The 2020 Nissan Trucks Rogue sits in the modern compact crossover class, where comfort, daily drivability, and all-season practicality matter just as much as clean fitment. For owners keeping one on the road, tire selection is less about vintage-style construction and more about matching the exact wheel package the vehicle carries. This Rogue uses radial tires in three primary sizes: 225/65R17, 225/60R18, and 225/55R19, depending on sub-model. That makes wheel diameter and trim identification the first step, especially since the available choices can differ sharply by size. A careful match keeps the vehicle's stance, clearance, and road manners aligned with its intended setup.
Which Tire Size Is Right for The 2020 Nissan Trucks Rogue
Three tire sizes apply to the 2020 Nissan Trucks Rogue, and they are tied to different sub-model and wheel combinations rather than interchangeable versions of the same fitment. The first thing to confirm is the exact sub-model and wheel diameter on the vehicle, since this Rogue uses 17-inch, 18-inch, and 19-inch rim packages. Once that is settled, the decision shifts to selecting the right radial tire within the correct size.
225/65R17 is a metric radial size in which 225 identifies the section width in millimeters, 65 is the aspect ratio, R denotes radial construction, and 17 is the rim diameter in inches. On the 2020 Nissan Trucks Rogue, this size suits the 17-inch wheel fitment used on certain sub-models. Available product choices in this size can include more utility-focused designs, such as the BFGoodrich All-Terrain T/A KO2 with an RBL sidewall treatment. This size is worth evaluating carefully if the vehicle uses the smaller-diameter wheel package and a more rugged tire character is part of the goal.
225/55R19 follows the same metric radial format, with a 225-millimeter section width, a 55-series profile, radial construction, and a 19-inch rim diameter. For the 2020 Nissan Trucks Rogue, this size belongs to the larger 19-inch wheel setup rather than serving as a universal fitment across the model line. Its lower-profile format changes the tire selection conversation because wheel diameter has to match exactly before any product comparison begins. Buyers with this size should focus first on confirming the installed 19-inch wheels, then comparing available tires that match the intended balance of appearance and road use.
225/60R18 is another metric radial size, combining a 225-millimeter section width with a 60-series profile on an 18-inch rim. On the 2020 Nissan Trucks Rogue, this size applies to certain sub-model configurations and should be treated as its own wheel-specific fitment rather than as a substitute for the 17-inch or 19-inch setups. The practical importance here is straightforward: the 18-inch rim diameter must match the wheel already on the vehicle. This size becomes the correct path when the Rogue carries the 18-inch package and the goal is to stay aligned with that original wheel format.
Tire fitment for the 2020 Nissan Trucks Rogue varies by sub-model, so trim identification matters before comparing tires. The key distinction is wheel package, since the covered Rogue sub-models use different rim diameters and not all of them share the same primary size.
1
2020 Nissan Trucks Rogue S
The 2020 Nissan Trucks Rogue S uses the 225/65R17 radial tire size, tying it to the 17-inch wheel package. That makes tire selection fairly direct once the wheel setup is confirmed, with the main focus shifting to choosing the right road-use character within that size.
The 2020 Nissan Trucks Rogue SL uses 225/55R19, placing it on the 19-inch wheel fitment rather than the smaller-diameter Rogue setups. Tire shopping for the SL starts with that wheel confirmation, since the correct size depends on retaining the 19-inch package already on the vehicle.
The 2020 Nissan Trucks Rogue SV appears with either 225/60R18 or 225/65R17, so this sub-model requires an extra check before choosing tires. Looking at the actual wheel diameter on the vehicle is the quickest way to avoid selecting the wrong size for an SV configuration.
The tire sizes listed on this page assume factory-standard vehicle configuration. The following modifications may affect tire fitment and are not reflected in this guide:
Suspension changes (lowering, lift kits, spring replacements)
Body alterations (fender modifications, custom bodywork)
If your vehicle has been modified from factory specifications, verify tire clearance before purchase.
Best 2020 Nissan Trucks Rogue Tires for Sale
Available product coverage within these Rogue sizes is limited, so comparison may center more on the exact size and wheel package than on broad brand or sidewall variety. In 225/65R17, BFGoodrich offers an All-Terrain T/A KO2 option with radial construction, an RBL sidewall, and a 6.0- to 8.0-inch rim-width range.
For a 2020 Nissan Trucks Rogue, the most important questions center on identifying the correct size by sub-model and wheel diameter, then comparing radial tire choices for the way the vehicle is actually used. The topics below also cover rim fitment, product selection, and practical road-use checks.
Tire Size & Fitment
What tire size fits a 2020 Nissan Trucks Rogue?
The 2020 Nissan Trucks Rogue uses three primary tire sizes: 225/65R17, 225/60R18, and 225/55R19. These are all radial tire sizes, and each one corresponds to a specific wheel package rather than a one-size-fits-all fitment across the entire Rogue lineup.
The right choice depends on the exact sub-model and the wheel diameter currently on the vehicle. Rogue S uses 225/65R17, Rogue SL uses 225/55R19, and Rogue SV can use either 225/60R18 or 225/65R17, so checking the trim and the installed wheels before buying tires is the important next step.
What size rim does a 2020 Nissan Trucks Rogue use?
A 2020 Nissan Trucks Rogue can use 17-inch, 18-inch, or 19-inch rims, depending on the sub-model and wheel package. Those rim diameters pair respectively with 225/65R17, 225/60R18, and 225/55R19 tire sizes, all in radial construction.
Rim diameter should be confirmed before anything else because a 17-inch tire cannot be mounted on an 18-inch or 19-inch wheel, and the same goes in reverse. Looking at the tire sidewall or measuring the installed wheel setup helps narrow the correct fitment before comparing tread design, load capacity, or intended road use.
Do all 2020 Nissan Trucks Rogue sub-models use the same tire size?
No, the 2020 Nissan Trucks Rogue sub-models do not all use the same tire size. Rogue S uses 225/65R17, Rogue SL uses 225/55R19, and Rogue SV appears with either 225/60R18 or 225/65R17 depending on the wheel setup.
That variation means trim name alone may not be enough, especially on an SV. Checking the actual tire sidewall and verifying the wheel diameter on the vehicle helps prevent ordering the wrong size, which is especially important when the Rogue has had wheel changes or replacement tires installed at some point in its service life.
Choosing the Right Tire
What should I consider when choosing a tire for a 2020 Nissan Trucks Rogue?
Start with the exact tire size and wheel diameter used on the vehicle, since the 2020 Nissan Trucks Rogue can take 225/65R17, 225/60R18, or 225/55R19 depending on sub-model. Construction is straightforward because these are radial fitments, so the main decision is selecting the right tire within the correct size.
After size is confirmed, compare factors such as tread style, rim-width compatibility, load capacity, sidewall treatment, and how the Rogue is driven. A daily-use crossover may call for a different tire character than a vehicle that sees rougher roads, so matching the product's design to the actual use case matters as much as matching the number on the sidewall.
What brands offer tires for the 2020 Nissan Trucks Rogue?
BFGoodrich is represented among the available tire choices for the 2020 Nissan Trucks Rogue, including a 225/65R17 All-Terrain T/A KO2 option. Brand availability can vary sharply by size, so the choice in one Rogue fitment does not automatically carry over to the others.
That matters because a Rogue owner shopping by brand still has to begin with the correct wheel and tire size. Once the proper fitment is confirmed, brand comparison becomes more meaningful in terms of tire character, sidewall style, and intended use instead of becoming a search across sizes that may not belong on that specific vehicle.
How do I choose between the available 225/65R17 tires for a 2020 Nissan Trucks Rogue?
For a 2020 Nissan Trucks Rogue that uses 225/65R17, the first filter is still basic fitment: correct size, radial construction, and compatibility with the vehicle's 17-inch wheel. From there, product differences such as tire series, sidewall style, maximum load rating, and rim-width range become the meaningful points of comparison.
A 225/65R17 tire with a more rugged tread design can suit buyers who want a more utility-oriented look or driving role, while others may prefer a more road-focused replacement in the same size. Checking the wheel width, the vehicle's actual use, and the tire's specification details helps narrow the right choice without treating all 225/65R17 tires as identical.
Fitment, Maintenance & Road Use
Can modifications affect tire fitment on a 2020 Nissan Trucks Rogue?
Yes, modifications can affect tire fitment on a 2020 Nissan Trucks Rogue even when the tire size looks close on paper. Aftermarket wheels, different wheel widths, suspension changes, or altered ride height can all change how a 225/65R17, 225/60R18, or 225/55R19 tire sits in the wheel opening.
Any Rogue with non-stock wheels or suspension should be checked for actual rim diameter, wheel width, and clearance at the fender and steering components before new tires are chosen. That step becomes especially important on the SV, where more than one original tire size appears, because the correct replacement depends on the setup currently on the vehicle.
What should I inspect before driving a 2020 Nissan Trucks Rogue on new tires?
Before driving a 2020 Nissan Trucks Rogue on new tires, inspect the wheels for the correct diameter, look for damage at the bead seat, and confirm that all four tires match the intended size for the vehicle's setup. Tire pressure should also be set correctly, and the sidewalls and tread should be free from cuts, bulges, or visible defects.
A short recheck after initial road use is a sensible habit, especially if the tires were mounted on wheels that had prior curb damage or corrosion. It also helps to verify lug hardware torque, watch for uneven clearance while turning lock to lock, and make sure the vehicle tracks normally without rubbing or unusual vibration.
What should I check before a longer drive in a 2020 Nissan Trucks Rogue?
Ahead of a longer drive, confirm that the 2020 Nissan Trucks Rogue is running the correct tire size for its wheel package and that the tires hold steady pressure. A close look at tread wear, sidewall condition, and any signs of puncture, cracking, or impact damage is worthwhile before the vehicle spends extended time at highway speed.
Longer trips also make it important to verify that the spare, if carried, is usable and properly inflated. On a Rogue that has seen wheel changes or seasonal tire swaps, checking for even clearance and consistent tire sizing across the axle helps avoid avoidable problems once the vehicle is fully loaded and farther from home.
