The 2020 Toyota Trucks C-HR sits in the modern compact crossover category, with sharp styling and a road-focused character that makes tire choice more than a routine replacement decision. On this model, fitment depends on trim level, with 215/60R17 radial tires used on the LE and 225/50R18 radial tires used on the Limited and XLE. That means the first step is confirming the exact sub-model and wheel diameter before comparing options. Buyers looking at the 18-inch fitment will find blackwall BFGoodrich choices across several g-Force series, while any replacement decision should still account for wheel compatibility, intended driving use, and the vehicle's present setup.
Which Tire Size Is Right for The 2020 Toyota Trucks C-HR
The 2020 Toyota Trucks C-HR uses two primary tire sizes, and they are tied directly to sub-model and wheel diameter. The LE uses a 17-inch radial fitment, while the Limited and XLE use an 18-inch radial fitment, so the first thing to confirm is which trim and wheel package is actually on the vehicle. Once that is settled, the decision shifts to selecting the right tire within the correct size and wheel range.
A 215/60R17 tire uses a 215-millimeter section width, a 60-series aspect ratio, radial construction, and a 17-inch rim diameter. On the 2020 Toyota Trucks C-HR, this is the primary fitment for the LE and represents the smaller of the two wheel-and-tire packages used across the model line. Its role is straightforward: match the size to the correct trim and keep the wheel diameter consistent. This size should be chosen only after confirming that the vehicle still carries the 17-inch wheel setup rather than an 18-inch trim-level or aftermarket change.
A 225/50R18 tire uses a 225-millimeter section width, a 50-series aspect ratio, radial construction, and an 18-inch rim diameter. This size applies to the 2020 Toyota Trucks C-HR Limited and XLE, where the larger wheel package becomes the key fitment point. Available products in this size include blackwall BFGoodrich options from the g-Force Comp 2 AS, g-Force Sport Comp 2, and g-Force Phenom T/A series. It is the right size to evaluate when the vehicle is equipped with the factory-style 18-inch setup or another wheel package that preserves the same diameter and compatibility range.
Tire fitment on the 2020 Toyota Trucks C-HR varies by sub-model, so trim identification matters before anything else. The LE uses a different wheel and tire size than the Limited and XLE, making wheel diameter confirmation just as important as reading the sidewall.
1
2020 Toyota Trucks C-HR LE
The 2020 Toyota Trucks C-HR LE uses the 215/60R17 radial fitment, giving it the 17-inch wheel package within this model range. Tire selection here starts with staying in that size and confirming that the vehicle has not been changed to a different wheel diameter since new.
The 2020 Toyota Trucks C-HR Limited uses the 225/50R18 radial fitment and shares that sizing approach with the XLE. That makes the buying decision less about choosing between primary sizes and more about comparing available 18-inch tire options that suit the vehicle's current wheels and intended use.
The 2020 Toyota Trucks C-HR XLE also uses the 225/50R18 radial fitment on an 18-inch wheel. For this sub-model, the main task is selecting among the available tires in that exact size while checking wheel width, overall condition, and any modifications that could affect clearance.
The tire sizes listed on this page assume factory-standard vehicle configuration. The following modifications may affect tire fitment and are not reflected in this guide:
Suspension changes (lowering, lift kits, spring replacements)
Body alterations (fender modifications, custom bodywork)
If your vehicle has been modified from factory specifications, verify tire clearance before purchase.
Best 2020 Toyota Trucks C-HR Tires for Sale
Available product choices center on the 225/50R18 fitment, with BFGoodrich blackwall radial options offered across the g-Force Comp 2 AS, g-Force Sport Comp 2, and g-Force Phenom T/A series. Those choices give buyers a useful comparison point for series, rim-width compatibility, load specification, and overall tire character.
Owners of a 2020 Toyota Trucks C-HR usually need to sort out trim-specific tire size, 17-inch versus 18-inch wheel fitment, and how to compare available radial choices. The questions below focus on size, sub-model differences, product selection, and practical checks before road use.
Tire Size & Fitment
What tire size fits a 2020 Toyota Trucks C-HR?
The 2020 Toyota Trucks C-HR uses two primary tire sizes: 215/60R17 and 225/50R18. The 215/60R17 size applies to the LE, while the Limited and XLE use 225/50R18. Both are radial tire fitments, but they are not interchangeable as primary fitments because they are tied to different wheel diameters.
The practical first step is confirming the exact trim and the wheels currently on the vehicle. A C-HR that has changed hands may have aftermarket wheels or a swap from another trim, so the sidewall marking and actual rim diameter should match before choosing a replacement tire.
What size rim does a 2020 Toyota Trucks C-HR use?
A 2020 Toyota Trucks C-HR uses either a 17-inch or 18-inch rim, depending on sub-model. The LE uses a 17-inch fitment with 215/60R17 tires, while the Limited and XLE use an 18-inch fitment with 225/50R18 tires. Rim diameter is built into the tire size, so it must match exactly.
Checking rim diameter matters before any other tire decision, because a 17-inch tire cannot be mounted on an 18-inch wheel and vice versa. It also helps to confirm wheel width and the present wheel setup if the vehicle has been modified, since those details affect which replacement tires make sense.
Do all 2020 Toyota Trucks C-HR sub-models use the same tire size?
No, the 2020 Toyota Trucks C-HR does not use the same tire size across all covered sub-models. The LE uses 215/60R17, while the Limited and XLE use 225/50R18. That split also means the vehicle uses two different rim diameters across the model line: 17 inches and 18 inches.
That difference makes trim identification important whenever tires are being replaced. Looking only at the model name is not enough, especially if the vehicle has replacement wheels or a mixed set from a previous owner. Matching the tire size to the actual wheel diameter is the safest way to start.
Choosing the Right Tire
What should I consider when choosing a tire for a 2020 Toyota Trucks C-HR?
Start with the correct primary size for the vehicle's trim and wheel diameter. A 2020 Toyota Trucks C-HR LE uses 215/60R17, while the Limited and XLE use 225/50R18, so the right tire begins with matching the exact size already required by the wheel package on the vehicle.
From there, compare construction, rim-width compatibility, load specification where stated, and the type of driving the C-HR sees most often. It also helps to check whether the vehicle remains stock, because aftermarket wheels, suspension changes, or previous tire substitutions can influence which option makes the most sense.
What sidewall styles are available for 2020 Toyota Trucks C-HR tires?
For the available 225/50R18 fitment choices, the sidewall style is blackwall. That gives the 18-inch C-HR fitment a clean modern appearance rather than a restoration-oriented or specialty sidewall treatment. No alternate sidewall presentation appears among the currently available products in that size.
Since sidewall style is not the main dividing line here, buyers will get more value from comparing tire series, load specification where available, and wheel-width compatibility. On a modern crossover like the C-HR, that approach usually matters more than appearance differences when sorting through otherwise similar radial options.
What tire series are available for the 2020 Toyota Trucks C-HR?
The available 225/50R18 products for the 2020 Toyota Trucks C-HR include BFGoodrich options from the g-Force Comp 2 AS, g-Force Sport Comp 2, and g-Force Phenom T/A series. All are blackwall radial tires in the same basic fitment size, but they represent distinct product lines within the BFGoodrich range.
That means the comparison is less about changing size and more about deciding which series best matches the vehicle's use and wheel setup. Looking at rim-width compatibility, stated load figure where included, and the current condition of the wheels can help narrow the choice without stepping outside correct fitment.
Fitment, Maintenance & Road Use
Can modifications affect tire fitment on a 2020 Toyota Trucks C-HR?
Yes, modifications can affect tire fitment on a 2020 Toyota Trucks C-HR even when the tire size looks close to stock. Aftermarket wheels, changes in wheel width, suspension lowering, or body alterations can all change the clearance relationship between the tire, fender, strut area, and steering components.
A modified C-HR should be checked at full steering lock and through normal suspension travel before settling on a replacement tire. Wheel diameter also needs special attention, since this model uses both 17-inch and 18-inch factory-type fitments depending on trim, and that difference shapes the entire tire choice.
What should I inspect before driving a 2020 Toyota Trucks C-HR on new tires?
Before road use, inspect the wheel condition, valve stems, inflation pressure, and the basic mounted-tire clearances at the front and rear. It is also worth checking that the installed tire size matches the vehicle's actual wheel diameter and trim-level fitment, especially on a C-HR that may have replacement wheels.
A short test drive should be followed by another quick look for rubbing, unusual vibration, or signs of air loss. Tire selection is only part of the picture, so alignment condition, suspension wear, and any preexisting wheel damage should be addressed if the vehicle does not feel settled on the road.
How often should tires on a 2020 Toyota Trucks C-HR be inspected?
Tires on a 2020 Toyota Trucks C-HR should be inspected regularly rather than only when tread looks low. Pressure loss, sidewall damage, uneven wear, punctures, and aging can all develop before a problem is obvious from a quick glance, and crossover vehicles depend on a stable tire setup for everyday road manners.
Monthly pressure and condition checks are a sensible routine, with a closer inspection before longer trips or seasonal driving changes. It also helps to recheck sooner after any impact, wheel change, alignment issue, or suspension work, because those events can alter how the tire sits and wears on the vehicle.
