The 2006 Mitsubishi Trucks Raider came to market as a midsize pickup aimed at buyers who wanted practical truck capability with available cab, driveline, and trim variations. That matters on the tire side, because this Raider does not use one universal fitment across the range. Depending on sub-model, it uses 245/70R16, 255/65R16, 265/70R16, or 265/65R17 radial tires, with both 16-inch and 17-inch rim diameters in the mix. Available selections shown here center on BFGoodrich All-Terrain T/A KO2 fitments in certain sizes with raised white letter sidewalls. The key is matching the tire to the exact Raider configuration and wheel setup before comparing appearance, load capacity, and use case.
Which Tire Size Is Right for The 2006 Mitsubishi Trucks Raider
Four tire sizes apply to the 2006 Mitsubishi Trucks Raider, and they vary by sub-model and wheel diameter. Some versions use 16-inch rims, while the XLS uses a 17-inch rim, so the first step is confirming the exact sub-model and the actual wheel diameter on the truck before choosing a tire. Once that is settled, the decision becomes selecting the right radial size and comparing the available product characteristics for that fitment.
In 265/70R16, the 265 identifies nominal section width in millimeters, 70 is the aspect ratio, R marks radial construction, and 16 is the wheel diameter in inches. This is a modern metric radial fitment used on several Raider configurations, making it one of the most important sizes to verify when sorting through trim and driveline differences. Available choices shown here include a BFGoodrich All-Terrain T/A KO2 with raised white letter sidewalls. It is the right size to evaluate for Raiders already equipped with the proper 16-inch wheel and the sub-models that call for this broader tire footprint.
The 255/65R16 size uses a 255-millimeter nominal section width, a 65-series aspect ratio, radial construction, and a 16-inch rim diameter. On the 2006 Mitsubishi Trucks Raider, this size belongs to a specific LS configuration rather than the whole model range, so it should be matched carefully to the truck’s exact sub-model. Its lower-profile format sets it apart from the 70-series 16-inch options used elsewhere in the lineup. This is the size to focus on when the truck retains its original 16-inch wheel diameter and the LS setup that uses this fitment.
A 245/70R16 tire is 245 millimeters wide in nominal section width, uses a 70-series profile, carries radial construction, and mounts on a 16-inch rim. Within the Raider lineup, this size is tied to a specific LS configuration, so it should not be treated as a universal 16-inch fitment for every truck. The available product shown in this size is a BFGoodrich All-Terrain T/A KO2 with a raised white letter sidewall. It is the size to compare when the truck uses the narrower 16-inch setup and the wheel width falls within the tire’s approved range.
The 265/65R17 size combines a 265-millimeter nominal section width with a 65-series profile, radial construction, and a 17-inch wheel diameter. On the 2006 Mitsubishi Trucks Raider, this fitment separates itself immediately by rim size, since the rest of the covered sizes use 16-inch wheels. That makes wheel confirmation especially important before moving from a 16-inch sub-model to an XLS or vice versa. This is the size to evaluate when the truck has the correct 17-inch wheel package and needs a tire matched to that specific Raider configuration.
Tire fitment varies across the 2006 Mitsubishi Trucks Raider lineup, so identifying the exact sub-model is the first step before selecting a tire. The covered configurations split across four sizes and two wheel diameters, which makes trim, cab style, and driveline important to confirm.
The 2006 Mitsubishi Trucks Raider DuroCross 4x2 Double Cab uses the 265/70R16 radial size. Tire selection here is mainly about staying with the correct 16-inch fitment and choosing a tread and sidewall style that suits how the truck is used.
The 2006 Mitsubishi Trucks Raider DuroCross 4x2 Ext. Cab also uses the 265/70R16 radial size. That keeps fitment straightforward, but the truck should still be checked for the proper wheel diameter and any later wheel changes before a replacement is chosen.
The 2006 Mitsubishi Trucks Raider DuroCross 4x4 Double Cab uses a 265/70R16 radial tire. The main selection point is confirming the existing 16-inch wheel setup and then comparing available tire characteristics for on-road use, off-road use, and overall appearance.
The 2006 Mitsubishi Trucks Raider DuroCross 4x4 Ext. Cab is fitted with 265/70R16 radial tires. Buyers looking at this version should keep the focus on correct 16-inch wheel compatibility and verify that any modified suspension or aftermarket wheels have not changed clearance requirements.
The 2006 Mitsubishi Trucks Raider LS 4x2 Double Cab uses the 255/65R16 radial size rather than the taller 70-series fitments seen elsewhere in the lineup. Choosing a tire for this truck starts with retaining that exact size unless the wheel and overall setup are being evaluated carefully.
The 2006 Mitsubishi Trucks Raider LS 4x2 Ext. Cab uses a 245/70R16 radial tire. That makes it important to match the truck to the narrower 16-inch fitment and compare available tire options with attention to wheel-width compatibility and intended use.
The 2006 Mitsubishi Trucks Raider LS 4x4 Double Cab uses the 265/70R16 radial size. Tire choice is more about selecting the right product within that size than sorting through multiple primary fitments, provided the truck still carries the correct 16-inch wheels.
The 2006 Mitsubishi Trucks Raider XLS uses 265/65R17 radial tires, making it the only covered sub-model here on a 17-inch wheel. That difference should be confirmed first, because a 16-inch Raider fitment and a 17-inch XLS fitment are not interchangeable choices.
The tire sizes listed on this page assume factory-standard vehicle configuration. The following modifications may affect tire fitment and are not reflected in this guide:
Suspension changes (lowering, lift kits, spring replacements)
Body alterations (fender modifications, custom bodywork)
If your vehicle has been modified from factory specifications, verify tire clearance before purchase.
Best 2006 Mitsubishi Trucks Raider Tires for Sale
Available product choices shown for the 2006 Mitsubishi Trucks Raider focus on BFGoodrich All-Terrain T/A KO2 tires in select 16-inch sizes. Those options share radial construction and raised white letter sidewalls, while differing in size, rim-width compatibility, load capacity, and overall tire weight.
Owners of a 2006 Mitsubishi Trucks Raider usually need to confirm the exact tire size by sub-model first, then sort through wheel diameter, radial fitment, available tire choices, and basic inspection points before the truck goes back on the road.
Tire Size & Fitment
What tire size fits a 2006 Mitsubishi Trucks Raider?
The 2006 Mitsubishi Trucks Raider uses four different tire sizes depending on sub-model: 245/70R16, 255/65R16, 265/70R16, and 265/65R17. All of these are radial tire sizes, and the truck uses either a 16-inch or 17-inch rim depending on configuration.
The practical step is to identify the exact Raider trim, cab style, and driveline before choosing a tire. It also helps to confirm the actual wheel diameter on the truck, especially if a previous owner changed wheels or tires, because the Raider range does not share one universal fitment.
What size rim does a 2006 Mitsubishi Trucks Raider use?
A 2006 Mitsubishi Trucks Raider uses either a 16-inch or 17-inch rim, depending on the sub-model and tire size. The 245/70R16, 255/65R16, and 265/70R16 fitments use 16-inch rims, while the 265/65R17 fitment uses a 17-inch rim.
Rim diameter needs to match the tire size exactly, so this should be verified before anything else. Wheel width matters too when comparing actual tire options, particularly on truck tires with approved rim-width ranges, and that becomes even more important if the Raider has aftermarket wheels.
Why does the 2006 Mitsubishi Trucks Raider have more than one tire size?
The 2006 Mitsubishi Trucks Raider has more than one tire size because the lineup includes different trims, cab styles, driveline layouts, and wheel packages. DuroCross, LS, and XLS versions do not all use the same tire, and one Raider configuration uses a 17-inch wheel while the others listed here use 16-inch wheels.
That means tire selection starts with vehicle identification rather than brand preference or tread style. Once the exact sub-model and wheel diameter are confirmed, the correct tire size becomes much easier to narrow down and compare against the truck’s current wheels, clearance, and intended driving use.
Choosing the Right Tire
What should I consider when choosing a tire for a 2006 Mitsubishi Trucks Raider?
Start with the exact tire size and wheel diameter used by the specific 2006 Mitsubishi Trucks Raider sub-model. This truck can require 245/70R16, 255/65R16, 265/70R16, or 265/65R17, so choosing the correct fitment comes before comparing tread style, sidewall treatment, load capacity, or tire weight.
After size is confirmed, compare the tire’s intended use against how the truck is actually driven. A Raider used for routine street driving may call for different priorities than one that sees dirt roads, cargo, or mixed use, and wheel-width compatibility should be checked before settling on a replacement.
What sidewall styles are available for 2006 Mitsubishi Trucks Raider tires?
The available Raider products shown here use an RWL sidewall, which means raised white letters. That styling pairs with the BFGoodrich All-Terrain T/A KO2 options available in the covered 16-inch sizes and gives the truck a more traditional light-truck appearance than a plain blackwall presentation.
Sidewall style does not change the need to match the correct size, wheel diameter, and approved wheel width. Once those basics are in order, sidewall treatment becomes an appearance decision that can shape whether the truck looks more understated, more off-road oriented, or more period-inspired.
What brands offer tires for the 2006 Mitsubishi Trucks Raider?
The available products shown for the 2006 Mitsubishi Trucks Raider come from BFGoodrich. In the covered fitments, that brand appears through the All-Terrain T/A KO2 line for select 16-inch Raider tire sizes.
Brand choice is only one part of the decision, especially on a truck with multiple size and wheel combinations across the model range. It still makes sense to verify the exact sub-model, compare load capacity and wheel-width requirements, and decide whether the truck needs an all-terrain style tire for how it is actually used.
Restoration & Appearance
Which tire should I choose for a period-style 2006 Mitsubishi Trucks Raider?
For a period-style 2006 Mitsubishi Trucks Raider, the first priority is using the exact size that belongs on the truck’s sub-model and wheel diameter. Since the Raider is a modern-era pickup with all-radial fitments, staying with the correct radial size preserves the truck’s intended overall stance more faithfully than forcing a different size.
Appearance choices then come from the tire’s sidewall and tread character rather than from switching to a different construction type. An all-terrain tire with raised white letters can give the truck a more era-appropriate sport-truck or off-road look, but the final decision should still respect wheel compatibility and intended use.
How does tire construction affect the appearance of a restored 2006 Mitsubishi Trucks Raider?
On the 2006 Mitsubishi Trucks Raider, construction is straightforward because the primary fitments are radial tires. That means the appearance question is less about bias-ply versus radial styling and more about choosing the correct modern radial size, tread character, and sidewall treatment for the truck’s specific trim and wheel package.
A truck restored with the proper size will usually look more coherent than one wearing an incorrect profile or wheel diameter. Owners concerned with exact visual authenticity should compare the finished setup against original vehicle photos, factory literature, or marque-specific references before making a final appearance-focused tire decision.
Fitment, Maintenance & Road Use
Can modifications affect tire fitment on a 2006 Mitsubishi Trucks Raider?
Yes, modifications can affect tire fitment on a 2006 Mitsubishi Trucks Raider even when the tire size looks close to stock. Aftermarket wheels, different wheel widths, altered offsets, lift or lowering changes, and suspension wear can all change how a tire sits in the wheel opening and how much clearance remains at full steering lock.
That matters even more on a Raider lineup that already uses both 16-inch and 17-inch fitments. A truck with changed wheels or suspension should be checked for rim diameter, wheel width, and clearance at the fender and suspension before a replacement tire is chosen or before moving between different listed sizes.
What should I inspect before driving a 2006 Mitsubishi Trucks Raider on new tires?
Before driving a 2006 Mitsubishi Trucks Raider on new tires, inspect the wheel size, wheel condition, valve stems, lug torque, and inflation pressure. It also makes sense to look over the alignment, suspension wear items, and brake components, since uneven geometry or worn parts can shorten tire life quickly on a midsize truck.
A careful visual check should continue after installation and through the first few drives. Watch for rubbing during turns, unusual vibration, air loss, or uneven contact patterns, because those early signs can point to a wheel-width issue, an alignment problem, or a mismatch between the tire and the truck’s current setup.
How often should tires on a 2006 Mitsubishi Trucks Raider be inspected?
Tires on a 2006 Mitsubishi Trucks Raider should be inspected regularly, with quick visual checks before normal driving and closer inspections at routine service intervals. Look for cuts, sidewall cracking, punctures, bulges, irregular tread wear, and any signs of air loss, especially if the truck sits for long periods between uses.
Truck tires also deserve extra attention after towing, rough-road use, or any suspension work. Consistent pressure checks and periodic rotation help maintain even wear, while a closer inspection of clearance and alignment is worthwhile if the Raider develops steering pull, vibration, or visible wear on one edge of the tread.
