2023 Mitsubishi Trucks Tire Fitment Guide

2023 Mitsubishi Trucks vehicles use four sizes across the model range: 215/70R16 for the Eclipse Cross, 225/55R18 for the Eclipse Cross and Outlander Sport, 235/60R18 for the Outlander and Outlander PHEV, and 255/45R20 for the Outlander and Outlander PHEV. Rim diameters are 16, 18, and 20 inches, and confirmed rim-width ranges appear on available products for 215/70R16 at 5.5 to 7.5 inches and for 255/45R20 at 8.0 to 9.5 inches.

The main takeaway is that 2023 Mitsubishi Trucks fitment is model-specific and often wheel-package-specific as well. If you are replacing tires on an Eclipse Cross or Outlander-family vehicle, check the sidewall on the current tire and verify the actual wheel diameter before choosing a replacement size, especially where one model can appear with more than one factory size path.

On a 2023 Mitsubishi Trucks tire, 215/70R16 means the tire is 215 millimeters wide, has a 70-series aspect ratio, uses radial construction, and mounts on a 16-inch wheel. Within this model year, that size applies to the Eclipse Cross. Available examples include RWL and wide whitewall versions, so the same basic dimensions can still deliver very different visual results.

That code matters because each part affects fitment. The 16-inch wheel diameter has to match exactly, while the width and profile shape the tire’s overall proportions. If your Eclipse Cross wears 16-inch wheels, 215/70R16 is the size family to research further; if it wears 18-inch wheels instead, you need to move to the correct alternate size rather than trying to interchange across wheel diameters.

No, 2023 Mitsubishi Trucks models do not all use the same tire size. The Eclipse Cross uses either 215/70R16 or 225/55R18, the Outlander Sport uses 225/55R18, and the Outlander and Outlander PHEV use either 235/60R18 or 255/45R20. Every size in this year is a radial, but fitment still changes by both model and wheel diameter.

That means year and make alone are not enough to choose tires for 2023 Mitsubishi Trucks vehicles. The safest approach is to identify the exact model first, then confirm the wheel diameter already on the vehicle. That is especially important for the Outlander family, where 18-inch and 20-inch fitments coexist and cannot be treated as interchangeable replacements.

Sidewall style depends on size. For 2023 Mitsubishi Trucks vehicles, 215/70R16 is available in RWL and wide whitewall form, while 255/45R20 appears in blackwall and RWL form. That creates a wider appearance range than many modern crossover fitments usually offer, especially for owners who want something more distinctive than a plain blackwall tire.

The right choice depends on the look you want and the model you own. A blackwall or RWL tire usually aligns more naturally with contemporary crossover styling, while a wide whitewall creates a custom or nostalgia-driven appearance that stands apart from original late-model presentation. Confirm the correct size first, then choose the sidewall treatment that matches the vehicle’s intended visual direction.

2023 Mitsubishi Trucks coverage here comes from BFGoodrich, Coker Classic, American Classic, Nitto, and Pro-Trac. In 215/70R16, the available brands are BFGoodrich, Coker Classic, and American Classic. In 255/45R20, the available brands are BFGoodrich, Nitto, and Pro-Trac. All of those products are radials, but they differ in appearance and intended character within the same basic size.

Brand choice matters most after fitment has been narrowed to the correct size and wheel diameter. Some owners will focus on a traditional-looking sidewall, while others will want a more modern performance-oriented presentation. Once the size is confirmed, compare each brand’s sidewall style, speed rating where shown, and rim-width compatibility before deciding which tire best matches the vehicle’s use.

In 255/45R20 for 2023 Mitsubishi Trucks vehicles, BFGoodrich and Nitto both offer radial products with W speed ratings, which carry a 168 mph ceiling. BFGoodrich options include blackwall products with an 8.0 to 9.5-inch rim-width range and a recorded weight around 32 pounds, while the Nitto option is also a blackwall radial and weighs about 31.97 pounds. One BFGoodrich entry also shows a maximum load figure of 1,819 pounds at 51 psi.

The practical difference is less about broad fitment and more about the specific tire series and the details that matter to your vehicle. If your Outlander or Outlander PHEV uses 20-inch wheels, compare the exact sidewall appearance you want, whether the product includes a stated rim-width range, and whether the speed and load markings align with your expectations before settling on one tire over another.

Confirmed rim-width guidance for 2023 Mitsubishi Trucks tires varies by size. In 215/70R16, available products show ranges of 5.5 to 7.0 inches and 5.50 to 7.50 inches. In 255/45R20, available products show an 8.0 to 9.5-inch range. Those numbers are size-specific and should stay tied to the exact tire you are considering.

Rim width matters because two tires with the same rim diameter can still be intended for different wheel widths. Before mounting a replacement, verify the actual wheel width on the vehicle and compare it with the approved range for the tire you want. That is especially important if the vehicle has aftermarket wheels or if you are moving between different series within the same basic size.

Original 2023 Mitsubishi Trucks wheels cannot automatically be used with all tire sizes across the lineup because the range spans 16-inch, 18-inch, and 20-inch wheel diameters. A 215/70R16 requires a 16-inch wheel, both 225/55R18 and 235/60R18 require an 18-inch wheel, and 255/45R20 requires a 20-inch wheel. Wheel diameter must match the tire exactly.

The point to remember is that some size overlap exists only within the same wheel diameter, not across the whole year and make. If you are replacing tires on a vehicle that already has factory wheels, confirm the wheel diameter first. If the vehicle has changed hands or may have aftermarket wheels, inspect the wheel and sidewall directly rather than assuming a given model always carries one size.

A 2023 Mitsubishi Trucks vehicle should be stored clean, dry, and out of direct sunlight, with the tires kept away from ozone-producing sources such as electric motors, battery chargers, and some shop equipment. These are all radial tires, which generally resist storage flat-spotting better than older bias-ply designs, but long stationary periods can still affect pressure retention and surface condition.

For a vehicle that sits often, inflate the tires properly before storage, move it periodically if possible, and avoid leaving one contact patch loaded in the same position for months at a time. If the vehicle will be parked for an extended period, occasional rolling or the use of stands can help reduce stress on the tires while also supporting broader collector-vehicle storage practices.

Tires on a 2023 Mitsubishi Trucks vehicle should be judged by age and condition at least as much as by miles traveled. A useful rule is to begin evaluating more closely once tires are around five to seven years old and to treat about ten years as a serious replacement checkpoint, even if tread depth still looks acceptable. The DOT date code on the sidewall tells you when the tire was made.

That approach is especially important for low-mileage vehicles that may look fine at a glance but spend long periods parked. Rubber ages through heat cycles, time, and storage conditions, not just road use. When age starts to build, inspect for cracking, hardening, irregular wear, or vibration, and do not assume a tire is healthy simply because the tread appears deep.

Tires on a 2023 Mitsubishi Trucks vehicle should be checked before every drive and given a more thorough inspection before longer trips or highway travel. Look for pressure loss, cuts, bulges, sidewall cracking, irregular wear, and anything embedded in the tread. On modern radial crossover tires, uneven shoulder wear or repeated pressure changes can also point to alignment or valve-stem issues that deserve attention.

Routine inspection is inexpensive insurance, especially on vehicles that alternate between daily use and long periods of sitting. A quick visual and pressure check before driving can catch problems before they become roadside failures. Before a longer outing, also inspect the spare, verify the inflation pressure when the tires are cold, and make sure the tread condition is consistent across all four corners.

A 2023 Mitsubishi Trucks Eclipse Cross would have been fitted from the factory with modern radial tires, not older bias-ply construction. Within this year and make, the Eclipse Cross uses either 215/70R16 or 225/55R18 depending on wheel package. That puts originality questions on a modern vehicle more in the realm of matching the correct size, wheel diameter, and general appearance than recreating an earlier-period construction style.

If authenticity matters, start by matching the size currently associated with your exact wheel package and confirm against the original door-jamb or owner’s literature for the vehicle. Because late-model crossover fitment can vary by trim and wheel package, exact factory appearance is usually tied to the correct size and sidewall presentation rather than to reproduction-era styling details familiar from older collector vehicles.

Correct tire fitment does matter if a 2023 Mitsubishi Trucks vehicle is being prepared for display, judging, or a particularly original presentation. On a modern vehicle, the key concerns are the right size for the model and wheel package, an appropriate sidewall appearance, and avoiding an obviously mismatched diameter or profile. A whitewall or raised white letter tire can change the vehicle’s visual character substantially even when the size itself is correct.

That means show-minded owners should think beyond simple fit. If the goal is factory-correct presentation, confirm the original size and choose a sidewall style that suits the vehicle’s original market appearance. If the goal is a personalized look, the correct fitment still matters, but a distinctive sidewall treatment may be part of the intended style rather than a judging concern.

In 215/70R16 for 2023 Mitsubishi Trucks vehicles, BFGoodrich and American Classic take different visual approaches while staying within the same basic radial size. The BFGoodrich option uses an RWL sidewall, carries a 100/97R marking, supports a 5.5 to 7.0-inch rim-width range, and has a recorded load figure of 1,765 pounds at 50 psi. The American Classic option uses a wide whitewall sidewall, supports a 5.50 to 7.50-inch rim-width range, and carries a recorded load figure of 1,709 pounds at 35 psi.

That makes the choice as much about appearance as specification detail. If your Eclipse Cross runs 16-inch wheels and you want a more conventional raised-white-letter look, the BFGoodrich path stands apart visually from the broader whitewall treatment of the American Classic. Compare the wheel width on the vehicle and the sidewall style you want before selecting between them.

2023 Mitsubishi Trucks tires can be suitable for highway driving when the correct size is used, the tires are in sound condition, and the speed rating matches the intended use. The 255/45R20 options shown here include W-rated tires, which carry a 168 mph ceiling, and the 215/70R16 BFGoodrich example carries an R speed symbol. In normal highway use, the vehicle’s condition, alignment, braking system, and tire age are at least as important as the speed symbol itself.

Safe highway operation depends on proper inflation, sound tread and sidewalls, and choosing a tire that actually matches the wheel diameter and load needs of the vehicle. A modern crossover with old, underinflated, or damaged tires is a bigger concern than one with a generous speed rating. Before regular highway use, inspect all four tires carefully and replace anything that shows age-related deterioration or impact damage.

Inflation pressure for 2023 Mitsubishi Trucks tires should follow the vehicle manufacturer’s recommendation for the exact model and wheel package first, then be checked against the tire manufacturer’s own markings and load-pressure information where applicable. Examples here include 215/70R16 products carrying 2,094 pounds at 32 psi, 1,709 pounds at 35 psi, and 1,765 pounds at 50 psi, plus a 255/45R20 product carrying 1,819 pounds at 51 psi. Those figures are tire ratings, not universal vehicle settings.

The important point is not to transfer one pressure figure from one tire or one size to another. A crossover on 16-inch tires and the same brand’s 20-inch tire can have very different design targets. Use the placard or owner’s manual as your primary guide for day-to-day pressure, then confirm that the tire itself is being used within its own rated limits.

Before a longer drive in a 2023 Mitsubishi Trucks vehicle, inspect each tire for cracking, cuts, punctures, bulges, and irregular wear, and confirm cold inflation pressure on all four corners plus the spare. Make sure the tread depth is even across the axle, and look closely at the sidewalls for any impact damage from curbs or potholes. If the vehicle has been parked for an extended period, pay extra attention to vibration or pressure loss during the first miles.

A longer trip is also the right time for a broader age-appropriate mechanical check. Tires are only one part of the equation on a vehicle that may have seen mixed use patterns or recent storage. Along with tire condition, confirm that the brakes feel normal, the steering tracks straight, and no warning signs such as shaking, pulling, or repeated pressure loss appear once the drive begins.