The 2021 Hyundai Trucks Kona sits in the modern subcompact crossover class, where trim level and wheel package play a much bigger role in tire selection than on many older vehicles. Its tidy footprint and city-friendly character make wheel-and-tire choice especially visible, both in stance and day-to-day road manners. For this exact Kona, primary fitment is fully radial, but it is not a one-size vehicle: 205/60R16, 215/55R17, and 235/45R18 all apply depending on sub-model. Available choices also vary from blackwall performance-oriented series to a wide whitewall radial in 205/60R16. The key first step is matching the exact trim and wheel diameter before comparing style, series, and road-use priorities.
Which Tire Size Is Right for The 2021 Hyundai Trucks Kona
The 2021 Hyundai Trucks Kona uses three primary tire sizes, and the correct one depends on the specific sub-model and wheel diameter. All three are radial fitments, but they span 16-inch, 17-inch, and 18-inch rims, so confirming the actual wheel on the vehicle comes first. Once that is settled, the decision shifts to tire series, sidewall appearance, and whether the available products suit the way the Kona is driven and presented.
235/45R18 is a modern metric radial size in which 235 identifies the nominal section width in millimeters, 45 is the aspect ratio, R indicates radial construction, and 18 is the rim diameter in inches. On the 2021 Hyundai Trucks Kona, this size belongs to 18-inch-wheel sub-models and carries the most performance-focused product mix of the three primary fitments. Available options are from BFGoodrich in blackwall form across the g-Force Comp 2 AS, g-Force Sport Comp 2, and g-Force Phenom T/A series. It is the size to evaluate when the vehicle already has the larger factory-style wheel package and the goal is to stay with that overall fitment approach.
205/60R16 is a modern metric radial size where 205 is the nominal section width in millimeters, 60 is the aspect ratio, R marks radial construction, and 16 indicates a 16-inch rim. This size serves the 16-inch-wheel Kona configuration and has a different character from the larger-wheel fitments because the available product is an American Classic radial with a 1.50-inch wide whitewall and asymmetrical tread series. That makes it a distinctive appearance choice rather than a typical late-model crossover blackwall selection. It is worth checking carefully against the vehicle’s current wheel setup and intended look before moving forward.
215/55R17 is a modern metric radial size with a 215-millimeter nominal section width, a 55-series profile, radial construction, and a 17-inch rim diameter. On the 2021 Hyundai Trucks Kona, this size belongs to 17-inch-wheel sub-models and sits between the 16-inch and 18-inch fitments in wheel diameter and product character. Available choices come from BFGoodrich in blackwall form, including the g-Force Comp 2 AS and g-Force Phenom T/A series. This is the size to confirm when the Kona has 17-inch wheels and the buyer wants to compare radial product options within the correct factory-style fitment range.
Tire fitment for the 2021 Hyundai Trucks Kona varies by sub-model, so trim identification matters before any product comparison begins. Each covered sub-model uses one primary radial size, but those sizes are split across 16-inch, 17-inch, and 18-inch wheel packages.
1
2021 Hyundai Trucks Kona Limited
The 2021 Hyundai Trucks Kona Limited uses the 235/45R18 radial fitment, placing it in the 18-inch wheel group. That means the tire decision centers on comparing the available blackwall BFGoodrich series while confirming that the vehicle still carries the correct 18-inch wheel setup.
The 2021 Hyundai Trucks Kona Night Edition also uses the 235/45R18 radial size on an 18-inch rim. Tire selection here is mainly about choosing among the available blackwall performance-oriented series and making sure the wheel package has not been changed from this original fitment type.
The 2021 Hyundai Trucks Kona SE uses the 205/60R16 radial fitment on a 16-inch wheel. This sub-model stands apart because the available product in this size carries a wide whitewall presentation, so wheel confirmation and appearance goals both matter before selecting a replacement.
The 2021 Hyundai Trucks Kona SEL uses the 215/55R17 radial tire size with a 17-inch wheel. Tire choice for this sub-model comes down to staying with the correct 17-inch fitment while comparing the available blackwall BFGoodrich series for the desired balance of style and use.
The 2021 Hyundai Trucks Kona SEL Plus shares the 215/55R17 radial fitment used on the 17-inch-wheel setup. That keeps the size question straightforward, leaving the buyer to compare the available blackwall tire series and verify that the vehicle still has its matching wheel diameter.
The 2021 Hyundai Trucks Kona Ultimate uses the 235/45R18 radial fitment, matching the Kona’s 18-inch-wheel configuration. The practical decision is not size crossover, but which of the available blackwall BFGoodrich series best suits the vehicle’s current wheel setup and intended road use.
The tire sizes listed on this page assume factory-standard vehicle configuration. The following modifications may affect tire fitment and are not reflected in this guide:
Suspension changes (lowering, lift kits, spring replacements)
Body alterations (fender modifications, custom bodywork)
If your vehicle has been modified from factory specifications, verify tire clearance before purchase.
Best 2021 Hyundai Trucks Kona Tires for Sale
Available 2021 Hyundai Trucks Kona tires vary by size, brand, and presentation. The 17-inch and 18-inch fitments center on BFGoodrich blackwall g-Force series tires, while 205/60R16 is represented by an American Classic radial with a wide whitewall and asymmetrical tread styling.
Common 2021 Hyundai Trucks Kona tire questions usually come down to trim-specific size, wheel diameter, radial selection, sidewall style, and what to inspect before putting the vehicle back into regular road use.
Tire Size & Fitment
What tire size fits a 2021 Hyundai Trucks Kona?
A 2021 Hyundai Trucks Kona can use one of three primary tire sizes: 205/60R16, 215/55R17, or 235/45R18. All are radial fitments, and the correct size depends on the sub-model and its matching wheel diameter rather than on the Kona name alone.
The most important next step is to confirm the trim and the actual wheel on the vehicle. A Kona SE uses 205/60R16, SEL and SEL Plus use 215/55R17, and Limited, Night Edition, and Ultimate use 235/45R18. If wheels have ever been changed, the tire should be matched to the wheel diameter and overall vehicle clearance rather than to the badge alone.
What size rim does a 2021 Hyundai Trucks Kona use?
The 2021 Hyundai Trucks Kona uses three rim diameters depending on sub-model: 16-inch, 17-inch, and 18-inch. The 205/60R16 fitment uses a 16-inch rim, 215/55R17 uses a 17-inch rim, and 235/45R18 uses an 18-inch rim.
Rim diameter needs to be confirmed before shopping because none of these tire sizes cross over from one wheel diameter to another. The wheel itself should also be checked for actual width, especially if it is aftermarket, since available products in these sizes have their own approved rim-width ranges. That step helps avoid ordering the right size for the wrong wheel.
Do all 2021 Hyundai Trucks Kona sub-models use the same tire size?
No. The 2021 Hyundai Trucks Kona has sub-model-specific tire fitment. SE uses 205/60R16, SEL and SEL Plus use 215/55R17, and Limited, Night Edition, and Ultimate use 235/45R18.
That split means trim identification is part of basic tire fitment on this vehicle. Even when two sizes look close in overall proportions, the rim diameters are different, so the correct choice starts with the exact sub-model and current wheel package. Checking the sidewall on the existing tire and measuring the wheel diameter can help confirm the right starting point before comparing brands or tire series.
Choosing the Right Tire
What should I consider when choosing a 2021 Hyundai Trucks Kona tire?
Start with the correct size for the specific Kona sub-model, then compare construction, wheel compatibility, and the type of tire offered in that size. This vehicle uses radial tires throughout, but the product mix differs noticeably between 16-inch, 17-inch, and 18-inch applications.
After size is confirmed, focus on how the tire will be used and how the vehicle is set up today. The 17-inch and 18-inch fitments center on blackwall BFGoodrich g-Force series tires, while 205/60R16 brings a wide whitewall American Classic option. Rim-width range, load figures where stated, and the Kona’s actual wheel package all deserve a careful look before deciding.
What sidewall styles are available for 2021 Hyundai Trucks Kona tires?
Two sidewall styles appear across the available 2021 Hyundai Trucks Kona tire choices: blackwall and wide whitewall. Blackwall is used on the BFGoodrich 215/55R17 and 235/45R18 options, while the 205/60R16 American Classic radial is offered with a 1.50-inch wide whitewall.
That sidewall split makes appearance a real part of the buying decision on this vehicle. A blackwall presentation aligns with the 17-inch and 18-inch offerings, while the 16-inch wide whitewall creates a much more specialized visual effect. The best approach is to confirm the exact tire size first, then decide whether the available sidewall treatment matches the Kona’s intended look.
What brands offer tires for the 2021 Hyundai Trucks Kona?
Tires for the 2021 Hyundai Trucks Kona are available here from BFGoodrich and American Classic. BFGoodrich covers the 215/55R17 and 235/45R18 fitments, while American Classic appears in 205/60R16.
Brand choice is tied closely to tire size on this vehicle, so comparing brands starts with confirming the correct fitment. The BFGoodrich selections focus on g-Force series blackwall radials, while the American Classic option brings an asymmetrical tread radial with a wide whitewall. That means the size, wheel diameter, and visual direction of the vehicle all influence which brand choices are actually relevant.
Restoration & Appearance
Which tire should I choose for a period-style 2021 Hyundai Trucks Kona?
A period-style approach on a 2021 Hyundai Trucks Kona begins with keeping the correct size for the exact sub-model and wheel diameter. Since this is a modern radial-fitment vehicle, the strongest appearance distinction in the available choices is not bias-ply versus radial, but blackwall versus wide whitewall presentation.
The most visually distinctive option is the 205/60R16 American Classic radial with a 1.50-inch wide whitewall, but that size belongs to the Kona SE 16-inch setup. The 17-inch and 18-inch fitments stay in blackwall BFGoodrich g-Force territory. Anyone pursuing exact-as-delivered authenticity should still compare against vehicle-specific documentation and the wheel package currently on the car.
How does tire construction affect the appearance of a restored 2021 Hyundai Trucks Kona?
On a 2021 Hyundai Trucks Kona, construction does not create the main appearance difference because all primary fitments here are radial. The visual character comes more from the tire size, sidewall treatment, and series styling than from choosing between radial and bias-ply construction.
That makes wheel diameter and sidewall style the details to watch most closely. A 16-inch Kona SE with a wide whitewall radial gives a very different impression from a 17-inch or 18-inch Kona wearing blackwall g-Force tires. Staying with the correct size for the sub-model is the first step, then the buyer can decide how conservative or distinctive the finished look should be.
Fitment, Maintenance & Road Use
Can modifications affect tire fitment on a 2021 Hyundai Trucks Kona?
Yes. Modifications can affect tire fitment on a 2021 Hyundai Trucks Kona even when the tire size itself is correct for the original sub-model. Aftermarket wheels, offset changes, suspension alterations, or body modifications can change how a 205/60R16, 215/55R17, or 235/45R18 tire sits and clears.
A Kona with changed wheels should be checked for actual rim diameter and width before replacement tires are chosen. Steering clearance, fender clearance, and the relationship between the tire and suspension hardware all matter once the factory setup has been altered. That is especially important when replacing only two tires or when the vehicle no longer carries its original wheel package.
What should I inspect before driving a 2021 Hyundai Trucks Kona on new tires?
Before driving a 2021 Hyundai Trucks Kona on new tires, inspect the wheels for damage, confirm the correct tire size for the sub-model, and make sure the wheel diameter matches the tire. Tire pressure, valve stems, lug hardware, and visible clearance around the strut, fender, and inner wheelhouse also deserve attention.
A short road test is a good way to confirm that the vehicle tracks normally and that there is no rubbing at full steering lock or over suspension movement. It also helps to recheck inflation after the initial drive and keep an eye on any unusual vibration. On a vehicle with prior wheel changes, that early inspection is especially worthwhile.
How often should tires on a 2021 Hyundai Trucks Kona be inspected?
Tires on a 2021 Hyundai Trucks Kona should be inspected regularly rather than only when tread looks low. Pressure loss, sidewall damage, uneven wear, punctures, and impact damage from road hazards can all develop before they become obvious from a distance.
A quick visual check before longer drives and a more careful inspection at service intervals is a sensible routine. The sidewalls should be checked for cuts, bulges, and weathering, while the tread should be watched for irregular wear that could point to alignment or suspension issues. Any Kona that sits for extended periods also benefits from pressure checks before returning to normal road use.
