ten-year mark regardless of tread depth. The DOT date code on the sidewall gives the tire's week and year of manufacture.
That age-based approach is especially important for vehicles that are driven infrequently, because rubber compounds can harden and crack long before the tread is worn out. A 2018 Honda Trucks owner may still see decent-looking tread on a lightly used vehicle while the tire itself has passed its most dependable service window. Regular inspections and realistic age tracking are more valuable than relying on mileage alone.
How often should tires on a 2018 Honda Trucks be inspected?
Tires on a 2018 Honda Trucks vehicle should be inspected before every drive, and more thoroughly before any longer trip. Look for cracking, bulges, punctures, irregular tread wear, and signs of impact damage on the sidewall. Pressure checks are equally important, since underinflation can affect handling, braking feel, and tread life long before visible damage appears.
A quick walk-around catches many problems before they become roadside issues, particularly on vehicles that may sit between uses. For a 2018 Honda Trucks HR-V running 215/55R17 products, it also makes sense to inspect valve stems and confirm the tire is holding air consistently over time. On CR-V, Pilot, and Ridgeline applications, the same routine helps confirm that the tire fitted to the vehicle still matches the intended size and wheel package.
Safety & Road Use
Are 2018 Honda Trucks tires safe for highway driving?
2018 Honda Trucks vehicles use modern radial tire sizes, and the available 215/55R17 HR-V products carry a W speed rating, which corresponds to a 168 mph ceiling. That far exceeds normal U.S. highway speeds, so in ordinary road use the condition, inflation, and age of the tire are usually more important safety factors than the speed symbol itself. The other fitments in this year group are also radial, which is the standard construction for modern highway driving.
Highway safety still depends on the complete vehicle, not the tire in isolation. A 2018 Honda Trucks owner should match the correct size to the correct wheel, maintain proper inflation, and avoid using aged or damaged tires simply because tread remains. Before regular higher-speed use, confirm the exact speed and service description on the chosen tire so it aligns with how the vehicle is actually driven.
What inflation pressure should I use for 2018 Honda Trucks tires?
Inflation pressure for a 2018 Honda Trucks vehicle should follow the factory vehicle placard or owner's manual for the exact model and wheel package, because those figures are vehicle-specific rather than universal across all five sizes. One available 215/55R17 product is rated to carry 1,653 pounds at 50 psi, but that is the tire's maximum load-and-pressure reference, not a blanket operating pressure for every Honda Trucks application. Pressure should always be matched to the vehicle requirement first.
That distinction matters because using a tire's maximum sidewall pressure as a routine setting can produce an overinflated ride and uneven wear if the vehicle calls for less. Check pressure cold, adjust it to the placard specification, and recheck whenever ambient temperatures swing significantly. If the vehicle has changed wheel or tire package from stock, compare both the vehicle recommendation and the tire maker's guidance before settling on a final operating pressure.
What should I check before taking a 2018 Honda Trucks on a longer drive?
Before a longer drive in a 2018 Honda Trucks vehicle, inspect all tires for cuts, bulges, exposed cords, sidewall cracking, and uneven tread wear, then confirm cold inflation pressure and look over the valve stems. Check that the spare is present and usable if the vehicle is equipped with one, and make sure the tire size on the vehicle matches the intended wheel package. Any vibration, slow leak, or recent curb impact deserves attention before departure.
A longer trip also calls for a broader mechanical check, especially on a vehicle that may not be driven daily. Brakes, suspension condition, alignment behavior, and fluid levels all influence how the tires perform once the miles add up. Starting with a sound, correctly sized, properly inflated tire is one of the easiest ways to reduce avoidable trouble and make the rest of the vehicle's systems easier to trust on the road.
