The 2024 Nissan Altima remains a practical midsize sedan built for everyday road use, with trim levels that shift its character from straightforward commuter duty to a more assertive, style-forward setup. That matters at tire time, because this Altima uses three different radial sizes depending on sub-model: 215/60R16, 215/55R17, or 235/40R19. The main decision is identifying the exact trim and matching the tire to its wheel diameter and intended presentation, since available choices also vary by tire series and sidewall treatment. For routine replacement, the smart approach is to confirm the car's actual wheel setup before comparing ride, profile, and fitment priorities.
Which Tire Size Is Right for The 2024 Nissan Altima
The 2024 Nissan Altima uses three primary tire sizes, and the correct one depends on the specific sub-model and wheel diameter. All three are radial fitments, but they do not share the same rim size, so the first step is confirming whether the car is on a 16-inch, 17-inch, or 19-inch wheel before selecting a tire.
215/60R16 is a metric radial size in which 215 identifies the nominal section width in millimeters, 60 is the aspect ratio, R denotes radial construction, and 16 is the rim diameter in inches. On the 2024 Nissan Altima, this size serves the S trim and keeps the selection centered on proper everyday replacement rather than on alternative fitment paths. Product comparison in this size should focus on matching the car's 16-inch wheel and checking the tire's overall dimensions against the existing setup. It is the right place to start for owners replacing stock-size tires on an Altima S.
235/40R19 is a metric radial size that uses a 235-millimeter nominal section width, a 40-series profile, and a 19-inch rim diameter. This lower-profile radial fitment applies to the 2024 Nissan Altima SL and SR, giving those trims a distinctly different wheel-and-tire package from the smaller-rim versions. Available choices in this size include BFGoodrich in the g-Force Phenom T/A series with a Blackwall sidewall. Buyers considering this size should confirm they are working with the original 19-inch wheel setup, since the short sidewall and larger rim make wheel verification especially important.
215/55R17 is a metric radial size with a 215-millimeter nominal section width, a 55-series aspect ratio, and a 17-inch rim diameter. On the 2024 Nissan Altima, this size is used on the SV and sits between the taller 16-inch package and the lower-profile 19-inch setup. Product choice is more varied here, with BFGoodrich offerings in both the g-Force Comp 2 AS and g-Force Phenom T/A series, each in Blackwall form. This size is worth evaluating carefully if the car is an SV, because series differences can shape the replacement decision even when the fitment itself is straightforward.
Tire fitment for the 2024 Nissan Altima varies by sub-model rather than staying consistent across the full lineup. Checking the exact trim matters because the S, SV, SL, and SR use different wheel diameters and, in some cases, different tire profiles.
1
2024 Nissan Altima S
The 2024 Nissan Altima S uses the 215/60R16 radial tire size, giving it the smallest wheel diameter among the covered trims. Tire selection here is mainly about staying with the proper 16-inch fitment and confirming that the car has not been changed to a different wheel package.
The 2024 Nissan Altima SL uses the 235/40R19 radial size, which places it on the larger 19-inch wheel package. Replacement decisions should focus on preserving the correct low-profile fitment and verifying wheel compatibility before comparing available product options.
The 2024 Nissan Altima SR also uses the 235/40R19 radial tire size, matching the larger-diameter setup shared with the SL. That means the key step is confirming the car is still on its intended 19-inch wheels before choosing among the available tires in that size.
The 2024 Nissan Altima SV uses the 215/55R17 radial size, a separate fitment from both the 16-inch S and the 19-inch SL and SR. Tire choice for the SV comes down to staying with the correct 17-inch package and comparing the available series within that size.
The tire sizes listed on this page assume factory-standard vehicle configuration. The following modifications may affect tire fitment and are not reflected in this guide:
Suspension changes (lowering, lift kits, spring replacements)
Body alterations (fender modifications, custom bodywork)
If your vehicle has been modified from factory specifications, verify tire clearance before purchase.
Best 2024 Nissan Altima Tires for Sale
Available 2024 Nissan Altima tire choices center on BFGoodrich radial products in the 215/55R17 and 235/40R19 sizes. The product grid lets buyers compare g-Force series options, Blackwall styling, load capacity where stated, and wheel-width compatibility within each supported size.
Owners shopping for 2024 Nissan Altima tires usually need to confirm trim-specific size, wheel diameter, and the available product choices within that fitment. The questions below focus on exact size use, rim fitment, selection factors, and road-use checks before replacement or longer driving.
Tire Size & Fitment
What tire size fits a 2024 Nissan Altima?
The 2024 Nissan Altima uses three different tire sizes depending on trim: 215/60R16, 215/55R17, and 235/40R19. The S uses 215/60R16, the SV uses 215/55R17, and the SL and SR use 235/40R19, so there is not one universal Altima size for the entire model line.
The practical step is to confirm the exact sub-model and wheel diameter on the car before buying tires. If the vehicle has had wheel changes since new, the current setup matters just as much as the trim badge, because a 16-inch, 17-inch, or 19-inch wheel requires a different tire fitment.
What size rim does a 2024 Nissan Altima use?
Rim diameter on the 2024 Nissan Altima depends on sub-model. The S uses a 16-inch rim with 215/60R16 tires, the SV uses a 17-inch rim with 215/55R17 tires, and the SL and SR use a 19-inch rim with 235/40R19 tires.
Wheel diameter should be verified before focusing on brand or tire series, since the wrong rim size stops the fitment process immediately. Looking at the tire sidewall is a quick check, but owners should also confirm that the car has not been changed to aftermarket wheels that alter the original tire and wheel package.
Do all 2024 Nissan Altima sub-models use the same tire size?
No. The 2024 Nissan Altima lineup uses different tire sizes across its covered sub-models rather than one shared fitment. The S uses 215/60R16, the SV uses 215/55R17, and both the SL and SR use 235/40R19, so tire selection begins with trim identification.
That difference matters because each size is tied to a different wheel diameter and tire profile. Even when two Altimas look similar at a glance, the correct replacement tire may change significantly, so the safest approach is to confirm the exact sub-model and compare the current tire sidewall markings before making a final choice.
Choosing the Right Tire
What should I consider when choosing a tire for a 2024 Nissan Altima?
Start with the correct trim-specific size and wheel diameter, because the 2024 Nissan Altima does not use one tire size across the full lineup. After that, compare construction, tire series, rim-width compatibility, load figures where stated, and whether the tire matches the way the car is actually driven.
A daily-use replacement decision is usually different from a more appearance-conscious or sport-oriented one. Owners should check the existing wheel setup, confirm the same size on all four corners unless the car has been intentionally changed, and then compare the available product details to make sure the chosen tire suits the vehicle's current configuration.
What brands offer tires for the 2024 Nissan Altima?
The available products for the covered 2024 Nissan Altima sizes come from BFGoodrich. In the listed fitments, BFGoodrich appears in 235/40R19 and 215/55R17, with g-Force series options that vary by size and product specification.
Brand alone should not drive the decision, especially when the Altima uses multiple trim-specific sizes. The better comparison is to match the right size first, then look at the tire series, sidewall style, wheel-width specification, and any stated load details so the final choice aligns with the actual wheel package on the car.
What tire series are available for the 2024 Nissan Altima?
The covered 2024 Nissan Altima product range includes BFGoodrich g-Force Phenom T/A and g-Force Comp 2 AS series tires. The 235/40R19 fitment is represented by the g-Force Phenom T/A, while 215/55R17 includes both the g-Force Comp 2 AS and g-Force Phenom T/A series.
Series names become most useful after the correct tire size is settled, because they help distinguish the available choices within a given fitment. A buyer comparing 215/55R17 tires, for example, has more than one series to weigh, while someone replacing 235/40R19 should focus on that size's available specification details and wheel-width compatibility.
Restoration & Appearance
Does correct tire fitment matter for a 2024 Nissan Altima restoration?
Yes. Even on a much newer vehicle such as the 2024 Nissan Altima, correct tire fitment still matters if the goal is to keep the car visually and mechanically consistent with its intended trim-level setup. The right size preserves the relationship between wheel diameter, tire profile, and the overall stance of the vehicle.
An Altima S on 215/60R16 presents differently from an SL or SR on 235/40R19, so trim accuracy affects appearance as well as fitment. Owners pursuing a true restoration-minded approach should confirm the sub-model, inspect the actual wheels on the car, and use vehicle-specific documentation if exact original presentation is especially important.
How does tire construction affect the appearance of a restored 2024 Nissan Altima?
For the 2024 Nissan Altima, the primary fitments are radial, so construction choice is more straightforward than it is on many collector cars. The visual impact comes less from bias-ply versus radial differences and more from keeping the correct size, sidewall height, and wheel diameter for the specific trim.
A taller 215/60R16 creates a different look than a lower-profile 235/40R19, even though both are radial designs. Anyone aiming for a restoration-oriented result should focus on trim-specific size accuracy and matching the car's wheel package first, then compare sidewall presentation and product details within that proper fitment.
Fitment, Maintenance & Road Use
Can modifications affect tire fitment on a 2024 Nissan Altima?
Yes. Wheel changes, suspension lowering, altered offsets, or body modifications can all affect tire fitment on a 2024 Nissan Altima, even when the replacement tire matches one of the standard Altima sizes. That is especially important because the model already spans 16-inch, 17-inch, and 19-inch factory-style fitments.
An Altima with aftermarket wheels may need closer checking for inner clearance, outer fender space, and proper wheel width before a tire is chosen. Owners should verify the actual wheel diameter and width on the car, then compare that setup against the tire's stated rim-width specification instead of assuming the trim's original size still applies.
What should I inspect before driving a 2024 Nissan Altima on new tires?
Before driving a 2024 Nissan Altima on new tires, inspect the wheel condition, confirm the tire size matches the car's trim and rim diameter, and check inflation pressure. It is also smart to look over valve stems, lug nut torque, and any signs of rubbing or clearance problems once the tires are mounted.
A short local drive followed by a second inspection can catch issues early, particularly if the car has aftermarket wheels or recent suspension work. Uneven seating, air loss, vibration, or unexpected contact at full steering lock should be addressed promptly so the new tires are working with the vehicle setup rather than against it.
What should I check before a longer drive in a 2024 Nissan Altima?
Before a longer drive, make sure the 2024 Nissan Altima's tires are the correct size for the trim, inflated properly, and free of cuts, bulges, or abnormal wear. Tread condition, air retention, and visible wheel damage are all worth checking, especially if the car has recently received replacement tires.
Longer highway use puts more emphasis on stability and heat control, so a quick walkaround is not enough if something feels off. Owners should also pay attention to vibration, pulling, or contact noises during the first miles, since those signs can point to balance issues, alignment concerns, or a mismatch between the tire and wheel setup.
