2019 Mitsubishi Trucks Tire Fitment Guide

2019 Mitsubishi Trucks vehicles use two tire sizes across four models: 215/70R16 and 225/55R18. The 215/70R16 size applies to the Eclipse Cross, while 225/55R18 fits the Eclipse Cross, Outlander, Outlander PHEV, and Outlander Sport. The 16-inch size mounts on rims from 5.5 to 7.5 inches wide across the available products, depending on the specific tire.

That means year and make alone are not enough for a final tire choice on 2019 Mitsubishi Trucks. Eclipse Cross owners need to confirm whether the vehicle has the 16-inch or 18-inch wheel package, while owners of the other three models can begin with 225/55R18 as the model-correct size. Checking the sidewall on the vehicle now is the fastest way to avoid ordering for the wrong wheel diameter.

On a 2019 Mitsubishi Trucks tire, 215/70R16 is a modern metric radial size. The 215 is the nominal section width in millimeters, 70 is the aspect ratio, the R indicates radial construction, and 16 is the wheel diameter in inches. In this application, that size is used on certain Eclipse Cross fitments rather than across the full Mitsubishi lineup.

Reading that code correctly matters because it tells you both the wheel diameter and the tire's basic profile. A 215/70R16 cannot be substituted onto an 18-inch wheel, even though both sizes in this year and make are radial. Once the code matches the wheel, you can compare the available versions by sidewall style, load rating, and whether you want a more utility-focused tread or a more styling-oriented appearance.

No, not all 2019 Mitsubishi Trucks models use the same tire size. The Eclipse Cross appears with both 215/70R16 and 225/55R18 fitments, while the Outlander, Outlander PHEV, and Outlander Sport use 225/55R18 in this range. The split is tied to model and wheel package rather than a universal year-wide size.

That difference has a practical effect when you are comparing products across the lineup. If you own an Outlander-based model, the 18-inch fitment is the clear starting point. If you own an Eclipse Cross, verify the existing sidewall marking or wheel diameter before comparing brands, since choosing between 16-inch and 18-inch products is a fitment issue first and a style decision second.

2019 Mitsubishi Trucks tires in 215/70R16 are available with more than one sidewall presentation. BFGoodrich offers that size in RWL form, while Coker Classic and American Classic offer wide whitewall versions. Those are very different visual directions even though they share the same basic size code and wheel diameter.

For most 2019 Mitsubishi Trucks owners, sidewall style is less about factory-style authenticity and more about the look you want the vehicle to carry. An RWL sidewall leans toward a more rugged, utility-oriented appearance, while a wide whitewall creates a more stylized custom presentation. Confirm the exact size first, then choose the sidewall treatment that suits the vehicle's finish and intended personality.

BFGoodrich, Coker Classic, and American Classic all offer tires for 2019 Mitsubishi Trucks in the 215/70R16 fitment. BFGoodrich covers that size with an All-Terrain T/A KO2 specification, while Coker Classic and American Classic offer whitewall radial alternatives in the same basic size. Those choices give Eclipse Cross owners several distinct appearance and use-profile directions within one fitment.

Brand choice should follow size confirmation, not replace it. A buyer with an Outlander, Outlander PHEV, or Outlander Sport should first confirm the 225/55R18 fitment, then move into the model-specific or size-specific product view for the applicable tire selection. For Eclipse Cross owners, the decision is narrower: verify the wheel diameter, then compare the brand's tread character and sidewall style.

For 2019 Mitsubishi Trucks in 215/70R16, the BFGoodrich option is an LT215/70R16/C All-Terrain T/A KO2 with an RWL sidewall, a 1,765-pound load capacity at 50 psi, a 5.5-to-7.0-inch rim width range, and a 100/97R speed-and-load marking. The Coker Classic Star Series uses the same basic 215/70R16 size but carries a 2.00-inch whitewall, a 2,094-pound load capacity at 32 psi, and a more styling-focused presentation.

That comparison is less about one being universally better and more about matching the tire to the role of the vehicle. The BFGoodrich leans toward a utility-oriented look and specification, while the Coker Classic is aimed at owners who want a cleaner, more custom visual treatment. Check your wheel width and intended use before choosing between them, because both fit the same diameter but present the vehicle very differently.

Rim width guidance is available for 2019 Mitsubishi Trucks in the 215/70R16 size. BFGoodrich pairs that size with a 5.5-to-7.0-inch rim width range, while American Classic uses a 5.50-to-7.50-inch range for its 215/70R16 version. All of those tires mount on a 16-inch wheel diameter, but the acceptable wheel width can vary slightly by tire design.

That is why wheel width should be checked against the exact product, not just the size code alone. A tire may fit the wheel diameter correctly but still fall outside the manufacturer's preferred width range if the wheel is unusually narrow or wide. Matching the exact wheel to the exact tire helps preserve the intended section shape, load behavior, and steering response.

The available 2019 Mitsubishi Trucks 215/70R16 products are modern radial tires and do not carry tube-type markings in their size descriptions. That points buyers toward tubeless-style fitments in this application rather than vintage tube-required construction. The two sizes used across this year and make are contemporary metric radials, not antique or numeric tube-type formats.

Even so, the wheel itself still matters. If a wheel has been replaced, repaired, or custom-finished, inspect its condition and sealing surface before mounting any new tire. On a normal modern crossover wheel, the more important setup checks are valve stem condition, wheel integrity, and making sure the tire size on the sidewall matches the wheel diameter already on the vehicle.

A 2019 Mitsubishi Trucks vehicle should be stored away from direct sunlight, standing moisture, and electric motors or equipment that generate ozone, since all of those conditions accelerate rubber aging. Keep the tires properly inflated during storage and move the vehicle periodically if it will sit for extended periods. Modern radials resist static flat-spotting better than older bias-ply designs, but long-term neglect still shortens tire life.

Short collector-style storage intervals usually only require clean, dry conditions and stable pressure. For longer layups, many owners place the vehicle on stands or at least roll it occasionally so one contact patch is not carrying the same load for months. Good storage habits matter just as much for a lightly used crossover as they do for an older collector car, especially when mileage stays low and age becomes the main concern.

Tires on a 2019 Mitsubishi Trucks vehicle should be judged by age as much as by tread depth. A good rule is to begin careful evaluation around five to seven years of service and to treat the ten-year point as a strong replacement consideration, even if the tread still looks usable. The DOT date code on the sidewall is the key reference for tire age.

That matters because many low-use vehicles accumulate very little mileage while the rubber still hardens and the internal structure still ages. A tire can appear healthy at a glance but still be too old for confident road use. If the vehicle is driven infrequently, make sidewall age, cracking, and date-code checks part of regular upkeep rather than waiting for tread wear to force the issue.

Tires on a 2019 Mitsubishi Trucks should be inspected before every drive and given a more thorough check before any extended trip. Look for sidewall cracking, punctures, bulges, irregular wear, and pressure loss, and make sure the tread surface is free of embedded damage. A quick walk-around catches many problems before they turn into roadside failures.

Longer drives call for a closer inspection because heat and sustained speed expose weaknesses that short local trips may not. Check cold inflation pressure, verify that the spare is usable, and inspect valve stems for age or damage while you are there. That routine is especially worthwhile on vehicles that sit for stretches between uses, since inactivity often reveals problems before mileage does.

2019 Mitsubishi Trucks tires in the available 215/70R16 selection include at least one product with an R speed rating, which corresponds to a 106 mph ceiling. Both sizes used here are radial formats, which suits normal modern-road use when the tires are in good condition, properly inflated, and matched to the correct wheel diameter. Real-world safety still depends on the tire's age, condition, and the vehicle's overall mechanical health.

For ordinary highway driving, most owners will reach the vehicle's practical comfort and control limits long before approaching the upper speed capability of the tire itself. The more important questions are whether the tire is the correct size, whether it is aging well, and whether pressures are set appropriately. A fresh, properly maintained radial in the right fitment is far more important than chasing the highest theoretical speed ceiling.

Inflation pressure for 2019 Mitsubishi Trucks should follow the vehicle placard or owner's manual first, because the tire's maximum pressure marking is tied to its maximum rated load rather than normal operating pressure. In 215/70R16, available products include ratings such as 1,765 pounds at 50 psi, 2,094 pounds at 32 psi, and 1,709 pounds at 35 psi. Those figures should not be transferred from one tire design to another or from one size to another.

The practical approach is simple: use the vehicle's specified running pressure as your baseline, then confirm that the selected tire's own load-and-pressure rating is appropriate for the application. If you are changing from one product style to another within the same size, recheck the sidewall and manufacturer guidance rather than assuming the previous setup applies unchanged. Pressure affects wear, ride quality, and load behavior more than many owners realize.

Before a longer drive in a 2019 Mitsubishi Trucks, inspect each tire for cracking, cuts, punctures, bulges, uneven wear, and correct cold pressure. Verify that the tire size on the vehicle matches the wheel diameter actually installed, especially on an Eclipse Cross that may use either 16-inch or 18-inch fitment. The spare tire, jack equipment, and valve stems deserve the same attention as the road tires.

Tires are only one part of trip preparation, but they are the part in direct contact with the road. Once the tire check is complete, include the usual longer-drive basics such as brakes, fluids, lights, and battery condition. On a modern Mitsubishi crossover, a careful pre-drive inspection is less about rarity and more about preventing simple, avoidable trouble that starts with an overlooked tire or pressure issue.