The 2024 Genesis Trucks GV70 brings modern luxury-crossover styling and performance into a segment where wheel and tire choice strongly shapes both stance and road feel. Its mix of comfort-focused and sport-oriented trims makes tire fitment more configuration-specific than a one-size-fits-all answer. This GV70 uses either 235/55R19 or 255/40R21 radial tires, depending on the sub-model. That means the decision is not just about replacing a worn tire, but about matching the exact wheel diameter and profile your GV70 was built around. Before choosing a replacement, confirm the trim and wheel setup on the vehicle, especially if wheels have been changed since new.
Which Tire Size Is Right for The 2024 Genesis Trucks GV70
The 2024 Genesis Trucks GV70 uses two primary tire sizes, and the correct one depends on the exact sub-model. Both are radial fitments, but they mount on different wheel diameters: 19-inch or 21-inch. The first step is confirming the trim and wheel size on the vehicle, because choosing between these fitments starts with the wheel, not just the tire’s overall look.
Fit(s): 2.5T AWD, Advanced 2.5T AWD, Select 2.5T AWD, and Sport 3.5T AWD
Construction: Radial|Rim: 19 in
235/55R19 is a metric radial size in which 235 identifies the section width in millimeters, 55 is the aspect ratio, R denotes radial construction, and 19 is the rim diameter in inches. On the 2024 Genesis Trucks GV70, this size supports trims equipped with 19-inch wheels and gives the buyer a straightforward modern replacement format. Its dimensions point to a balanced crossover fitment rather than an ultra-low-profile setup. When replacing this size, the key checks are maintaining the 19-inch wheel requirement and matching the tire to the GV70’s exact trim and current wheel package.
Fit(s): Sport Advanced 3.5T AWD, Sport Prestige 2.5T AWD, and Sport Prestige 3.5T AWD
Construction: Radial|Rim: 21 in
255/40R21 is a metric radial size where 255 represents the tire’s section width in millimeters, 40 is the aspect ratio, R indicates radial construction, and 21 is the wheel diameter in inches. On the 2024 Genesis Trucks GV70, this fitment belongs to sub-models equipped with larger 21-inch wheels and a noticeably lower-profile tire. That makes wheel confirmation especially important, since this size is tied to a different rim diameter than the 19-inch setup. Buyers considering replacement should make sure the GV70 still has its intended 21-inch wheel package and enough clearance for the original tire profile.
Tire fitment on the 2024 Genesis Trucks GV70 varies by sub-model, so trim identification matters before selecting a replacement. Some GV70 configurations use a 19-inch setup, while others move to a 21-inch wheel and tire package.
1
2024 Genesis Trucks GV70 2.5T AWD
The 2024 Genesis Trucks GV70 2.5T AWD uses the 235/55R19 radial tire size. Tire selection starts with confirming the factory-style 19-inch wheel setup and then choosing a replacement that matches the intended overall profile for everyday road use.
The 2024 Genesis Trucks GV70 Advanced 2.5T AWD also uses the 235/55R19 radial size. That keeps fitment straightforward, with the main priority being a correct 19-inch replacement rather than sorting through multiple primary size options.
The 2024 Genesis Trucks GV70 Select 2.5T AWD uses 235/55R19 radial tires. For this trim, the practical decision is confirming the 19-inch wheel package on the vehicle and replacing the tire with the same size and construction format.
The 2024 Genesis Trucks GV70 Sport 3.5T AWD uses the 235/55R19 radial fitment. Even with the Sport designation, tire replacement should still begin with the actual wheel diameter on the vehicle rather than assuming it shares the larger-wheel setup used on other GV70 sport-oriented trims.
The 2024 Genesis Trucks GV70 Sport Advanced 3.5T AWD uses the 255/40R21 radial tire size. That means replacement centers on the larger 21-inch wheel package, so the buyer should verify the wheel setup carefully before selecting a lower-profile tire in this size.
The 2024 Genesis Trucks GV70 Sport Prestige 2.5T AWD uses 255/40R21 radial tires. This trim’s fitment requires a 21-inch wheel, making wheel-diameter confirmation the most important step before comparing replacement options.
The 2024 Genesis Trucks GV70 Sport Prestige 3.5T AWD uses the 255/40R21 radial size. Buyers replacing tires on this sub-model should stay focused on the 21-inch wheel requirement and confirm that any current wheel or suspension changes have not altered fitment needs.
The tire sizes listed on this page assume factory-standard vehicle configuration. The following modifications may affect tire fitment and are not reflected in this guide:
Suspension changes (lowering, lift kits, spring replacements)
Body alterations (fender modifications, custom bodywork)
If your vehicle has been modified from factory specifications, verify tire clearance before purchase.
Frequently Asked Questions
These FAQs focus on the exact tire sizes used on the 2024 Genesis Trucks GV70, how fitment changes by sub-model, and what to check before replacing tires on 19-inch or 21-inch wheel packages.
Tire Size & Fitment
What tire size fits a 2024 Genesis Trucks GV70?
The 2024 Genesis Trucks GV70 uses either 235/55R19 or 255/40R21 tires. Both are radial sizes, and the correct fitment depends on the specific sub-model. The 19-inch and 21-inch setups are both used within the GV70 range, so there is not one universal size for every trim.
The important next step is confirming the exact trim and wheel diameter on the vehicle before ordering replacement tires. A GV70 equipped with 19-inch wheels needs the matching 19-inch tire size, while a 21-inch wheel package requires the 21-inch fitment. If the vehicle has aftermarket wheels, verify the current setup directly at the wheel and tire.
What size rim does a 2024 Genesis Trucks GV70 use?
The 2024 Genesis Trucks GV70 uses either a 19-inch or 21-inch rim, depending on the sub-model. The 235/55R19 tire fits a 19-inch wheel, while the 255/40R21 tire fits a 21-inch wheel. Rim diameter is built into the tire size, so the wheel and tire must match exactly.
That makes wheel confirmation the first fitment check on any GV70 tire replacement. Even though the two sizes have similar overall diameters, they are designed for different wheel diameters and cannot be treated as interchangeable. Looking at the sidewall size marking and checking the wheel diameter directly will prevent an expensive mismatch.
Why does the 2024 Genesis Trucks GV70 have more than one tire size?
The 2024 Genesis Trucks GV70 has more than one tire size because different sub-models use different wheel packages. Several trims use 235/55R19 on 19-inch wheels, while others use 255/40R21 on 21-inch wheels. The tire size changes with the wheel diameter and the trim’s overall setup.
For the buyer, that means tire selection starts with sub-model identification rather than assuming every GV70 uses the same fitment. Sport-oriented trims do not all share the same wheel size, so it is worth checking the exact sub-model name and the current wheel before replacing tires. That is especially important if the vehicle has had wheel upgrades or package changes.
Choosing the Right Tire
What should I consider when choosing a tire for a 2024 Genesis Trucks GV70?
Start with the correct primary size for the exact GV70 sub-model: either 235/55R19 or 255/40R21. Both are radial fitments, but they belong to different wheel diameters and different trim-level setups. Choosing the right tire begins with matching the size already required by the vehicle’s wheel package.
After size is confirmed, compare the intended use of the vehicle and the condition of the current wheel setup. A daily-driven GV70 may call for different priorities than one used mainly for short local trips, but the size and wheel diameter still come first. It is also smart to inspect for uneven wear that could point to alignment or suspension issues before installing new tires.
How do I choose between the available 235/55R19 and 255/40R21 tires for a 2024 Genesis Trucks GV70?
The choice between 235/55R19 and 255/40R21 is not a style preference on the 2024 Genesis Trucks GV70; it is a fitment decision tied to the vehicle’s exact trim and wheel diameter. A GV70 with 19-inch wheels needs 235/55R19, while a GV70 with 21-inch wheels needs 255/40R21.
Once the correct size is confirmed, compare replacement options within that same size rather than cross-shopping between the two fitments. The two sizes have different sidewall profiles and mount on different rims, so they should be treated as separate replacement paths. Checking the sidewall marking on the existing tire is often the quickest way to confirm which path applies.
What rim-fitment details should I compare when choosing 2024 Genesis Trucks GV70 tires?
The most important rim-fitment detail on a 2024 Genesis Trucks GV70 is wheel diameter. The vehicle uses either a 19-inch or 21-inch wheel, and the tire size must match that diameter exactly. A 235/55R19 is built for a 19-inch rim, while a 255/40R21 is built for a 21-inch rim.
Beyond diameter, it is wise to confirm that the current wheels are the intended ones for the sub-model, especially on a used GV70. Changes in wheel width or aftermarket wheel design can affect how a replacement tire sits and clears the body or suspension. That extra check helps avoid selecting the right size for the wrong wheel setup.
Restoration & Appearance
Does correct tire fitment matter for a 2024 Genesis Trucks GV70?
Correct tire fitment matters on a 2024 Genesis Trucks GV70 because the vehicle uses two distinct modern radial sizes tied to different trims and wheel diameters. Choosing the wrong size can create an immediate mismatch with the wheel, and it can also change the intended tire profile for the vehicle’s setup.
Even on a modern luxury crossover, appearance and stance are part of proper fitment. A GV70 designed around 21-inch wheels presents differently than one equipped with 19-inch wheels, so replacing tires in the proper size helps preserve the vehicle’s intended look. When appearance matters, confirm both the tire size and the actual wheel package before replacement.
How does tire size affect the appearance of a 2024 Genesis Trucks GV70?
Tire size has a visible effect on the appearance of a 2024 Genesis Trucks GV70 because the two fitments use very different wheel diameters and sidewall profiles. The 235/55R19 setup has a taller sidewall on a 19-inch wheel, while the 255/40R21 setup uses a lower-profile tire on a larger 21-inch wheel.
That difference means replacement tires should match the sub-model’s intended wheel and tire package if maintaining the original overall presentation matters. Swapping between these sizes is not simply a cosmetic decision because the wheel diameter changes as well. A quick visual check of the vehicle’s wheels, paired with the sidewall size marking, will usually confirm the right path.
Fitment, Maintenance & Road Use
Can modifications affect tire fitment on a 2024 Genesis Trucks GV70?
Yes, modifications can affect tire fitment on a 2024 Genesis Trucks GV70. Wheel changes, suspension alterations, or lowering can change the clearance relationship around a 235/55R19 or 255/40R21 tire, even when the size itself is correct for the original trim. The GV70’s two factory fitments already involve different wheel diameters, so modified vehicles need extra attention.
A careful check of wheel diameter, wheel width, and clearance at full steering lock is a smart step before replacing tires on a modified GV70. Fender and suspension space should also be reviewed if the vehicle sits differently than stock. That approach helps confirm whether the existing tire size still suits the vehicle’s current setup.
What should I inspect before driving a 2024 Genesis Trucks GV70 on new tires?
Before driving a 2024 Genesis Trucks GV70 on new tires, inspect the installation for the correct size, proper air pressure, and secure wheel attachment. It is also worth checking for any visible interference around the tire, especially if the vehicle uses the larger 21-inch package or has had wheel changes at some point.
A short, careful road test can reveal vibration, pulling, or unusual noise that suggests balance, alignment, or clearance issues. Uneven wear on the old tires should not be ignored, because the same condition can shorten the life of the replacement set. Looking over tread, sidewall condition, and valve stems as part of the changeover is a good habit as well.
How often should tires on a 2024 Genesis Trucks GV70 be inspected?
Tires on a 2024 Genesis Trucks GV70 should be inspected regularly rather than only when replacement is due. The key things to watch are tread wear, air loss, cuts, bulges, and any unusual wear pattern that could indicate alignment or suspension problems. That applies to both the 235/55R19 and 255/40R21 fitments.
It is especially helpful to inspect the tires before longer drives and after any impact with potholes or road debris. A GV70 with low-profile 21-inch tires deserves close attention because wheel and tire damage may be easier to miss at a glance. Consistent pressure checks and visual inspection help catch problems before they become roadside issues.