The 2024 McLaren Artura represents McLaren’s modern hybrid supercar direction, blending lightweight engineering with the sharp responses buyers expect from a mid-engine exotic. It is a highly technical car, and its tire fitment reflects that with a staggered radial setup: 235/35R19 in front and 295/35R20 in the rear. That means the first decision is not choosing between several primary sizes for the same position, but matching the correct front and rear fitment and wheel diameter. Available choices focus on blackwall performance radials from Nitto and BFGoodrich, so the real comparison comes down to brand, tire series, and wheel compatibility for the exact setup on the car.
Which Tire Size Is Right for The 2024 McLaren Artura
The 2024 McLaren Artura uses two primary tire sizes, and they serve different positions on the car rather than different trim-dependent setups. The front uses a 19-inch radial tire and the rear uses a 20-inch radial tire, so confirming wheel position and rim diameter comes first before comparing brands or tire series.
Fit(s): Base Front, Performance Front, TechLux Front, and Vision Front
Construction: Radial|Rim: 19 in
235/35R19 is a modern metric radial size in which 235 identifies the nominal section width in millimeters, 35 is the aspect ratio, R denotes radial construction, and 19 is the wheel diameter in inches. On the 2024 McLaren Artura, this size is used at the front, where steering response and proper wheel match matter. Available choices include blackwall radial tires from Nitto and BFGoodrich in performance-oriented series. This is the size to evaluate when replacing front tires and confirming compatibility with the car’s 19-inch front wheel setup.
Fit(s): Base Rear, Performance Rear, TechLux Rear, and Vision Rear
Construction: Radial|Rim: 20 in
295/35R20 is a modern metric radial size with a 295-millimeter nominal section width, a 35-series profile, radial construction, and a 20-inch rim diameter. On the 2024 McLaren Artura, this size is used at the rear, making it part of the car’s staggered front-to-rear tire arrangement. The available product selection in this size includes a blackwall Nitto NT555 G2 radial. This is the rear fitment to verify when replacing tires, especially if the car has non-original wheels or any setup changes that could affect width or clearance.
Fitment stays consistent across the covered Artura sub-models, with the same 235/35R19 front and 295/35R20 rear staggered setup used throughout. Checking the exact sub-model still helps confirm position-specific replacement, especially since front and rear tire sizes are not interchangeable.
1
2024 McLaren Artura Base Front
The 2024 McLaren Artura Base Front uses the 235/35R19 radial fitment on a 19-inch front wheel. That keeps the selection focused on choosing the right blackwall performance radial for the front position and confirming wheel compatibility before installation.
The 2024 McLaren Artura Base Rear uses the 295/35R20 radial fitment on a 20-inch rear wheel. Tire selection here centers on maintaining the proper rear size in the staggered setup and checking for adequate wheel match and clearance.
The 2024 McLaren Artura Performance Front uses the same 235/35R19 radial tire size as the other covered front-position Artura trims. That means the buying decision is centered on front-position product choice rather than a different primary fitment.
The 2024 McLaren Artura Performance Rear uses the same 295/35R20 radial size found on the other covered rear-position Artura trims. For replacement, the important step is keeping the rear fitment matched to the 20-inch wheel and staggered layout.
The 2024 McLaren Artura TechLux Front uses 235/35R19 radial tires, just like the other covered front Artura configurations. That keeps fitment straightforward, with attention shifting to brand choice, tire series, and front-wheel compatibility.
The 2024 McLaren Artura TechLux Rear uses the 295/35R20 radial rear fitment. That makes the rear tire decision less about trim variation and more about maintaining the correct staggered sizing and wheel match.
The 2024 McLaren Artura Vision Front uses the same 235/35R19 radial size as the other covered Artura front positions. Replacement is mainly a matter of selecting the right front tire within that size and verifying the actual wheel setup on the car.
The 2024 McLaren Artura Vision Rear uses 295/35R20 radial tires at the rear. Since the rear fitment is specific to position, selection should stay focused on preserving the proper staggered arrangement and confirming wheel and clearance compatibility.
The tire sizes listed on this page assume factory-standard vehicle configuration. The following modifications may affect tire fitment and are not reflected in this guide:
Suspension changes (lowering, lift kits, spring replacements)
Body alterations (fender modifications, custom bodywork)
If your vehicle has been modified from factory specifications, verify tire clearance before purchase.
Best 2024 McLaren Artura Tires for Sale
Available 2024 McLaren Artura tire choices center on blackwall radial performance tires. The front 235/35R19 fitment is offered by Nitto and BFGoodrich, while the rear 295/35R20 fitment includes a Nitto NT555 G2 option, giving buyers a straightforward brand and tire-series comparison.
2024 McLaren Artura tire questions usually come down to staggered sizing, front-versus-rear wheel fitment, product selection, and the checks that matter before road use. The answers below focus on those exact decisions for this model.
Tire Size & Fitment
What tire size fits a 2024 McLaren Artura?
The 2024 McLaren Artura uses a staggered tire setup with 235/35R19 at the front and 295/35R20 at the rear. Both are radial tire sizes, and they are position-specific rather than interchangeable across the car.
That means the key fitment step is matching each tire to the correct axle and wheel diameter. A front replacement needs the 19-inch fitment, while a rear replacement needs the 20-inch fitment, so owners should confirm both wheel position and the actual wheel setup on the car before choosing a tire.
What size rim does a 2024 McLaren Artura use?
The 2024 McLaren Artura uses a 19-inch rim at the front with the 235/35R19 tire size and a 20-inch rim at the rear with the 295/35R20 tire size. The car’s tire fitment is staggered, so front and rear wheel diameters are different.
That front-to-rear difference matters any time tires are replaced individually. Owners should verify which end of the car needs tires and confirm the wheel diameter before comparing options, especially if the Artura has been fitted with aftermarket wheels or any previous wheel and tire changes.
Do all 2024 McLaren Artura sub-models use the same tire size?
The covered 2024 McLaren Artura sub-models share the same staggered fitment pattern. Base, Performance, TechLux, and Vision models use 235/35R19 in front and 295/35R20 in the rear.
That makes sub-model fitment straightforward, but position still matters because the front and rear sizes are different. Even when trim level does not change the primary tire sizes, it is still wise to confirm whether the car retains its original wheel arrangement or has been modified since that can affect final tire choice.
Choosing the Right Tire
What should I consider when choosing a 235/35R19 and 295/35R20 tire set for a 2024 McLaren Artura?
The main factors are using the correct front and rear sizes, keeping radial construction, and matching each tire to the proper wheel diameter. On the 2024 McLaren Artura, that means 235/35R19 for the front and 295/35R20 for the rear.
From there, compare the available tire series, brand, and wheel-compatibility details for the position being replaced. A front tire choice should be checked against the 19-inch front wheel, and a rear tire should be checked against the 20-inch rear wheel, with special attention to any wheel changes or altered suspension settings.
What sidewall styles are available for 2024 McLaren Artura tires?
The available tire options for the 2024 McLaren Artura use a blackwall sidewall style. That applies to the currently covered choices in both the 235/35R19 front size and the 295/35R20 rear size.
For an Artura owner, that keeps appearance selection simple and puts more emphasis on brand and tire series. Since the sidewall treatment does not vary here, the more important comparison points are correct size, correct wheel diameter, and the exact product characteristics that fit the front or rear position being replaced.
What brands offer tires for the 2024 McLaren Artura?
Available 2024 McLaren Artura tire choices include Nitto and BFGoodrich. Nitto appears in both the 235/35R19 front size and the 295/35R20 rear size, while BFGoodrich is available in the 235/35R19 front fitment.
That means some owners may be comparing brands on the front axle while the rear selection remains narrower. A practical approach is to start with the correct tire position and size, then compare the available tire series and any wheel-compatibility details that apply to the exact front or rear replacement need.
Fitment, Maintenance & Road Use
Can modifications affect tire fitment on a 2024 McLaren Artura?
Yes. Any changes to wheel width, wheel offset, suspension height, or body clearance can affect tire fitment on a 2024 McLaren Artura even when the tire size itself matches the standard front or rear specification.
A modified Artura should be checked for front steering clearance, rear fender clearance, and the actual wheel dimensions before replacing tires. Since this car uses a staggered 19-inch front and 20-inch rear setup, even small wheel or suspension changes can alter how comfortably a replacement tire works within the available space.
What should I inspect before driving a 2024 McLaren Artura on new tires?
Start by confirming that the correct tire size is mounted in the correct position, then inspect inflation pressure, bead seating, valve condition, and overall tire condition. The tire should also be checked for cuts, bulges, or any sign of shipping or installation damage before road use.
It also helps to look over the wheels and suspension for anything that could affect clearance or alignment. On a staggered car like the 2024 McLaren Artura, a careful final check of front versus rear fitment is especially important before putting meaningful road miles on a newly installed tire set.
How often should tires on a 2024 McLaren Artura be inspected?
Tires on a 2024 McLaren Artura should be inspected regularly rather than only at replacement time. Pressure, tread wear, sidewall condition, and any signs of uneven wear deserve routine attention, especially on a high-performance car that uses different front and rear tire sizes.
Frequent inspection helps catch issues such as air loss, impact damage, or alignment-related wear before they become more serious. Owners who drive infrequently should still check the tires periodically, since low-use vehicles can develop age-related condition concerns even when tread depth still looks acceptable.
