The 2020 Honda Trucks CR-V sits in the modern compact crossover class, where everyday comfort, family use, and year-round drivability matter just as much as styling and trim level. By 2020, the CR-V lineup also included hybrid variants, which makes exact fitment more important than assuming every model uses the same wheel and tire package. This vehicle uses three primary radial tire sizes: 235/65R17, 235/60R18, and 235/55R19, depending on sub-model. That means the real decision starts with confirming trim and wheel diameter, then narrowing the choice to the right metric radial size. Once that is settled, tire selection becomes a matter of matching the CR-V's existing setup and intended road use.
Which Tire Size Is Right for The 2020 Honda Trucks CR-V
The 2020 Honda Trucks CR-V uses three different tire sizes, and the right one depends on the exact sub-model and wheel diameter. All three are metric radial fitments, but they are built around different rim sizes, so the first step is confirming whether the vehicle has 17-inch, 18-inch, or 19-inch wheels before choosing a tire.
A 235/60R18 tire uses a 235-millimeter section width, a 60-series aspect ratio, and radial construction for an 18-inch wheel. On the 2020 Honda Trucks CR-V, this size is part of the primary fitment for several non-Touring and hybrid trims equipped with 18-inch rims. Its modern metric radial format is familiar to current drivers and supports a straightforward replacement search. The key is making sure the CR-V still has its correct 18-inch wheel package, especially if wheels have been changed since new.
A 235/65R17 tire is a metric radial with a 235-millimeter section width, a 65-series profile, and fitment on a 17-inch rim. For the 2020 Honda Trucks CR-V, this size applies to certain trims that use the smaller factory wheel diameter. It remains a mainstream modern sizing format, so the main fitment question is not decoding the size but confirming that the vehicle is still on the proper 17-inch wheels. That matters most on CR-Vs that may have received take-off wheels or aftermarket replacements.
A 235/55R19 tire keeps the same 235-millimeter nominal width but uses a lower 55-series profile on a 19-inch wheel. On the 2020 Honda Trucks CR-V, this size belongs to Touring-level configurations using the largest wheel package in the range. Like the other CR-V fitments here, it is a modern radial size, but it should only be considered for vehicles actually equipped with 19-inch rims. Verifying the wheel diameter first helps avoid treating this as an interchangeable option across the full CR-V lineup.
Tire fitment for the 2020 Honda Trucks CR-V varies by sub-model, so trim identification matters before choosing a replacement tire. The difference is tied directly to wheel diameter, with 17-inch, 18-inch, and 19-inch setups spread across the lineup.
1
2020 Honda Trucks CR-V EX
The 2020 Honda Trucks CR-V EX uses an 18-inch radial tire fitment rather than the 17-inch or 19-inch packages found elsewhere in the lineup. Tire selection starts with keeping the correct 18-inch wheel pairing and then choosing a replacement that matches the vehicle's current wheel setup.
The 2020 Honda Trucks CR-V EX-L shares the 18-inch radial tire setup used on several other trims. That makes the buying decision fairly straightforward as long as the vehicle still has its proper 18-inch wheels and has not been changed to a different rim package.
The 2020 Honda Trucks CR-V Hybrid EX uses the same 18-inch radial tire fitment as several non-hybrid and hybrid trims. For replacement purposes, the important step is confirming that the wheel diameter remains 18 inches before narrowing the choice to the right tire within that size.
The 2020 Honda Trucks CR-V Hybrid EX-L also uses the 18-inch radial tire setup found on several related CR-V trims. Tire choice is mainly about matching that wheel diameter and selecting a replacement suited to the vehicle's actual road use and existing wheel configuration.
The 2020 Honda Trucks CR-V Hybrid LX uses the 17-inch radial fitment rather than the 18-inch or 19-inch packages seen on other trims. That means replacement starts with confirming the smaller wheel diameter, especially on vehicles that may have had wheels swapped after purchase.
The 2020 Honda Trucks CR-V Hybrid Touring uses the 19-inch radial tire package at the top end of the range. Tire selection should stay centered on that 19-inch wheel setup unless the vehicle has been intentionally converted to a different wheel and tire combination.
The 2020 Honda Trucks CR-V LX uses the 17-inch radial tire size shared with the Hybrid LX. For a correct replacement search, the owner should confirm the vehicle still carries its 17-inch wheels rather than assuming all CR-V trims use the same size.
The 2020 Honda Trucks CR-V Touring uses the 19-inch radial fitment shared with the Hybrid Touring. That makes wheel diameter the first thing to verify, since this size is specific to the Touring wheel package and does not apply across the full CR-V lineup.
The tire sizes listed on this page assume factory-standard vehicle configuration. The following modifications may affect tire fitment and are not reflected in this guide:
Suspension changes (lowering, lift kits, spring replacements)
Body alterations (fender modifications, custom bodywork)
If your vehicle has been modified from factory specifications, verify tire clearance before purchase.
Frequently Asked Questions
These FAQs focus on the exact tire sizes used on the 2020 Honda Trucks CR-V, how trim level affects fitment, and what to verify before replacing tires on 17-inch, 18-inch, or 19-inch wheel packages.
Tire Size & Fitment
What tire size fits a 2020 Honda Trucks CR-V?
The 2020 Honda Trucks CR-V uses three tire sizes, depending on sub-model: 235/65R17, 235/60R18, and 235/55R19. All three are radial metric fitments, and each one corresponds to a different wheel diameter within the CR-V lineup.
The practical step is identifying the exact trim and confirming the wheel diameter already on the vehicle. A CR-V LX or Hybrid LX does not use the same tire size as a Touring model, so checking the existing wheel and sidewall marking before replacement helps keep the fitment aligned with the vehicle's setup.
What size rim does a 2020 Honda Trucks CR-V use?
A 2020 Honda Trucks CR-V can use 17-inch, 18-inch, or 19-inch rims, depending on the sub-model. The 235/65R17 size belongs on a 17-inch rim, 235/60R18 belongs on an 18-inch rim, and 235/55R19 belongs on a 19-inch rim.
That makes rim diameter the first fitment checkpoint before ordering tires. Even within the same model year, CR-V trims were not all built around one wheel package, and any vehicle that has had wheels changed should be measured and checked directly rather than matched by model name alone.
Do all 2020 Honda Trucks CR-V sub-models use the same tire size?
No, 2020 Honda Trucks CR-V sub-models do not all use the same tire size. LX and Hybrid LX models use 235/65R17, EX, EX-L, Hybrid EX, and Hybrid EX-L use 235/60R18, while Touring and Hybrid Touring models use 235/55R19.
That split means trim identification is essential before choosing a replacement tire. A CR-V that looks similar from a distance may have a different wheel package, so checking both the sub-model and the current tire sidewall is the safest way to avoid selecting a size meant for another configuration.
Choosing the Right Tire
What should I consider when choosing a tire for a 2020 Honda Trucks CR-V?
Start with the correct tire size for the exact 2020 Honda Trucks CR-V sub-model, since this lineup uses 17-inch, 18-inch, and 19-inch wheel packages. The tire should match the existing wheel diameter and the size already assigned to that trim unless the vehicle has been intentionally reconfigured.
After size is confirmed, compare the tire's intended use against how the CR-V is driven. Daily commuting, highway travel, seasonal conditions, and any wheel changes since new can all influence the best choice, but those decisions only matter after the correct fitment baseline has been established.
How do I choose between the available tires for a 2020 Honda Trucks CR-V?
The first filter is fitment, not brand preference. A 2020 Honda Trucks CR-V owner should narrow the search to 235/65R17, 235/60R18, or 235/55R19 based on the exact trim and wheel diameter, then compare tires within that correct size category.
Once the size is settled, look at practical differences such as road-use priorities, weather expectations, and whether the vehicle remains on its original wheel package. A CR-V with aftermarket wheels or a changed suspension setup may need extra clearance and wheel checks before any replacement tire is selected.
What rim-width specifications should I compare when choosing 2020 Honda Trucks CR-V tires?
Rim width matters because a tire is designed to work within a compatible wheel range, even when the diameter is correct. On a 2020 Honda Trucks CR-V, that check becomes especially important if the vehicle no longer uses its original factory wheels.
A tire can share the right 17-inch, 18-inch, or 19-inch diameter and still be a poor match for the wheel if width is off. Comparing the tire's approved wheel range against the actual wheel on the vehicle helps protect fitment, handling balance, and fender or suspension clearance.
Restoration & Appearance
Does correct tire fitment matter for a 2020 Honda Trucks CR-V restoration or refurbishment?
Yes, correct tire fitment still matters on a 2020 Honda Trucks CR-V even in a light restoration or refurbishment context. Using the proper 235/65R17, 235/60R18, or 235/55R19 size for the correct trim helps preserve the intended wheel-to-tire relationship and overall presentation.
A clean refurbishment can lose its visual balance quickly if the CR-V is fitted with a size meant for another sub-model. Matching the correct rim diameter first, then choosing a tire that suits the vehicle's trim and appearance goals, keeps the finished result more coherent and avoids an obviously mismatched stance.
How does tire size affect the appearance of a 2020 Honda Trucks CR-V?
Tire size affects how the 2020 Honda Trucks CR-V sits on its wheels because each factory fitment is paired with a different rim diameter and profile. The 17-inch, 18-inch, and 19-inch packages each create a distinct visual balance between sidewall height and wheel presence.
That is why the correct trim-based size matters even beyond basic fitment. Choosing a tire meant for a different wheel package can change the CR-V's proportions and make the vehicle look out of step with its intended setup, especially on trims that were built around the larger Touring wheels.
Fitment, Maintenance & Road Use
Can modifications affect tire fitment on a 2020 Honda Trucks CR-V?
Yes, modifications can affect tire fitment on a 2020 Honda Trucks CR-V even when the basic tire size looks close. Aftermarket wheels, changes in wheel width or offset, suspension lowering, and body alterations can all change how much room the tire has during steering and suspension movement.
That means a CR-V that has been modified should be checked as it sits, not only by factory trim. Verifying wheel diameter, wheel width, clearance at full lock, and space around the fenders and suspension helps prevent rubbing issues that may not appear on an unmodified vehicle.
What should I inspect before driving a 2020 Honda Trucks CR-V on new tires?
Before driving a 2020 Honda Trucks CR-V on new tires, inspect the wheel diameter, confirm the installed tire size matches the trim, and check that inflation pressure is set properly. It is also smart to look over the wheels for damage and make sure the tires seat and clear correctly.
A short initial inspection drive can reveal vibration, rubbing, or steering issues before the vehicle is used normally. Rechecking pressure after the first miles and confirming there is no interference at full steering lock helps make sure the CR-V's tire replacement started from a sound baseline.
How often should tires on a 2020 Honda Trucks CR-V be inspected?
Tires on a 2020 Honda Trucks CR-V should be inspected regularly rather than only when a problem appears. A quick visual check for uneven wear, cuts, bulges, embedded objects, and pressure loss is worthwhile throughout normal use, especially because crossover vehicles often see mixed city and highway driving.
More frequent inspection makes sense before longer trips or after striking potholes, curbs, or road debris. Keeping an eye on tread condition and sidewall health also helps catch alignment or suspension issues early, which is important when the CR-V uses one of several trim-specific wheel and tire packages.
