2016 Dodge Trucks Tire Fitment Guide

2016 Dodge Trucks vehicles use four distinct tire sizes across two models. The Durango uses 265/50R20 or 265/60R18, while the Journey uses 225/55R19 or 225/65R17. These are all radial sizes, and they do not share one common rim diameter across the full Dodge Trucks range for the year. The 225/65R17 size fits a 17-inch rim and works with rim widths from 6.0 to 8.0 inches.

That means year and make alone are not enough to choose a tire for 2016 Dodge Trucks. You need to confirm the model first, then verify the wheel diameter already on the vehicle. If the vehicle has been changed from its original wheel package, checking the size molded into the existing tire sidewall is the fastest way to avoid mixing up Durango and Journey fitments.

On a 2016 Dodge Trucks tire, 265/50R20 is a metric radial size. The 265 is the section width in millimeters, 50 is the aspect ratio, meaning the sidewall height is 50 percent of the section width, R identifies radial construction, and 20 is the wheel diameter in inches. For 2016 Dodge Trucks, that size applies to the Durango rather than the Journey.

That code matters because each part affects compatibility with the wheel and the overall stance of the vehicle. A 265/50R20 must be matched to a 20-inch wheel, so it cannot substitute directly for an 18-inch Durango size or either Journey size. If you are replacing only tires and not wheels, matching the full sidewall code is the safest starting point before comparing brands or tread styles.

No, 2016 Dodge Trucks models do not use the same tire size. The Durango uses 265-millimeter-wide tires in either 18-inch or 20-inch wheel fitments, while the Journey uses 225-millimeter-wide tires in either 17-inch or 19-inch wheel fitments. Every size in the 2016 Dodge Trucks range is model-specific rather than shared across both vehicles.

That distinction is important because a buyer looking only at year and make could still end up with the wrong size. The Durango and Journey serve different roles and wear different wheel packages, so replacement tire shopping should begin with the model badge and wheel diameter. If your vehicle has aftermarket wheels, confirm the actual sidewall marking before assuming the original factory combination is still in place.

BFGoodrich is represented in 2016 Dodge Trucks fitment coverage through the 225/65R17 Journey size. That tire is the All-Terrain T/A KO2, a radial design with an RBL sidewall and an S speed rating. The other 2016 Dodge Trucks sizes remain size-specific fitments within the model range, so brand choice should always be checked against the exact size on your vehicle.

For a buyer, that means the brand conversation starts after the fitment conversation. First confirm whether you have a Durango or Journey and which wheel diameter it uses, then compare the tires available in that exact size. Brand reputation, tread character, and sidewall appearance all matter, but none of them matter more than starting with the correct size code and wheel diameter.

2016 Dodge Trucks tire sidewall styling can vary by size and product, and the 225/65R17 Journey fitment includes an RBL sidewall. RBL stands for raised black lettering, giving the tire a more utility-oriented and truck-inspired visual character than a plain blackwall. Sidewall appearance is not just cosmetic; it changes how the vehicle presents, especially on SUVs and crossovers with exposed tire profile.

If your 2016 Dodge Trucks vehicle is a Journey on 225/65R17 tires, choosing an RBL sidewall can reinforce a tougher, more functional look. Owners who want a more subdued appearance should compare the exact sidewall treatment of any candidate tire before deciding. Since sidewall style is often one of the first things you notice at a glance, it is worth treating as part of the selection process rather than an afterthought.

Choosing the right tire size for a 2016 Dodge Trucks vehicle starts with model identification and wheel diameter, not with tread style. Durango fitments are 265/50R20 or 265/60R18, while Journey fitments are 225/55R19 or 225/65R17. All four are radial sizes, so the main variable is matching the exact wheel package used on your particular vehicle.

Once you confirm the size already on the vehicle, then you can compare the available tire types within that fitment. That approach keeps the process straightforward and prevents accidental cross-shopping between Durango and Journey applications. If you have a used vehicle and are uncertain whether the wheels are original, compare the tire sidewall code, wheel diameter, and door-jamb placard before making a final choice.

Rim width guidance is size-specific on 2016 Dodge Trucks tires. For the 225/65R17 Journey fitment, the available tire fits rim widths from 6.0 to 8.0 inches on a 17-inch diameter wheel. That range applies to the tire itself and should not be automatically carried over to the 225/55R19, 265/60R18, or 265/50R20 sizes, which need to be matched to their own wheel dimensions.

The practical takeaway is that rim diameter must match exactly, and rim width still needs to be checked before mounting any replacement tire. If your wheels are factory-original, that usually keeps you in the right range, but modified vehicles deserve a closer look. Reading the wheel stamp or consulting a wheel specialist can prevent bead seating issues and preserve the intended tire shape on the vehicle.

2016 Dodge Trucks tires in these fitments are radial designs, and the 225/65R17 example does not show a tube-type marking in its service description. That points buyers toward modern tubeless-style fitment rather than a traditional inner-tube arrangement. Tube requirements can still depend on the exact tire selected and the wheel condition, especially if the wheel has corrosion, damage, or a sealing issue.

For most owners, the right approach is to treat the wheel and tire as a system rather than assuming every radial automatically mounts the same way. If the wheels are original and in good condition, tubeless setup is usually the expectation on a 2016-era Dodge product. Before mounting, confirm the sidewall marking on the tire you choose and make sure the wheel itself is suitable for airtight sealing.

A 2016 Dodge Trucks vehicle should be stored on clean, properly inflated tires in a cool, dry space away from direct sunlight, electric motors, furnaces, and other ozone-producing equipment. Ozone, heat, and UV exposure accelerate sidewall aging even when tread wear is minimal. If the vehicle sits for extended periods, moving it occasionally helps reduce prolonged stress in one contact patch area.

That matters because many Durango and Journey vehicles now see intermittent enthusiast or second-car use rather than daily commuting. Keeping the tires off damp surfaces, maintaining pressure, and avoiding long static storage in one exact position can help preserve ride quality and sidewall condition. If the vehicle will sit for a season, some owners also use stands or cradles to reduce the load on the tires.

Tires on a 2016 Dodge Trucks vehicle should be judged by age and condition as much as by remaining tread depth. A common collector and enthusiast guideline is to begin careful evaluation around five to seven years of service and to treat about ten years from the DOT date code as a serious replacement threshold, even if mileage is low. Heat cycles, storage conditions, and inflation history all affect real-world aging.

That is especially relevant for vehicles that look lightly used but spend long periods parked. A Journey or Durango may still have usable tread while the casing and sidewalls have already aged beyond what is wise for regular road use. Checking the DOT date code and comparing it with visible cracking, hardness, or vibration symptoms gives a better picture than mileage alone.

Tires on a 2016 Dodge Trucks vehicle deserve a quick inspection before every drive and a more thorough look before any highway trip or long outing. Check inflation pressure, tread wear pattern, sidewall cracking, cuts, bulges, punctures, and any sign that the tire is losing air between uses. Irregular wear can also signal alignment or suspension issues rather than a tire problem by itself.

That routine is worthwhile even on newer-era enthusiast vehicles because age and storage can create problems that are not obvious from a distance. If the vehicle is driven only occasionally, also inspect the spare and verify that the valve stems remain sound. Catching a small issue in the garage is far easier than discovering it after the vehicle has already been loaded for a road trip.

2016 Dodge Trucks tire safety on the highway depends on choosing the correct size, maintaining proper condition, and staying within the tire’s service limits. The available 225/65R17 example carries an S speed rating, which corresponds to a 112 mph ceiling, far above normal U.S. highway travel. Since these are modern radial fitments, day-to-day road behavior is generally aligned with what owners expect from contemporary SUV and crossover tires when the tire is in sound condition.

Real safety comes from the whole vehicle, not the speed symbol alone. A Durango or Journey with worn suspension parts, poor alignment, aging brakes, or old tires will not feel confident at highway speeds even if the tire rating itself is adequate. Before a longer highway drive, verify age, condition, pressure, and load suitability rather than assuming any tire with remaining tread is automatically ready.

Inflation pressure for 2016 Dodge Trucks tires should begin with the factory vehicle placard or owner’s manual, because vehicle makers set pressure based on weight distribution, suspension tuning, and intended ride quality. For the available 225/65R17 tire, the service description includes a maximum load of 2,150 pounds at 65 psi. That figure is the tire’s rated maximum and should not be treated as the default running pressure for every Journey application.

The key is to separate tire capability from vehicle recommendation. Running pressure should match the vehicle manufacturer’s target unless a tire maker or qualified specialist calls for something different in a specific use case. Never transfer a pressure figure from the 225/65R17 Journey fitment to the 225/55R19, 265/60R18, or 265/50R20 sizes without checking the correct specification for that exact tire and vehicle combination.

Before taking a 2016 Dodge Trucks vehicle on a longer drive, inspect each tire for cracks, cuts, bulges, punctures, uneven wear, and proper inflation. Confirm that the tire size on the vehicle matches the wheel diameter, and make sure the spare is usable as well. On a modern SUV or crossover, it is also smart to look for signs of vibration, pull, or feathered tread that could point to alignment or suspension wear.

A tire check should be part of a broader pre-trip inspection rather than a standalone step. Brakes, fluids, battery condition, and lights matter just as much on a longer run, especially if the vehicle has been sitting. Spending a few minutes on those basics can prevent the most common trip-ending problems and gives you confidence that the tires are working as part of a roadworthy whole.