The 2020 Rolls-Royce Wraith sits at the grand touring end of the modern luxury coupe spectrum, blending imposing presence with high-speed road manners and a distinctly hand-finished character. Tire selection on a Wraith is less about finding a single universal size and more about confirming the wheel diameter and front-to-rear staggered setup on the car. This application uses radial construction with 20-inch and 21-inch fitments, pairing 255-section front tires with wider 285-section rear tires. Available choices in the 20-inch front size include blackwall, redline, and raised white letter presentations across several performance-oriented series. Before choosing, verify whether the car is on its current factory-diameter wheels or a changed wheel package.
Which Tire Size Is Right for The 2020 Rolls-Royce Wraith
The 2020 Rolls-Royce Wraith uses four primary tire sizes because fitment is staggered front to rear and also split between 20-inch and 21-inch wheel diameters. The first step is confirming whether the car has 20-inch or 21-inch wheels, then matching the correct front and rear sizes for that setup. Once the wheel diameter is confirmed, the decision shifts to choosing the right radial tire style and product character within the correct size.
Fit(s): Base Front, Black Badge Front, and Eagle VIII Front
Construction: Radial|Rim: 21 in
255/40R21 is a metric radial size in which 255 identifies the nominal section width in millimeters, 40 is the aspect ratio, R designates radial construction, and 21 is the wheel diameter in inches. On the 2020 Rolls-Royce Wraith, this size serves as a front fitment in the 21-inch staggered setup, so it needs to be matched with the corresponding 21-inch rear size rather than chosen in isolation. Its lower-profile format reflects the larger-wheel package used on the car. Selecting it starts with verifying that the Wraith is actually on 21-inch front wheels and that clearance remains consistent with the present setup.
Fit(s): Base Front, Black Badge Front, and Eagle VIII Front
Construction: Radial|Rim: 20 in
255/45R20 is a metric radial size with a 255-millimeter nominal section width, a 45-series aspect ratio, radial construction, and a 20-inch rim diameter. On the 2020 Rolls-Royce Wraith, this is the front tire size for the 20-inch staggered arrangement, and it is available in several product directions including BFGoodrich, Nitto, and Pro-Trac offerings. Sidewall choices include blackwall, redline, and raised white letter, with series such as g-Force Comp 2 AS, g-Force Sport Comp 2, Nitto NT555 G2, and Street Pro III. This size is the practical focus for owners confirming a 20-inch front fitment and comparing appearance or performance-oriented product styles.
Fit(s): Base Rear, Black Badge Rear, and Eagle VIII Rear
Construction: Radial|Rim: 21 in
285/35R21 is a metric radial size where 285 is the nominal section width in millimeters, 35 is the aspect ratio, R indicates radial construction, and 21 is the wheel diameter in inches. On the 2020 Rolls-Royce Wraith, this size belongs on the rear of the 21-inch staggered setup, giving the car a wider rear tire than its corresponding front fitment. Its role is specific to that 21-inch package, so it should be considered as part of the matched front-and-rear combination rather than as a standalone choice. Before selecting it, confirm rear wheel diameter and make sure the car has not been altered from its intended wheel arrangement.
Fit(s): Base Rear, Black Badge Rear, and Eagle VIII Rear
Construction: Radial|Rim: 20 in
285/40R20 is a metric radial size that uses a 285-millimeter nominal section width, a 40-series aspect ratio, radial construction, and a 20-inch rim diameter. For the 2020 Rolls-Royce Wraith, this is the rear tire size in the 20-inch staggered configuration, paired with the narrower 255/45R20 front tire. The wider rear fitment is part of the car's intended front-to-rear sizing relationship, so wheel diameter and axle position both matter when replacing tires. Choosing this size correctly means confirming that the Wraith is using the 20-inch package and keeping the proper rear application in place.
Fitment is consistent across the covered Wraith sub-models, but each version still uses a staggered front-and-rear arrangement and either a 20-inch or 21-inch wheel package. Checking the exact front or rear position matters just as much as confirming the sub-model name, because the front and rear tire sizes are not interchangeable.
1
2020 Rolls-Royce Wraith Base Front
The 2020 Rolls-Royce Wraith Base Front uses the narrower front tire fitment in either a 20-inch or 21-inch radial size, depending on the wheel package on the car. Tire selection here starts with confirming wheel diameter, then choosing a front tire that matches the existing staggered setup and intended appearance.
The 2020 Rolls-Royce Wraith Base Rear uses the wider rear tire fitment, again split between 20-inch and 21-inch radial applications. That means the rear tires should be chosen with axle position and wheel diameter in mind, rather than assuming the front and rear of the car share one universal size.
The 2020 Rolls-Royce Wraith Black Badge Front follows the same front fitment pattern, using one of two radial front sizes based on whether the car has 20-inch or 21-inch wheels. The practical step is confirming the wheel package first, then selecting a front tire that preserves the proper staggered relationship with the rear.
The 2020 Rolls-Royce Wraith Black Badge Rear uses the corresponding wider rear radial size for either the 20-inch or 21-inch setup. Tire choice here should stay tied to the actual rear wheel diameter on the car, especially if the Wraith has seen wheel changes or replacement wheels over time.
The 2020 Rolls-Royce Wraith Eagle VIII Front uses the same front tire fitment approach, with one radial size for 20-inch wheels and another for 21-inch wheels. Selecting the right tire depends on confirming the present wheel diameter and keeping the proper front size matched to the rear package.
The 2020 Rolls-Royce Wraith Eagle VIII Rear carries the wider rear fitment in either 20-inch or 21-inch radial form. For tire selection, that means verifying the rear wheel size and maintaining the intended staggered layout instead of treating the car as a square four-tire setup.
The tire sizes listed on this page assume factory-standard vehicle configuration. The following modifications may affect tire fitment and are not reflected in this guide:
Suspension changes (lowering, lift kits, spring replacements)
Body alterations (fender modifications, custom bodywork)
If your vehicle has been modified from factory specifications, verify tire clearance before purchase.
Best 2020 Rolls-Royce Wraith Tires for Sale
Available product choices center on the 255/45R20 front size, with radial options from BFGoodrich, Nitto, and Pro-Trac. Buyers can compare blackwall, redline, and raised white letter sidewalls along with series differences such as g-Force Comp 2 AS, g-Force Sport Comp 2, Nitto NT555 G2, and Street Pro III.
Common Wraith tire questions center on the staggered front-and-rear sizing, 20-inch versus 21-inch wheel packages, radial tire selection, sidewall appearance, and the checks worth making before regular road use or after wheel changes.
Tire Size & Fitment
What tire size fits a 2020 Rolls-Royce Wraith?
The 2020 Rolls-Royce Wraith does not use one universal tire size. It uses a staggered setup with 255/45R20 front and 285/40R20 rear for the 20-inch package, or 255/40R21 front and 285/35R21 rear for the 21-inch package. All of these are radial sizes.
The key is confirming both axle position and wheel diameter before ordering tires. A front Wraith tire is narrower than the rear, and a 20-inch setup should stay matched as a set just like a 21-inch setup. If the car has replacement wheels, check the wheel markings and existing tire sizes rather than relying only on model name.
What size rim does a 2020 Rolls-Royce Wraith use?
A 2020 Rolls-Royce Wraith uses either 20-inch or 21-inch rims, depending on the wheel package on the car. The front fitments are 255/45R20 or 255/40R21, while the rear fitments are 285/40R20 or 285/35R21, so both axle position and rim diameter must line up correctly.
That means the rim size cannot be checked by front or rear tire width alone. A 255 front tire could be mounted on a 20-inch or 21-inch wheel, and the same is true of the wider 285 rear tire. Looking at the actual tire sidewall and wheel stampings is the safest way to confirm what the car currently uses.
Do all 2020 Rolls-Royce Wraith sub-models use the same tire size?
Base, Black Badge, and Eagle VIII versions follow the same fitment pattern, but not a single shared tire size across the whole car. Each uses front and rear staggered sizes, with one pair for 20-inch wheels and another pair for 21-inch wheels. Front and rear positions remain different on every version covered here.
That makes sub-model identification helpful, but wheel diameter and axle position still matter more when choosing tires. A Wraith owner should verify whether the car is on the 20-inch or 21-inch package first, then match the correct front and rear pair. Treating the car like it uses four identical tires can lead to the wrong selection.
Choosing the Right Tire
What should I consider when choosing a 255/45R20 tire for a 2020 Rolls-Royce Wraith?
Start with the basics: 255/45R20 is a front radial size for the 20-inch Wraith setup, so it should be chosen only for that wheel diameter and axle position. After that, compare the available tire series, sidewall style, rim-width suitability, weight, and any stated load figures that may matter to your intended use.
The available choices in this size include blackwall, redline, and raised white letter presentations, so appearance can change as much as construction details. It also helps to confirm whether the car remains on its original-style wheel arrangement or has been modified. Matching the front tire to the rear 20-inch setup keeps the staggered layout intact.
What sidewall styles are available for 2020 Rolls-Royce Wraith tires?
In the available 255/45R20 fitment choices for the 2020 Rolls-Royce Wraith, sidewall styles include blackwall, redline, and RWL. RWL means raised white letter. Those options give the same size a very different visual character, from understated blackwall presentation to a more pronounced period-inspired custom look.
Sidewall style should be chosen with the car's overall appearance in mind rather than as a fitment shortcut. The size, wheel diameter, and front or rear position still have to be correct first. Once those basics are settled, sidewall treatment becomes a useful way to lean toward a more discreet luxury look or a more distinctive enthusiast-oriented presentation.
What brands offer tires for the 2020 Rolls-Royce Wraith?
Available product choices for the 2020 Rolls-Royce Wraith include BFGoodrich, Nitto, and Pro-Trac in the 255/45R20 front size. Those options span several radial series, including g-Force Comp 2 AS, g-Force Sport Comp 2, Nitto NT555 G2, and Street Pro III, with differences in sidewall styling and product character.
Brand choice should come after confirming the correct size and wheel diameter for the car. Once the fitment is settled, compare the tire series, sidewall treatment, and any useful construction details that match how the Wraith is driven and presented. There is no universal brand answer for every car; the right choice depends on setup and preferences.
Restoration & Appearance
Which tire should I choose for a period-style 2020 Rolls-Royce Wraith?
A period-style choice for a 2020 Rolls-Royce Wraith starts with keeping the correct staggered radial sizes for the car's actual 20-inch or 21-inch wheel package. On the available 255/45R20 front fitment, sidewall presentation can shape the look significantly, with blackwall, redline, and raised white letter options creating very different visual results.
For a restrained grand touring appearance, many owners lean toward a cleaner sidewall treatment, while a more expressive look may point toward redline or raised white letter styling. Exact originality questions are more specific than size alone, so buyers focused on showroom-accurate presentation should compare their car against marque references and trim-specific visual documentation.
How does tire construction affect the appearance of a restored 2020 Rolls-Royce Wraith?
On the 2020 Rolls-Royce Wraith, the primary fitments are radial tires, so construction choice is not a bias-ply-versus-radial restoration issue in the traditional collector-car sense. Appearance changes come more from wheel diameter, profile, and sidewall treatment, especially on the 20-inch front size where blackwall, redline, and raised white letter options are available.
That means a Wraith's visual presentation is shaped by how understated or how expressive the tire sidewall looks once the correct fitment is in place. Keeping the proper front-to-rear stagger matters visually as well as mechanically. A mismatched axle setup or the wrong wheel diameter can alter the car's stance more noticeably than brand choice alone.
Fitment, Maintenance & Road Use
Can modifications affect tire fitment on a 2020 Rolls-Royce Wraith?
Yes. Wheel changes, altered offsets, suspension modifications, or lowering can all affect tire fitment on a 2020 Rolls-Royce Wraith, even when the tire size appears close to stock. Because the Wraith uses staggered front and rear sizes and can be equipped with either 20-inch or 21-inch wheels, small setup changes can matter quickly.
A modified car should be checked for wheel diameter, wheel width, tire clearance at full steering lock, and room around the fenders and suspension. Owners should also confirm that the front and rear sizes still match the intended staggered layout. Assuming that any 255 front or 285 rear tire will work can create preventable clearance or compatibility problems.
What should I inspect before driving a 2020 Rolls-Royce Wraith on new tires?
Before road use, inspect the tires for correct size by axle position, proper mounting direction where applicable, visible bead seating, and stable inflation. It also makes sense to check the wheels for damage and confirm that the car is wearing a matched 20-inch or matched 21-inch staggered setup rather than an accidental mix.
A short initial drive should be followed by another look at pressure, sidewall condition, and any signs of rubbing. Pay attention to steering feel and clearance as the suspension settles over normal road surfaces. On a grand touring coupe like the Wraith, quiet operation and smooth behavior are good indicators that the tire and wheel setup has been installed correctly.
How often should tires on a 2020 Rolls-Royce Wraith be inspected?
Tires on a 2020 Rolls-Royce Wraith should be inspected regularly, especially if the car sees seasonal use or long periods of storage. Look at tread wear, pressure retention, sidewall cracking, cuts, bulges, and any uneven wear pattern that could point to alignment or suspension issues. Staggered setups deserve extra attention because front and rear tires do different jobs.
A quick visual check before driving and a more careful inspection at regular service intervals is a sensible routine. Cars that sit for extended periods should also have their tires checked for age-related deterioration and flat spotting. Keeping inflation correct and moving the car periodically can help preserve ride quality and reduce surprises when road use resumes.
