The 2020 Hyundai Trucks Santa Fe sits in the modern midsize crossover segment where everyday comfort, family use, and confident road manners matter just as much as styling and trim level. On this Santa Fe, tire fitment is tied closely to the exact sub-model, with three primary radial sizes used across the lineup: 235/65R17, 235/60R18, and 235/55R19. That means the key decision is not vintage construction or bias-ply versus radial, but matching the correct size to the correct trim and wheel diameter. Once that is confirmed, the focus shifts to maintaining the intended overall proportions, preserving clearance, and choosing a replacement that suits how the vehicle is actually driven.
Which Tire Size Is Right for The 2020 Hyundai Trucks Santa Fe
Three tire sizes apply to the 2020 Hyundai Trucks Santa Fe, and they vary by sub-model and wheel diameter. The first step is identifying the exact trim and confirming whether the vehicle is on a 17-inch, 18-inch, or 19-inch rim. All three are radial metric sizes with very similar overall dimensions, so the decision centers on matching the correct fitment to the wheel already on the vehicle.
The 235/55R19 size is a metric radial tire with a 235-millimeter nominal section width, a 55-series aspect ratio, and fitment for a 19-inch rim. On the 2020 Hyundai Trucks Santa Fe, this size is used on certain upper trims and reflects a larger wheel package while staying close in overall diameter to the other Santa Fe fitments. Its lower profile compared with the 17-inch and 18-inch alternatives makes wheel confirmation especially important. This is the size to evaluate when the vehicle already carries the 19-inch wheel setup tied to the appropriate sub-model.
The 235/60R18 size uses the same 235-millimeter nominal width as the other Santa Fe fitments, but pairs it with a 60-series profile on an 18-inch rim. This is a radial construction size used on selected 2020 Hyundai Trucks Santa Fe sub-models, including one trim that may also appear with a 17-inch fitment depending on configuration. Because more than one sub-model uses it, this size often becomes the middle ground in the lineup. It is the right place to focus when the vehicle has factory-style 18-inch wheels and the trim calls for this combination.
The 235/65R17 size is a metric radial with a 235-millimeter nominal width, a 65-series aspect ratio, and a 17-inch rim fitment. Among the 2020 Hyundai Trucks Santa Fe tire sizes, it carries the tallest sidewall profile while remaining very close in overall diameter to the 18-inch and 19-inch alternatives. This size is tied to specific sub-models rather than the full Santa Fe range, so it should not be chosen by year and model alone. It deserves consideration when the vehicle retains its 17-inch wheel package and the trim-level fitment matches this setup.
Tire fitment for the 2020 Hyundai Trucks Santa Fe depends on the exact sub-model, and the lineup does not use one universal size. Checking the trim name and actual wheel diameter matters before selecting a replacement, especially because the SEL appears with more than one fitment.
1
2020 Hyundai Trucks Santa Fe Limited 2.0T
The 2020 Hyundai Trucks Santa Fe Limited 2.0T uses the 235/55R19 radial size. Tire selection here starts with confirming the 19-inch wheel package, then choosing a replacement that preserves the intended profile and clearance of that setup.
The 2020 Hyundai Trucks Santa Fe Limited 2.4L uses the 235/60R18 radial size. That makes the 18-inch rim the key fitment point, followed by choosing a tire that matches the vehicle's existing wheel and trim-specific configuration.
The 2020 Hyundai Trucks Santa Fe SE uses the 235/65R17 radial size. Buyers replacing tires on an SE should confirm that the vehicle still carries its 17-inch wheels, especially if it has changed hands or been updated with aftermarket wheels.
The 2020 Hyundai Trucks Santa Fe SEL can use either 235/60R18 or 235/65R17, so trim name alone is not enough to select a tire. The practical next step is verifying the wheel diameter on the vehicle and matching the tire size to that exact setup.
The 2020 Hyundai Trucks Santa Fe SEL 2.0T uses the 235/55R19 radial size. Replacement selection should begin with the 19-inch wheel fitment, then move to overall condition, intended road use, and matching the existing wheel package correctly.
The tire sizes listed on this page assume factory-standard vehicle configuration. The following modifications may affect tire fitment and are not reflected in this guide:
Suspension changes (lowering, lift kits, spring replacements)
Body alterations (fender modifications, custom bodywork)
If your vehicle has been modified from factory specifications, verify tire clearance before purchase.
Frequently Asked Questions
For the 2020 Hyundai Trucks Santa Fe, the biggest questions center on matching the right tire size to the right sub-model and wheel diameter. The FAQs below cover trim-specific fitment, size meaning, tire selection, appearance considerations, and practical road-use checks.
Tire Size & Fitment
What tire size fits a 2020 Hyundai Trucks Santa Fe?
The 2020 Hyundai Trucks Santa Fe uses three possible tire sizes: 235/65R17, 235/60R18, and 235/55R19. All are radial metric sizes, and the correct one depends on the exact sub-model. SE models use 235/65R17, Limited 2.4L uses 235/60R18, Limited 2.0T and SEL 2.0T use 235/55R19, and SEL models can use either 235/65R17 or 235/60R18.
That makes trim identification and wheel confirmation more important than year and model alone. A Santa Fe that has changed owners may also have had wheel changes, so checking the tire sidewall and actual rim diameter before replacement helps avoid choosing the wrong size for the vehicle's current setup.
What size rim does a 2020 Hyundai Trucks Santa Fe use?
A 2020 Hyundai Trucks Santa Fe can use 17-inch, 18-inch, or 19-inch rims, depending on sub-model. The 235/65R17 tire fits a 17-inch rim, the 235/60R18 fits an 18-inch rim, and the 235/55R19 fits a 19-inch rim. The rim diameter is built into the last number of each tire size.
Rim diameter needs to match the tire size exactly, so this is the first item to verify before shopping. It is also wise to confirm the wheel actually on the vehicle rather than assuming it still has its original setup, especially on SEL models that appear with more than one factory tire fitment.
Why does the 2020 Hyundai Trucks Santa Fe have more than one tire size?
The 2020 Hyundai Trucks Santa Fe has more than one tire size because different sub-models use different wheel packages. The lineup includes 17-inch, 18-inch, and 19-inch rim fitments, paired respectively with 235/65R17, 235/60R18, and 235/55R19 tires. Those sizes stay close in overall diameter while matching the wheel and trim configuration of each version.
That means the correct tire is determined by the specific sub-model and the actual wheels on the vehicle, not by the Santa Fe name alone. On an SEL in particular, checking the installed wheel diameter is essential, since that trim appears with either the 17-inch or 18-inch tire package.
Choosing the Right Tire
What should I consider when choosing a 2020 Hyundai Trucks Santa Fe tire?
Start with the exact tire size already tied to the vehicle's sub-model and wheel diameter. For the 2020 Hyundai Trucks Santa Fe, that means choosing among 235/65R17, 235/60R18, or 235/55R19 rather than treating them as interchangeable. All three are radial metric sizes, so the main selection point is proper fitment rather than construction type.
After confirming size, consider how the Santa Fe is used and whether the wheel setup is still original. A family vehicle used for daily road miles may have different replacement priorities than one driven lightly, but the foundation remains the same: correct size, correct rim diameter, and enough clearance for the vehicle's present wheel and suspension setup.
How do I choose between the available 2020 Hyundai Trucks Santa Fe tire sizes?
The three tire sizes used on the 2020 Hyundai Trucks Santa Fe are not alternative choices for the same wheel. Each one corresponds to a particular rim diameter and trim-level setup, so the right choice is the size that matches the vehicle's existing wheel package. The 17-inch, 18-inch, and 19-inch fitments each use a different metric radial size.
Selection becomes straightforward once the trim and wheel diameter are confirmed. If the Santa Fe has been modified with aftermarket wheels, lowered suspension, or a different wheel-and-tire package, the existing setup should be measured carefully before replacement so the next tire matches the actual vehicle rather than only the badge on the liftgate.
What rim-width specifications should I compare when choosing 2020 Hyundai Trucks Santa Fe tires?
Rim width matters because a tire must be mounted on a wheel that falls within the proper width range for that size and design. On a 2020 Hyundai Trucks Santa Fe, this check is especially important if the vehicle no longer has its original wheels, since the correct tire size still needs a compatible wheel width in addition to the right diameter.
Comparing diameter alone is not enough when a wheel change has been made. A Santa Fe with aftermarket wheels should have both width and offset reviewed along with the tire size, since those factors can affect sidewall shape, steering clearance, and how closely the replacement tire matches the intended fitment on the vehicle.
Restoration & Appearance
Does correct tire fitment matter for a 2020 Hyundai Trucks Santa Fe restoration?
Yes. Even on a modern vehicle such as the 2020 Hyundai Trucks Santa Fe, correct tire fitment matters if the goal is to keep the vehicle visually and mechanically close to its intended configuration. The Santa Fe uses trim-specific radial sizes tied to 17-inch, 18-inch, or 19-inch wheels, so preserving the right combination helps maintain the proper stance and wheel-to-tire relationship.
Appearance and fitment work together here more than sidewall styling or vintage construction. A restoration-minded owner should confirm the exact sub-model, verify the installed wheels, and avoid substituting a different size simply because its overall diameter looks close, since the wrong size can change the vehicle's presentation and wheel fit.
Which tire should I choose for a period-style 2020 Hyundai Trucks Santa Fe?
A period-style choice for a 2020 Hyundai Trucks Santa Fe starts with the exact size used by its sub-model: 235/65R17, 235/60R18, or 235/55R19. Because this is a contemporary crossover, the period-style question is less about bias-ply appearance and more about retaining the wheel-and-tire proportions that suit the vehicle's original trim-level presentation.
The most convincing result usually comes from keeping the proper rim diameter and matching the original-style profile for that setup. Owners seeking a highly exact restoration standard should also compare the vehicle to marque references, original sales materials, or surviving examples so the selected tire complements the intended look of that specific Santa Fe configuration.
Fitment, Maintenance & Road Use
Can modifications affect tire fitment on a 2020 Hyundai Trucks Santa Fe?
Yes. Modifications can change tire fitment on a 2020 Hyundai Trucks Santa Fe even when the replacement tire matches one of the original sizes. Aftermarket wheels, changes in wheel width or offset, lowering, suspension repairs, or body alterations can all influence how a 235/65R17, 235/60R18, or 235/55R19 tire sits and clears the vehicle.
That is why the current setup deserves a quick inspection before ordering replacements. A tire that matches the original trim-level size still needs enough room at the fender, suspension, and steering components on the vehicle as it sits today, especially if its wheels are no longer the factory-style dimensions.
What should I inspect before driving a 2020 Hyundai Trucks Santa Fe on new tires?
Before driving a 2020 Hyundai Trucks Santa Fe on new tires, inspect the wheel condition, valve stems, lug hardware, and the vehicle's existing alignment and suspension condition. Confirm that the installed tire size matches the correct wheel diameter and trim-level fitment. It also helps to make sure there is no rubbing at full steering lock or under normal suspension movement.
A new tire cannot correct problems caused by worn suspension parts, bent wheels, or improper inflation. After installation, monitor air pressure, listen for vibration, and recheck for any unusual contact marks, since small fitment issues tend to show up quickly once the vehicle returns to regular road use.
What should I check before a longer drive in a 2020 Hyundai Trucks Santa Fe?
Before a longer drive, check tire pressure, tread condition, visible cuts or bulges, and any signs of slow air loss on the 2020 Hyundai Trucks Santa Fe. Also verify that all four tires are the correct size for the vehicle's wheel package and that no recent wheel or suspension work has introduced rubbing, vibration, or uneven wear.
Longer highway use tends to expose problems that short local trips may hide. It is smart to inspect the spare if equipped, confirm lug tightness after recent service, and look over the sidewalls for age-related cracking, especially on a Santa Fe that sees seasonal or infrequent use rather than steady daily driving.
