The 2018 Honda Trucks CR-V sits in the modern compact crossover segment where everyday comfort, confident road manners, and all-season usability matter as much as styling. By this generation, the CR-V had become a familiar choice for drivers who wanted practical space without moving up to a larger SUV. Tire fitment centers on two radial sizes, 235/65R17 and 235/60R18, with the exact size depending on sub-model and wheel package. That makes the real decision less about vintage-style construction choices and more about confirming trim, wheel diameter, and the type of road-focused tire presentation you want. Getting that right helps preserve ride quality, clearance, and the CR-V’s intended balance of comfort and control.
Which Tire Size Is Right for The 2018 Honda Trucks CR-V
The 2018 Honda Trucks CR-V uses two primary tire sizes, and the correct one depends on the sub-model because wheel diameter changes between 17-inch and 18-inch applications. Both fitments are radial metric sizes, so the first step is confirming the exact trim level and verifying the wheel diameter currently on the vehicle before comparing tire options.
In 235/60R18, the 235 identifies nominal section width in millimeters, 60 is the aspect ratio, R denotes radial construction, and 18 is the wheel diameter in inches. This is a modern radial fitment suited to 18-inch wheel applications on the 2018 Honda Trucks CR-V. Its dimensions support a contemporary crossover tire profile rather than an older bias-ply sizing system. This size should be evaluated when the vehicle is one of the sub-models equipped with 18-inch wheels, with wheel diameter and current vehicle setup confirmed before selection.
In 235/65R17, the 235 is the nominal tire width in millimeters, 65 is the aspect ratio, R marks radial construction, and 17 indicates the required wheel diameter in inches. This radial size belongs to 17-inch wheel applications on the 2018 Honda Trucks CR-V and carries the same basic modern metric logic as other contemporary crossover tires. Its overall dimensions are close in purpose to the 18-inch fitment, but it is not the same tire size. Use this size only after confirming the vehicle’s trim and actual wheel diameter.
Sub-model fitment matters on the 2018 Honda Trucks CR-V because tire size changes with the wheel package. Three covered sub-models use the 18-inch radial fitment, while the LX uses the 17-inch radial size, so trim identification should come before tire selection.
1
2018 Honda Trucks CR-V EX
The 2018 Honda Trucks CR-V EX uses the 235/60R18 radial tire size. That makes wheel-diameter confirmation especially important if the vehicle has had wheels changed, since product comparison should stay within the correct 18-inch fitment.
The 2018 Honda Trucks CR-V EX-L also uses the 235/60R18 radial size. Tire selection for this sub-model centers on choosing the right 18-inch metric radial after confirming the current wheels and checking for any modifications that could affect clearance.
The 2018 Honda Trucks CR-V LX uses the 235/65R17 radial tire size. This places the focus on the 17-inch wheel setup, so staying with the correct size and verifying the actual wheel package are the key steps before replacement.
The 2018 Honda Trucks CR-V Touring uses the 235/60R18 radial size like the EX and EX-L. Buyers should confirm that the vehicle still carries its 18-inch wheels before choosing tires, especially if aftermarket wheel changes are possible.
The tire sizes listed on this page assume factory-standard vehicle configuration. The following modifications may affect tire fitment and are not reflected in this guide:
Suspension changes (lowering, lift kits, spring replacements)
Body alterations (fender modifications, custom bodywork)
If your vehicle has been modified from factory specifications, verify tire clearance before purchase.
Frequently Asked Questions
Common 2018 Honda Trucks CR-V tire questions usually come down to trim-specific sizing, 17-inch versus 18-inch wheel fitment, and what to inspect before replacing tires on a vehicle that may no longer have its original wheel setup.
Tire Size & Fitment
What tire size fits a 2018 Honda Trucks CR-V?
The 2018 Honda Trucks CR-V uses either 235/60R18 or 235/65R17, depending on the sub-model. EX, EX-L, and Touring models use 235/60R18, while the LX uses 235/65R17. Both are modern radial metric sizes rather than older alphanumeric or bias-ply fitments.
The important next step is matching the tire to the actual wheel diameter on the vehicle, not just the model year. A CR-V with replacement wheels may no longer carry its original trim-based setup, so check the sidewall of the current tires and confirm the wheel size before ordering replacements.
What size rim does a 2018 Honda Trucks CR-V use?
A 2018 Honda Trucks CR-V uses either a 17-inch or 18-inch rim, depending on the trim. The 235/65R17 tire fits the 17-inch application, while the 235/60R18 tire fits the 18-inch application. The tire size itself tells you the required rim diameter in the final number.
That rim diameter is the first fitment check because a 17-inch tire cannot be mounted on an 18-inch wheel, and vice versa. If the CR-V has aftermarket wheels, verify the actual wheel diameter on the vehicle before choosing a tire, then compare the full size rather than relying on trim name alone.
Do all 2018 Honda Trucks CR-V sub-models use the same tire size?
No, the covered 2018 Honda Trucks CR-V sub-models do not all use the same tire size. EX, EX-L, and Touring models use 235/60R18, while the LX uses 235/65R17. The difference comes from the wheel package, so the correct tire size follows the trim and rim diameter together.
That means sub-model identification matters before comparing tires. It is also smart to verify what is physically on the vehicle today, because wheel changes can alter the original setup. Matching the replacement tire to both the current wheel diameter and the intended CR-V configuration helps avoid preventable fitment mistakes.
Choosing the Right Tire
What should I consider when choosing a tire for a 2018 Honda Trucks CR-V?
Start with the correct size for the specific 2018 Honda Trucks CR-V sub-model: 235/65R17 for LX or 235/60R18 for EX, EX-L, and Touring. Both are radial metric fitments, so the main selection factors are correct sizing, wheel compatibility, and choosing a tire that suits the vehicle’s intended daily road use.
After size is confirmed, check the current wheel setup, especially if the CR-V may have replacement wheels. It also helps to compare how the vehicle is used, such as commuting, highway driving, or mixed weather service. A tire choice makes more sense when it matches the wheel diameter, vehicle setup, and everyday driving priorities.
How do I choose between 235/60R18 and 235/65R17 for a 2018 Honda Trucks CR-V?
You do not choose between those two sizes based on preference alone, because each belongs to a different wheel diameter and trim application on the 2018 Honda Trucks CR-V. The LX uses 235/65R17, while EX, EX-L, and Touring use 235/60R18. Both are valid CR-V sizes, but not on the same wheel.
The deciding factor is the wheel currently on the vehicle. Check the sidewall of the existing tire or measure the wheel diameter if there is any doubt, especially on a used CR-V. Staying with the correct diameter-specific size helps preserve proper mounting, predictable clearance, and the overall fitment balance intended for the crossover.
Should I match the current tire size on my 2018 Honda Trucks CR-V or go by the trim?
The safest starting point is to confirm both the trim and the tire size currently mounted on the 2018 Honda Trucks CR-V. Trim tells you the original application among the covered sub-models, but the vehicle may now carry different wheels. That makes the current mounted size an important real-world fitment check.
Using only the trim name can lead to mistakes if a previous owner changed wheel diameter. Using only the existing tire can also be risky if an incorrect size was installed earlier. Comparing the trim-based fitment with the actual wheel and tire already on the vehicle gives a clearer path before selecting replacements.
Restoration & Appearance
Does correct tire fitment matter for a 2018 Honda Trucks CR-V restoration or refresh?
Yes, correct tire fitment still matters on a 2018 Honda Trucks CR-V even if the project is more of a clean refresh than a traditional restoration. The right size preserves the intended relationship between tire, wheel, and body, and it keeps the vehicle aligned with its trim-specific 17-inch or 18-inch setup.
Appearance is part of that decision, but fitment comes first. A CR-V that sits on the proper size usually looks more settled and consistent with its original wheel package. Before making cosmetic changes, confirm wheel diameter and use the tire size that belongs with that setup so the finished vehicle looks coherent and drives properly.
How does tire size affect the appearance of a 2018 Honda Trucks CR-V?
Tire size has a visible effect on the stance and wheel-to-tire relationship of a 2018 Honda Trucks CR-V because the model uses either 235/65R17 or 235/60R18 depending on trim. Even though both are close in overall purpose, the sidewall-to-wheel balance changes with the 17-inch and 18-inch combinations.
That matters most when replacing wheels or refreshing the vehicle’s overall look. A size that does not belong with the wheel package can make the CR-V appear off-balance and may introduce clearance or mounting issues. Matching the tire to the correct wheel diameter is the best starting point for a clean, factory-inspired presentation.
Fitment, Maintenance & Road Use
Can modifications affect tire fitment on a 2018 Honda Trucks CR-V?
Yes, modifications can affect tire fitment on a 2018 Honda Trucks CR-V even when the vehicle starts with one of the correct stock sizes. Wheel changes, altered offsets, suspension lowering, and body modifications can all change how a 235/60R18 or 235/65R17 sits in the wheel opening and turns through its full range.
That is why replacement should begin with the actual setup on the vehicle rather than year alone. Check wheel diameter first, then inspect wheel width, inner clearance, and outer fender space before changing tires. A CR-V with stock dimensions is straightforward, but modified examples deserve a closer fitment review.
What should I inspect before driving a 2018 Honda Trucks CR-V on new tires?
Before driving a 2018 Honda Trucks CR-V on new tires, inspect the wheel diameter, confirm the installed size, and make sure each tire is properly seated and inflated. It also helps to look over the wheels for damage and check that lug hardware is secure and appropriate for the wheel design in use.
A short follow-up inspection after initial road use is worthwhile, especially if the vehicle has seen wheel changes or recent suspension work. Listen for rubbing, check steering clearance at full lock, and watch for uneven behavior that could point to alignment or clearance issues. That extra review helps catch fitment problems early.
How often should tires on a 2018 Honda Trucks CR-V be inspected?
Tires on a 2018 Honda Trucks CR-V should be inspected regularly, not just when tread appears low. Look for uneven wear, cuts, punctures, sidewall damage, and pressure loss during routine vehicle checks, and give the tires a closer inspection before longer highway trips or seasonal weather changes.
Regular inspection matters even more if the CR-V is driven infrequently or sits for stretches between uses. Tires can age, lose pressure, or develop issues that are easy to miss at a glance. Keeping an eye on condition and inflation helps protect ride quality, road manners, and overall confidence in the vehicle.
