2006 Mitsubishi Trucks covered a broad range of utility-focused vehicles, from crossover SUVs like the Outlander and Endeavor to the body-on-frame Montero and pickup-based Raider. That spread means tire selection is not one-size-fits-all, even within the same model year. Across four models, seven radial sizes appear, with some sizes unique to a single model and one shared between the Montero and Raider, so the real choice starts with identifying the exact model and wheel diameter rather than comparing brands alone. Before choosing a tire for 2006 Mitsubishi Trucks, confirm whether you have a 16-inch or 17-inch fitment and then narrow the selection to the size used by your specific model.
Which Tire Size Is Right for Your 2006 Mitsubishi Trucks
Seven tire sizes fit 2006 Mitsubishi Trucks vehicles, and they vary by model rather than carrying across the full lineup. Because these sizes span both 16-inch and 17-inch wheels, the first step is confirming the correct rim diameter for your Endeavor, Montero, Outlander, or Raider. Understanding that difference before choosing a product saves time and helps you match the right size to the right vehicle.
235/65R17 is a metric radial size with a 235-millimeter section width, a 65-series aspect ratio, and a 17-inch rim diameter. This size is specific to the Endeavor within the 2006 Mitsubishi Trucks range. It is the size to focus on when your priority is matching the Endeavor's original fitment category and confirming the tire against the actual wheel before ordering.
265/65R17 is a metric radial size with a 265-millimeter section width, a 65-series aspect ratio, and a 17-inch rim diameter. BFGoodrich offers this size in radial construction, and speed ratings or tube details should be checked on the specific product sidewall if you are comparing options. Because it fits both the Montero and certain Raider applications, this is one of the few sizes shared across more than one 2006 Mitsubishi Trucks model and should be chosen only after confirming the exact wheel and model.
Year(s): 2006|Fit(s): Outlander|Construction: Radial|Rim: 16 in
225/60R16 is a metric radial size with a 225-millimeter section width, a 60-series aspect ratio, and a 16-inch rim diameter. It is available from Goodyear and BFGoodrich with Raised Yellow Letter, redline, pin white stripe, and wide whitewall sidewall treatments. This Outlander-specific size gives buyers the widest appearance range on the page, making it especially relevant for owners who want a custom look while staying within the correct basic fitment.
Year(s): 2006|Fit(s): Outlander|Construction: Radial|Rim: 17 in
215/55R17 is a metric radial size with a 215-millimeter section width, a 55-series aspect ratio, and a 17-inch rim diameter. BFGoodrich offers it in blackwall form, and both available products carry a W speed rating with a 168 mph ceiling. This size is specific to certain Outlander applications and suits buyers who need the 17-inch fitment rather than the Outlander's alternate 16-inch size.
Year(s): 2006|Fit(s): Raider|Construction: Radial|Rim: 16 in
265/70R16 is a metric radial size with a 265-millimeter section width, a 70-series aspect ratio, and a 16-inch rim diameter. BFGoodrich offers this size with an RWL sidewall and an S speed rating, which carries a 112 mph ceiling. This Raider-specific fitment is the one to consider when you want the larger-section 16-inch truck tire used on certain Raider configurations.
255/65R16 is a metric radial size with a 255-millimeter section width, a 65-series aspect ratio, and a 16-inch rim diameter. This size is specific to the Raider within 2006 Mitsubishi Trucks. It is the correct starting point only for Raider applications that use this exact 16-inch fitment, so wheel verification matters before moving on to product choice.
Year(s): 2006|Fit(s): Raider|Construction: Radial|Rim: 16 in
245/70R16 is a metric radial size with a 245-millimeter section width, a 70-series aspect ratio, and a 16-inch rim diameter. BFGoodrich offers this size with an RWL sidewall and an S speed rating, which carries a 112 mph ceiling. This Raider-specific fitment is best treated as its own application rather than as an interchangeable substitute for the Raider's other 16-inch sizes.
Four models are covered for 2006 Mitsubishi Trucks, and tire size varies meaningfully from one model to another. The Outlander and Raider each span multiple fitments, while the Endeavor uses one size and the Montero shares a single size with certain Raider applications. Select your model below to narrow the fitment history and product choices to the vehicle you actually own.
2006 Mitsubishi Trucks Endeavor
The Endeavor was Mitsubishi's midsize crossover entry, aimed at families who wanted SUV styling without moving into a full truck-based platform. Its tire fitment mounts on 17-inch wheels, which keeps the search straightforward compared with the multi-fitment Raider and Outlander.
The Montero remained Mitsubishi's traditional SUV, with a reputation tied to durability, off-road heritage, and long-distance utility. Its tire fitment mounts on 17-inch wheels and shares a size with certain Raider applications, so confirming the exact model still matters even when the size code matches another Mitsubishi truck.
The Outlander was Mitsubishi's compact crossover, positioned below the Endeavor and aimed at buyers who wanted a smaller footprint with everyday usefulness. It appears with both 16-inch and 17-inch tire fitments, so identifying the wheel diameter is the first step before comparing sidewall style or brand choices.
The Raider was Mitsubishi's midsize pickup, sharing its basic market mission with other work-and-recreation trucks of the period. It uses both 16-inch and 17-inch fitments depending on configuration, with several distinct 16-inch sizes, so the exact wheel and tire code should be matched carefully before choosing a replacement.
Eight products are available across seven tire sizes for 2006 Mitsubishi Trucks vehicles. The 225/60R16 has five radial choices from Goodyear and BFGoodrich in Raised Yellow Letter, redline, pin white stripe, and wide whitewall form; 215/55R17 has two BFGoodrich blackwall radials; 265/70R16 and 245/70R16 each have one BFGoodrich RWL radial. Confirm your exact size first, since speed ratings vary by size.
Goodyear Tires
Goodyear Eagle NASCAR Raised Yellow Letter | 225/60R16
These FAQs focus on the model-by-model size spread across 2006 Mitsubishi Trucks, how the metric radial codes differ, which sidewall styles appear in certain sizes, and what owners should check before fitting tires to a low-use SUV, crossover, or pickup.
Size Basics & Fitment
What tire sizes fit 2006 Mitsubishi Trucks vehicles?
2006 Mitsubishi Trucks vehicles use seven sizes across four models: 235/65R17 for the Endeavor, 265/65R17 for the Montero and some Raider applications, 225/60R16 and 215/55R17 for the Outlander, and 265/70R16, 255/65R16, or 245/70R16 for the Raider. Rim diameters are either 16 inches or 17 inches, depending on model and application. Rim width guidance appears on several supported products, including 6.0 to 7.0 inches and 6.00 to 9.00 inches for 225/60R16, 6.0 to 7.5 inches for 215/55R17, 7.0 to 8.5 inches for 265/70R16, and 6.5 to 7.0 inches for 245/70R16.
The practical takeaway is that year and make alone are not enough for 2006 Mitsubishi Trucks. Outlander and Raider fitments branch into multiple sizes, and the Montero shares a size with one Raider application, so the sidewall on the vehicle or the wheel diameter should be checked before anything else. Once the exact size is confirmed, you can compare available brands, sidewall appearance, and service characteristics within that fitment.
What does 235/65R17 mean on a 2006 Mitsubishi Trucks tire?
On a 2006 Mitsubishi Trucks tire, 235/65R17 is a modern metric radial code. The 235 is the nominal section width in millimeters, 65 is the aspect ratio, R identifies radial construction, and 17 is the wheel diameter in inches. Within the 2006 Mitsubishi Trucks range, this size belongs to the Endeavor.
That code matters because each part affects fitment, not just the overall look of the tire. A different aspect ratio or wheel diameter can change whether the tire seats correctly on the wheel and how it fills the wheel opening. For an Endeavor owner, the safest path is to match the tire code on the vehicle first and then compare available products within that exact size.
Do all 2006 Mitsubishi Trucks models use the same tire size?
No. 2006 Mitsubishi Trucks models do not share one universal tire size. The Endeavor uses 235/65R17, the Montero uses 265/65R17, the Outlander uses either 225/60R16 or 215/55R17, and the Raider appears with 265/70R16, 255/65R16, 245/70R16, or 265/65R17 depending on application. Only 265/65R17 carries across more than one model, covering the Montero and certain Raider fitments.
That means identification has to start with the model, and for Outlander or Raider owners, with the actual wheel and tire size already on the vehicle. It is easy to assume two Mitsubishi trucks from the same year use interchangeable tires, but the 16-inch and 17-inch spread makes that risky. Treat the size molded into the current tire as the primary reference point before narrowing by brand or appearance.
Buying the Right Tire
What sidewall styles are available for 2006 Mitsubishi Trucks tires?
Sidewall style depends heavily on size for 2006 Mitsubishi Trucks. The widest appearance range appears in 225/60R16 for the Outlander, where black-period custom styles such as Raised Yellow Letter, redline, pin white stripe, and wide whitewall are available. The 215/55R17 uses blackwall styling, while the truck-oriented 265/70R16 and 245/70R16 use RWL sidewalls.
Appearance choice can change the character of the vehicle even when the base fitment stays correct. A whitewall or redline leans toward a custom or retro-inspired presentation, while blackwall and RWL styles feel more at home on late-model SUVs and pickups. If visual authenticity matters, choose the sidewall treatment that best matches how your specific 2006 Mitsubishi Trucks model is being restored or presented.
What brands make tires for 2006 Mitsubishi Trucks vehicles?
BFGoodrich and Goodyear cover the supported sizes for 2006 Mitsubishi Trucks. The 225/60R16 is available from Goodyear and BFGoodrich, the 215/55R17 is available from BFGoodrich, and the 265/70R16 and 245/70R16 are also available from BFGoodrich. Brand coverage is therefore strongest in the Outlander's 225/60R16 fitment.
Brand choice matters most when more than one product exists in the same size. On 225/60R16, you can compare appearance-focused options more directly because both brand and sidewall style vary. On the truck sizes with a single all-terrain-style offering, the decision is less about brand comparison and more about confirming the exact size and intended use of the vehicle.
What is the difference between BFGoodrich Silvertown Radial and Goodyear Eagle NASCAR for the 2006 Mitsubishi Trucks Outlander?
For the 2006 Mitsubishi Trucks Outlander in 225/60R16, the BFGoodrich Silvertown Radial and Goodyear Eagle NASCAR differ most in sidewall presentation and wheel-width range. The Goodyear uses a Raised Yellow Letter sidewall, carries a 1609-pound load figure at 44 psi, weighs 24 pounds, and fits 6.0 to 7.0-inch rims. The BFGoodrich Silvertown Radial appears in redline, pin white stripe, and wide whitewall versions, weighs about 28 pounds, and fits a broader 6.00 to 9.00-inch rim-width range.
That makes the choice largely aesthetic unless your wheel width falls outside the Goodyear's narrower range. Owners building a custom look often gravitate toward the BFGoodrich sidewall options, while the Goodyear suits a bold raised-letter presentation. Either way, the wheel width should be verified first, because that fitment detail can settle the decision before style becomes the deciding factor.
Fitting & Setup
What rim width do 2006 Mitsubishi Trucks tires require?
Rim width requirements vary by size on 2006 Mitsubishi Trucks. For 225/60R16, available products fit rims from 6.0 to 7.0 inches or 6.00 to 9.00 inches depending on the tire. For 215/55R17, the supported range is 6.0 to 7.5 inches. For 265/70R16, the range is 7.0 to 8.5 inches, and for 245/70R16, it is 6.5 to 7.0 inches.
That spread shows why wheel width needs to be checked alongside tire size, especially if a vehicle has aftermarket wheels. Two tires with the same basic size can still have different approved wheel-width ranges. Measuring the wheel or confirming its stamped size before installation helps avoid selecting a tire that technically matches the diameter but is not ideal for the wheel itself.
Do 2006 Mitsubishi Trucks tires require inner tubes?
The supported 2006 Mitsubishi Trucks sizes shown here are modern radial fitments, and none carry a tube-type marking in the size information. That points toward tubeless construction for these applications, which is typical for 2006-era crossover, SUV, and pickup tires. Tube use would usually be driven by the wheel itself rather than by these tire sizes.
The important check is wheel condition. If the vehicle still uses original wheels, inspect the bead seats, valve stem holes, and overall sealing surfaces before mounting new tires. A sound tubeless wheel and fresh valve stems are usually the key setup items here, while a damaged or specialty wheel may call for additional guidance from a wheel or tire specialist.
Can the original 2006 Mitsubishi Trucks wheels be used with all tire sizes?
No single original wheel covers every tire size used across 2006 Mitsubishi Trucks. The lineup splits between 16-inch and 17-inch rim diameters, so a 16-inch Outlander or Raider fitment cannot mount on a 17-inch Endeavor or Montero wheel, and the reverse is also true. Even within the same diameter, approved rim-width ranges differ by size.
Original wheels can usually continue in service when the replacement tire matches both the diameter and the wheel-width requirements of that exact fitment. That is especially important on Raider and Outlander applications, where more than one factory-style size appears in the same model year. Before reusing an original wheel, confirm the wheel size and compare it directly against the tire's approved rim-width range.
Maintenance, Storage & Longevity
How should I store a 2006 Mitsubishi Trucks when the tires are fitted?
A stored 2006 Mitsubishi Trucks should be kept out of direct sunlight, away from ozone-producing equipment such as motors or battery chargers, and clear of standing moisture on garage floors. Clean tires and proper inflation help preserve the casing during long periods of inactivity. Radial tires generally resist flat-spotting better than older bias-ply designs, but they still age faster when exposed to heat and UV.
If the vehicle sits for long stretches, move it periodically to change the contact patch or place it on stands if the storage period will be extended and the suspension setup allows it safely. A breathable cover and a stable indoor environment are better for the tire than repeated temperature swings. Storage habits matter as much as tread depth on collector and low-mileage vehicles.
How long do tires on a 2006 Mitsubishi Trucks typically last?
For a 2006 Mitsubishi Trucks vehicle that sees collector-style or low annual use, tire age is usually more important than mileage. A good rule is to begin closer evaluation around five to seven years of service and to treat about ten years from the DOT date code as the point where replacement deserves serious consideration, even if the tread still looks serviceable.
A tire can appear healthy yet still harden with age, lose wet-weather flexibility, or develop internal deterioration that is not obvious at a glance. Owners who drive only occasionally often overlook this because the tread wears so slowly. Checking the manufacturing date on every tire, including the spare, keeps age from becoming the hidden weak point in an otherwise well-kept 2006 Mitsubishi Trucks vehicle.
How often should tires on a 2006 Mitsubishi Trucks be inspected?
Tires on a 2006 Mitsubishi Trucks should be inspected before every drive, with a more deliberate check before any longer outing or highway trip. Look for sidewall cracking, cuts, uneven wear, bulges, punctures, and pressure loss. Valve stems also deserve attention, especially on older wheels where age and heat can harden the rubber.
Frequent inspection matters because many 2006 Mitsubishi Trucks vehicles now live a mixed life of short local drives and long periods of storage. Problems can develop while parked just as easily as they can on the road. A quick walk-around before driving often catches a soft tire, weathered stem, or sidewall issue early enough to prevent a roadside problem.
Restoration & Authenticity
What tires were originally fitted to the 2006 Mitsubishi Trucks Endeavor?
A 2006 Mitsubishi Trucks Endeavor was originally part of the modern radial era, so radial construction is the authentic baseline for original-type replacement. Within this year-and-make grouping, the Endeavor uses 235/65R17, mounted on a 17-inch wheel. That makes the key authenticity point less about choosing bias-ply versus radial and more about matching the correct modern metric size and overall appearance for the vehicle.
Owners restoring an Endeavor to factory-style presentation should start by confirming the tire placard, owner's manual, and the wheel currently on the vehicle. Dealer-installed accessories and wheel-package changes could affect what looks right on a specific truck. If show-level accuracy matters, a Mitsubishi club or model specialist can help verify market-specific details beyond the size itself.
Does correct tire fitment matter for showing a 2006 Mitsubishi Trucks?
Yes, correct tire fitment matters when showing a 2006 Mitsubishi Trucks, even though these vehicles are newer than traditional full-classic applications. Judges and knowledgeable enthusiasts notice whether the tire size suits the model, whether the wheel diameter is appropriate, and whether the sidewall treatment looks period-appropriate for the way the vehicle is being presented. An Outlander on a wide whitewall may create a custom look, but it will read differently from a factory-style blackwall presentation.
For show use, the goal is consistency between the vehicle's theme and the tire you choose. A stock-appearing Montero, Endeavor, or Raider usually benefits from a more restrained sidewall, while a custom build may intentionally lean into redlines, raised letters, or whitewalls where available. Event rules vary, so owners pursuing judged authenticity should check with the specific club or show before finalizing the tire style.
What is the difference between BFGoodrich g-Force Comp-2 A/S and BFGoodrich g-Force Phenom T/A for the 2006 Mitsubishi Trucks Outlander?
For a 2006 Mitsubishi Trucks Outlander using 215/55R17, both BFGoodrich g-Force options are blackwall radial tires in the same basic size, and both carry a W speed rating with a 168 mph ceiling. The Phenom T/A shown here carries a 1653-pound load figure at 50 psi and weighs 26.12 pounds, while the Comp-2 A/S weighs 26 pounds. Both fit 17-inch wheels with a 6.0 to 7.5-inch approved rim-width range.
In practical terms, this comparison is about small spec differences within the same fitment rather than a major change in size or wheel compatibility. Since both share the same visual treatment and speed category, the finer details of load figure, intended driving character, and owner preference become the deciding points. An Outlander owner should match the tire to the vehicle's use pattern while staying within the original size.
Safety & Road Use
Are 2006 Mitsubishi Trucks tires safe for highway driving?
Yes, 2006 Mitsubishi Trucks tires can be suitable for highway driving when the correct size is chosen, the tire is in sound condition, and the speed rating matches intended use. Among the supported products here, 215/55R17 carries a W rating with a 168 mph ceiling, while 245/70R16 and 265/70R16 carry an S rating with a 112 mph ceiling. Those tire limits are well above normal U.S. highway speeds when the vehicle is properly maintained.
The larger safety picture includes the vehicle itself. Brakes, suspension condition, alignment, and age-related wear often matter more on a 2006 SUV or pickup than the raw tire speed ceiling. Before regular highway use, make sure the tires are correctly inflated, evenly worn, and free from age cracking, then consider the overall mechanical condition of the Mitsubishi as part of the same safety equation.
What inflation pressure should I use for 2006 Mitsubishi Trucks tires?
Inflation pressure on 2006 Mitsubishi Trucks depends on the exact tire size and the specific tire selected. Available load-and-pressure figures include 1609 pounds at 44 psi or 1609 pounds at 34 psi for some 225/60R16 products, 1653 pounds at 50 psi for one 215/55R17 product, 2535 pounds at 65 psi for 245/70R16, and 3195 pounds at 80 psi for 265/70R16. Those figures are tire capacity ratings, not blanket vehicle settings.
Use the vehicle placard or owner's manual as the starting point for the Mitsubishi's recommended service pressure, then confirm the tire manufacturer's guidance for the exact product being fitted. A load-capacity pressure printed for one tire should not be transferred casually to another size or another model. Matching pressure to both the vehicle and the tire is especially important when the same year and make spans crossover, SUV, and pickup applications.
What should I check before taking a 2006 Mitsubishi Trucks on a longer drive?
Before a longer drive in a 2006 Mitsubishi Trucks vehicle, inspect every tire for cracking, cuts, punctures, bulges, irregular wear, and correct cold inflation pressure. Check valve stems, verify tread depth across the full width, and make sure the spare is usable and inflated. On vehicles that sit often, a quick look is not enough; age and storage conditions can create issues that only show up under a closer inspection.
A longer trip is also the time to think beyond the tires. Wheel fastener torque, alignment behavior, shocks, brakes, and steering condition all influence how safely the tire can do its job. Tires are the final link to the road, but they cannot compensate for neglected chassis or brake components. Treat the pre-drive inspection as a full-vehicle readiness check, with the tires as the first item on the list.
