The 2024 Acura Integra brings a familiar name back as a modern sport compact with sharp styling, hatchback practicality, and a chassis that appeals to drivers who still care about steering feel and response. Tire choice matters more here than it does on an ordinary commuter because each version of the car carries a distinct wheel-and-tire package. The 2024 Acura Integra uses radial tires throughout, with 215/50R17 on the Base, 235/40R18 on the A-Spec, and 265/30R19 on the Type S. Available choices center on blackwall performance radials from BFGoodrich and Nitto in several g-Force and NT555 G2 series. The key is matching the exact sub-model first, then comparing tire character, rim compatibility, and intended road use.
Which Tire Size Is Right for The 2024 Acura Integra
The 2024 Acura Integra uses three primary tire sizes, and the correct one depends on the exact sub-model and wheel diameter. The Base, A-Spec, and Type S do not share the same fitment, so the first step is confirming which Integra you have and whether it still has its original 17-inch, 18-inch, or 19-inch wheel setup. Once that is settled, the decision shifts to comparing available radial tire choices within the correct size.
A 235/40R18 tire uses a 235-millimeter nominal section width, a 40-series aspect ratio, radial construction, and an 18-inch rim diameter. On the 2024 Acura Integra, this is the A-Spec fitment and it places the emphasis on modern radial handling with a lower-profile look than the Base model's 17-inch package. Available choices in this size include BFGoodrich and Nitto blackwall performance tires across g-Force Comp 2 AS, g-Force Sport Comp 2, g-Force Phenom T/A, and NT555 G2 lines. This size is the right place to focus if your Integra is an A-Spec or if the car already runs the correct 18-inch wheel setup.
A 215/50R17 tire uses a 215-millimeter nominal section width, a 50-series aspect ratio, radial construction, and a 17-inch rim diameter. On the 2024 Acura Integra, this size belongs to the Base model and represents the most conventional fitment of the three primary Integra packages. Product choices in this size center on BFGoodrich blackwall radials, including the g-Force Comp 2 AS, g-Force Sport Comp 2, and g-Force Phenom T/A series. This is the size to evaluate when keeping a Base-model Integra on its proper wheel diameter and comparing tire character within the correct overall fitment range.
A 265/30R19 tire uses a 265-millimeter nominal section width, a 30-series aspect ratio, radial construction, and a 19-inch rim diameter. On the 2024 Acura Integra, this size is tied to the Type S and stands apart from the smaller Base and A-Spec packages by using a larger-diameter wheel and a much shorter sidewall profile. That makes wheel confirmation especially important before replacement, particularly on cars that may have seen wheel or suspension changes. This size is the correct starting point only for the Type S configuration or for a car already equipped with the matching 19-inch wheel setup.
Tire fitment for the 2024 Acura Integra varies by sub-model rather than staying consistent across the range. Checking whether the car is a Base, A-Spec, or Type S is essential because each version uses a different radial tire size and a different wheel diameter.
1
2024 Acura Integra A-Spec
The 2024 Acura Integra A-Spec uses a 235/40R18 radial tire, placing it between the Base and Type S in wheel-and-tire size. Tire selection here centers on choosing among available blackwall performance radials while keeping the correct 18-inch wheel fitment in place.
The 2024 Acura Integra Base uses a 215/50R17 radial tire, making it the 17-inch fitment within the Integra lineup. That means replacement starts with confirming the car still has the proper 17-inch wheels, then comparing the available BFGoodrich tire series in the correct size.
The 2024 Acura Integra Type S uses a 265/30R19 radial tire, giving it the most aggressive wheel-and-tire package of the three covered sub-models. Careful wheel confirmation matters here, especially if the car has been modified, because the 19-inch fitment is specific to this version.
The tire sizes listed on this page assume factory-standard vehicle configuration. The following modifications may affect tire fitment and are not reflected in this guide:
Suspension changes (lowering, lift kits, spring replacements)
Body alterations (fender modifications, custom bodywork)
If your vehicle has been modified from factory specifications, verify tire clearance before purchase.
Best 2024 Acura Integra Tires for Sale
Available 2024 Acura Integra tire choices focus on modern blackwall radial performance tires. Depending on size, buyers can compare BFGoodrich and Nitto options across the g-Force Comp 2 AS, g-Force Sport Comp 2, g-Force Phenom T/A, and NT555 G2 series, with rim-width compatibility varying by application.
Common 2024 Acura Integra tire questions usually come down to sub-model fitment, wheel diameter, and choosing the right radial tire within the correct size. Buyers also tend to compare brands, tire series, and practical checks before regular road use.
Tire Size & Fitment
What tire size fits a 2024 Acura Integra?
The 2024 Acura Integra does not use one universal tire size across the range. The Base uses 215/50R17, the A-Spec uses 235/40R18, and the Type S uses 265/30R19, with radial construction across all three fitments.
That makes the first step identifying the exact sub-model and confirming the wheel diameter currently on the car. A Base, A-Spec, or Type S on aftermarket wheels may not match its original setup, so replacement should begin with the car's actual configuration before comparing tire series or brand options.
What size rim does a 2024 Acura Integra use?
Rim diameter depends on which 2024 Acura Integra you have. The Base uses a 17-inch rim with 215/50R17 tires, the A-Spec uses an 18-inch rim with 235/40R18 tires, and the Type S uses a 19-inch rim with 265/30R19 tires.
Matching tire size to the correct rim diameter is essential because a 17-inch, 18-inch, or 19-inch tire cannot be mounted interchangeably. Before replacing tires, check the wheel itself as well as the sidewall marking, especially if the car was purchased used or has had wheel changes since new.
Why does the 2024 Acura Integra have more than one tire size?
The 2024 Acura Integra has more than one tire size because the Base, A-Spec, and Type S use different wheel-and-tire packages. Each sub-model has its own radial fitment, moving from 215/50R17 to 235/40R18 and then to 265/30R19.
For the buyer, that means tire selection is tied directly to trim level and wheel diameter rather than to the Integra name alone. The practical goal is not choosing among all three sizes, but matching the car's exact setup first and then comparing the available tires in that one correct size.
Choosing the Right Tire
What should I consider when choosing a 2024 Acura Integra tire?
Start with the exact factory-size category for your sub-model: 215/50R17 for Base, 235/40R18 for A-Spec, or 265/30R19 for Type S. From there, compare radial tire construction, wheel-diameter match, series character, and rim-width compatibility for the specific size you need.
Available choices lean toward performance-oriented blackwall radials, so the deciding factors are usually how the car is used and whether its wheel setup is still standard. A daily-driven Integra, a weekend car, and a modified car may all need different evaluation even when they share the same nominal tire size.
What brands offer tires for the 2024 Acura Integra?
Available 2024 Acura Integra tire options include BFGoodrich and Nitto, depending on the size. The 235/40R18 A-Spec fitment has BFGoodrich and Nitto choices, while the 215/50R17 Base fitment is represented by BFGoodrich options in the current product range.
Brand alone should not make the decision. It is smarter to compare the exact size, the tire series within that size, and whether the wheel width on the car falls within the tire's stated compatibility range before focusing on which name appears on the sidewall.
What tire series are available for the 2024 Acura Integra?
Current 2024 Acura Integra tire choices include several BFGoodrich g-Force lines and, in 235/40R18, the Nitto NT555 G2. BFGoodrich offerings include g-Force Comp 2 AS, g-Force Sport Comp 2, and g-Force Phenom T/A, all in blackwall radial form.
Those series give buyers something meaningful to compare beyond size alone. Once the correct fitment is confirmed for the Base, A-Spec, or Type S, the next step is weighing series character, wheel-width suitability, and the role the car serves, whether that is regular street driving or a more performance-focused setup.
Restoration & Appearance
Which tire should I choose for a period-style 2024 Acura Integra?
A period-style approach on a 2024 Acura Integra still begins with the correct modern radial size for the specific sub-model. That means 215/50R17 on the Base, 235/40R18 on the A-Spec, or 265/30R19 on the Type S rather than trying to force a different vintage-style fitment onto a contemporary chassis.
Appearance choice here is more about preserving the car's intended stance and wheel relationship than recreating an older bias-ply look. Keeping the proper size, profile, and wheel diameter will usually do more for an authentic presentation than chasing an off-size alternative that changes the car's proportions.
Does correct tire fitment matter for a 2024 Acura Integra restoration or preservation project?
Correct tire fitment matters on a 2024 Acura Integra because each sub-model was built around a specific wheel diameter and tire profile. Using the proper 17-inch, 18-inch, or 19-inch package helps maintain the car's intended visual balance and avoids needless confusion when the vehicle is being preserved carefully.
Preservation-minded owners should document what is on the car now and compare it with the proper size for that trim before replacement. Even on a newer collector candidate, wheel swaps and tire substitutions can change the look substantially, so fitment accuracy is worth checking before cosmetic details take priority.
Fitment, Maintenance & Road Use
Can modifications affect tire fitment on a 2024 Acura Integra?
Yes, modifications can affect tire fitment on a 2024 Acura Integra even when the nominal tire size looks close to stock. Aftermarket wheels, suspension changes, lowering, and alignment changes can all alter clearance, wheel width suitability, and how well a given 17-inch, 18-inch, or 19-inch tire package works on the car.
The safest approach is to confirm the actual wheel diameter and width on the car before ordering replacements. Clearance at the fender, strut, and steering range should also be checked, especially on the Type S or any Integra that no longer uses its original wheel-and-tire combination.
What should I inspect before driving a 2024 Acura Integra on new tires?
Before regular road use, check that the 2024 Acura Integra has the correct tire size for its sub-model and that all four tires are properly mounted on the correct rim diameter. It is also smart to inspect inflation pressure, valve condition, tread seating, and any sign of sidewall damage or air loss.
A short, careful test drive can reveal rubbing, vibration, or pull that was not obvious on the rack. Any Integra with aftermarket wheels or recent suspension work deserves extra attention, since fitment issues often show up first at full lock, over bumps, or under braking.
How often should tires on a 2024 Acura Integra be inspected?
Tires on a 2024 Acura Integra should be inspected regularly rather than only at replacement time. Frequent checks for pressure loss, uneven wear, cuts, punctures, and sidewall damage are especially important on lower-profile fitments such as the A-Spec's 18-inch package and the Type S 19-inch setup.
A practical routine is to inspect the tires visually every few weeks and before longer drives, then look more closely whenever ride quality, noise, or steering feel changes. Cars that sit for stretches should also be checked for flat spotting and slow pressure loss before returning to normal road use.
