The 2025 Hyundai Trucks Santa Cruz blends compact pickup utility with crossover-based road manners, giving it a very different tire story than a traditional body-on-frame truck. Buyers usually approach this vehicle with a trim-specific fitment question, because tire size changes with the exact Santa Cruz sub-model. For 2025, the Santa Cruz uses radial tires in either 245/60R18 or 245/50R20 depending on configuration. That makes wheel diameter and trim identification just as important as the tire size itself, especially when appearance, ride character, and replacement cost all come into play. The right choice starts with matching the correct factory-size format to the actual wheel setup on the truck.
Which Tire Size Is Right for The 2025 Hyundai Trucks Santa Cruz
The 2025 Hyundai Trucks Santa Cruz uses two primary tire sizes, and the correct one depends on the exact sub-model and wheel diameter. Both are radial metric sizes, but one fits 18-inch wheels and the other fits 20-inch wheels, so the first step is confirming which trim level and wheel package the truck actually has before comparing replacement tires.
245/50R20 is a metric radial size in which 245 identifies the nominal section width in millimeters, 50 is the aspect ratio, R denotes radial construction, and 20 is the wheel diameter in inches. On the 2025 Hyundai Trucks Santa Cruz, this size is tied to a specific sub-model rather than the full range. Its lower-profile format gives the truck a different visual stance than the 18-inch fitment, so replacement selection should begin with wheel confirmation. This is the size to evaluate when the Santa Cruz is equipped with 20-inch wheels and needs a like-for-like metric radial replacement.
245/60R18 is a metric radial size where 245 is the nominal section width in millimeters, 60 is the aspect ratio, R indicates radial construction, and 18 identifies the rim diameter in inches. On the 2025 Hyundai Trucks Santa Cruz, this fitment applies across several sub-models, making it the more widely shared size within the lineup. Even though its section width matches the 20-inch option, it is built for a different wheel diameter and should be selected only for the correct 18-inch setup. This size is the right starting point when matching replacement tires to the standard 18-inch wheel fitment.
Sub-model fitment matters on the 2025 Hyundai Trucks Santa Cruz because tire size is not the same across the lineup. Most trims use the 18-inch radial fitment, while one trim steps up to a 20-inch wheel and a different metric tire size, so identifying the exact model is the key first step.
1
2025 Hyundai Trucks Santa Cruz Limited
The 2025 Hyundai Trucks Santa Cruz Limited uses the 245/50R20 radial size, which separates it from the other Santa Cruz trims covered here. Tire selection for the Limited starts with confirming the 20-inch wheel setup and then choosing a replacement that stays true to that lower-profile metric fitment.
The 2025 Hyundai Trucks Santa Cruz SE uses the 245/60R18 radial size. That makes the buying decision more straightforward, with the main task being to match the truck to its 18-inch wheel fitment before comparing replacement tire options.
The 2025 Hyundai Trucks Santa Cruz SEL uses the 245/60R18 radial size, the same basic fitment shared with several other trims. For selection purposes, the focus is less about multiple size choices and more about verifying the existing 18-inch wheels and choosing an appropriate replacement within that metric radial size.
The 2025 Hyundai Trucks Santa Cruz SEL Activity also uses the 245/60R18 radial size. That shared fitment keeps tire replacement fairly simple, but wheel changes or package changes should still be checked before assuming the truck remains on its original 18-inch setup.
The 2025 Hyundai Trucks Santa Cruz XRT uses the 245/60R18 radial size. Replacement planning should center on keeping the correct 18-inch metric radial fitment in place and confirming the actual wheel setup if the truck has been modified for a different look or use.
The tire sizes listed on this page assume factory-standard vehicle configuration. The following modifications may affect tire fitment and are not reflected in this guide:
Suspension changes (lowering, lift kits, spring replacements)
Body alterations (fender modifications, custom bodywork)
If your vehicle has been modified from factory specifications, verify tire clearance before purchase.
Frequently Asked Questions
Tire questions for the 2025 Hyundai Trucks Santa Cruz usually come down to trim-level sizing, 18-inch versus 20-inch wheels, and how to confirm the right metric radial fitment before replacement. These FAQs focus on size, wheel fitment, tire selection, and practical inspection steps for road use.
Tire Size & Fitment
What tire size fits a 2025 Hyundai Trucks Santa Cruz?
The 2025 Hyundai Trucks Santa Cruz uses two tire sizes: 245/60R18 and 245/50R20. The 245/60R18 size fits the SE, SEL, SEL Activity, and XRT, while the Limited uses 245/50R20. Both are radial metric sizes, but they are tied to different wheel diameters and sub-models.
The practical step is to confirm the exact trim and the actual wheels currently on the truck before ordering replacements. A Santa Cruz that has had wheel changes, accessory packages, or previous tire substitutions may not still match its original setup, so checking the door placard and the tire sidewall together helps prevent choosing the wrong size.
What size rim does a 2025 Hyundai Trucks Santa Cruz use?
A 2025 Hyundai Trucks Santa Cruz uses either an 18-inch or 20-inch rim, depending on the sub-model. The 245/60R18 fitment is built for an 18-inch wheel, while the 245/50R20 fitment is built for a 20-inch wheel. The tire size itself tells you the wheel diameter in the last number of the size code.
Wheel diameter is the first fitment detail to verify because a tire for an 18-inch rim cannot be mounted on a 20-inch wheel, and the reverse is also true. Looking at the current tire sidewall is the quickest check, but it is also smart to confirm that the wheels are original to the truck if it was purchased used.
Why does the 2025 Hyundai Trucks Santa Cruz have more than one tire size?
The 2025 Hyundai Trucks Santa Cruz has more than one tire size because the lineup uses different wheel packages by sub-model. Most trims use 245/60R18, while the Limited uses 245/50R20. Both are radial metric sizes, but they are matched to different wheel diameters and trim-specific setups.
That means tire selection starts with identifying the exact Santa Cruz model and confirming whether it still has its original wheel package. Two tires can share the same section width but still be wrong for the truck if the rim diameter is different, so trim name alone should be checked against the actual tires currently installed.
Choosing the Right Tire
What should I consider when choosing a 2025 Hyundai Trucks Santa Cruz tire?
Start with the correct size for the exact truck: 245/60R18 for SE, SEL, SEL Activity, and XRT, or 245/50R20 for Limited. Both are radial metric fitments, so the main selection issue is not bias-ply versus radial, but matching the right size to the correct wheel diameter and sub-model.
After size is confirmed, compare the tire's intended use with how the Santa Cruz is driven. A daily-driven truck, a highway-focused truck, and a truck that sees rougher seasonal use can all point a buyer toward different replacement priorities, but none of that matters until the basic fitment, wheel size, and clearance are correct.
How do I choose between the available 245/60R18 and 245/50R20 tires for a 2025 Hyundai Trucks Santa Cruz?
The first choice is not between the two sizes themselves, but between the truck's actual wheel setups. A 2025 Hyundai Trucks Santa Cruz with 18-inch wheels needs 245/60R18, while a Limited with 20-inch wheels uses 245/50R20. The two sizes are not alternate primary fitments for the same wheel.
Once the correct size is established, look at how the truck is used and whether the current wheels are original. A used Santa Cruz may have been changed from its factory wheel package, so checking the sidewall markings, wheel diameter, and vehicle trim together is more reliable than selecting a tire by appearance alone.
What rim-width specifications should I compare when choosing 2025 Hyundai Trucks Santa Cruz tires?
Rim width matters because a tire has to be compatible not just with the correct diameter, but also with the wheel's actual width. On a 2025 Hyundai Trucks Santa Cruz, that means confirming the truck's existing wheel setup before assuming any tire in 245/60R18 or 245/50R20 is appropriate for the wheel already on the vehicle.
This becomes especially important if the truck has aftermarket wheels or a previous owner changed the package for appearance. A proper tire decision should account for the real wheel dimensions, not just the trim badge, because the correct tire size still needs a compatible wheel width and adequate clearance in normal driving and full steering travel.
Restoration & Appearance
Does correct tire fitment matter for a 2025 Hyundai Trucks Santa Cruz restoration or refresh?
Yes, correct tire fitment still matters even on a newer truck like the 2025 Hyundai Trucks Santa Cruz, especially if the goal is to return it to a clean, original-style appearance. The visual difference between 245/60R18 and 245/50R20 is significant because each size is tied to a different wheel diameter and trim presentation.
A careful refresh should begin by confirming the truck's actual sub-model and wheel setup, then matching the replacement tire size to that configuration. When appearance matters, staying with the proper metric size helps preserve the stance and proportions intended for that trim without introducing fitment questions caused by an incorrect wheel diameter.
Which tire should I choose for a factory-style 2025 Hyundai Trucks Santa Cruz look?
A factory-style look starts with using the correct trim-specific tire size rather than trying to substitute between the two available fitments. The 2025 Hyundai Trucks Santa Cruz Limited uses 245/50R20, while the SE, SEL, SEL Activity, and XRT use 245/60R18. Matching that original size is the foundation of the truck's intended visual stance.
The next step is verifying that the wheels on the truck still match its original diameter. A Santa Cruz with swapped wheels can look close at a glance yet still require a different tire size, so keeping the proper size-to-wheel relationship in place is the safest way to maintain an authentic, trim-appropriate overall appearance.
Fitment, Maintenance & Road Use
Can modifications affect tire fitment on a 2025 Hyundai Trucks Santa Cruz?
Yes, modifications can affect tire fitment on a 2025 Hyundai Trucks Santa Cruz even when the tire size looks close to stock. Wheel changes, offset changes, suspension alterations, and previous tire substitutions can all change how a 245/60R18 or 245/50R20 setup sits in the wheel opening and clears nearby components.
That is why the current wheel diameter and overall setup should be checked before replacing tires. A Santa Cruz that has aftermarket wheels or a changed ride height may need closer attention to clearance at full steering lock and under compression, rather than assuming the original trim-level size still tells the whole story.
What should I inspect before driving a 2025 Hyundai Trucks Santa Cruz on new tires?
Before driving a 2025 Hyundai Trucks Santa Cruz on new tires, inspect the tire size, inflation pressure, wheel condition, and basic installation details. It is also smart to look over the sidewalls and tread area for shipping or mounting damage, and to confirm that the tires match the truck's actual 18-inch or 20-inch wheel setup.
A short, careful road test should follow, with attention to vibration, rubbing, and steering feel. Rechecking pressure after installation and watching for any early signs of clearance issues helps catch problems quickly, especially on a truck that may have aftermarket wheels, suspension changes, or prior fitment changes from a previous owner.
What should I check before a longer drive in a 2025 Hyundai Trucks Santa Cruz?
Before a longer drive, check that the 2025 Hyundai Trucks Santa Cruz has the correct tire size for its trim and wheel diameter, then inspect pressure, tread condition, sidewalls, and any signs of uneven wear. A quick look for cuts, bulges, punctures, or slow air loss is just as important as confirming the basic fitment.
Longer trips are also a good time to verify that no wheel or suspension changes have created rubbing or clearance problems. Even with the correct nominal size, a truck with changed wheels or altered ride height deserves an extra check at full steering lock and over bumps so the tires can be used with confidence on the road.
