The 2020 Ferrari 812 Superfast sits at the far end of the front-engine grand touring spectrum, combining modern Ferrari design with the kind of speed and road presence that place real demands on its tire setup. On this car, tire selection is not a one-size-fits-all decision front to rear. The 2020 Ferrari 812 Superfast uses staggered radial fitment with 275/35R20 up front and 315/35R20 at the rear, both on 20-inch rims. Available choices include blackwall performance radials as well as select raised white letter and redline treatments in the front size. The right choice starts with preserving the intended staggered layout and confirming wheel compatibility before changing style or series.
Which Tire Size Is Right for The 2020 Ferrari 812 Superfast
The 2020 Ferrari 812 Superfast uses two primary tire sizes, with one size for the front and a wider size for the rear. Both are radial tires on 20-inch rims, so the first step is confirming whether you are replacing a front tire or a rear tire. Once that is settled, the real comparison becomes tire series, sidewall style, and wheel-width compatibility within the correct staggered setup.
275/35R20 is a metric radial size that identifies a 275-millimeter section width, a 35-series profile, radial construction, and fitment on a 20-inch rim. On the 2020 Ferrari 812 Superfast, this is the front tire size, making steering response, wheel compatibility, and proper front-end fitment especially important. Available choices include BFGoodrich, Nitto, and Pro-Trac options, with blackwall, raised white letter, and redline sidewall treatments represented in this size. This is the size to evaluate when replacing front tires and when comparing appearance as well as performance-oriented product lines.
315/35R20 is a metric radial size that uses a substantially wider 315-millimeter section width with a 35-series profile on a 20-inch rim. On the 2020 Ferrari 812 Superfast, this size is used at the rear, where maintaining the intended staggered relationship with the front tire matters. The available product choice in this size centers on a blackwall Nitto NT555 G2 radial, so the decision is more focused on matching the correct rear specification than comparing multiple sidewall styles. This is the size to confirm when replacing rear tires or restoring a balanced front-to-rear setup.
Fitment on the 2020 Ferrari 812 Superfast is straightforward, but it is split by axle position rather than by trim variation. Checking whether the tire is for the front or rear matters because the car uses a staggered setup with different widths at each end.
1
2020 Ferrari 812 Superfast Base Front
The Base Front position uses the 275/35R20 radial size on a 20-inch rim. Tire selection here centers on choosing the correct front fitment first, then comparing available brands, tire series, and sidewall treatments that suit the car's intended look and road use.
The Base Rear position uses the wider 315/35R20 radial size on a 20-inch rim. Rear tire selection is more focused, so the key step is preserving the proper staggered arrangement and confirming the replacement matches the wheel and rear clearance requirements.
The tire sizes listed on this page assume factory-standard vehicle configuration. The following modifications may affect tire fitment and are not reflected in this guide:
Suspension changes (lowering, lift kits, spring replacements)
Body alterations (fender modifications, custom bodywork)
If your vehicle has been modified from factory specifications, verify tire clearance before purchase.
Best 2020 Ferrari 812 Superfast Tires for Sale
Available 2020 Ferrari 812 Superfast tire choices cover the front 275/35R20 and rear 315/35R20 sizes with radial constructions from BFGoodrich, Nitto, and Pro-Trac. Comparisons center on tire series and sidewall presentation, with blackwall options across both sizes and select RWL and redline choices in the front size.
Owners of a 2020 Ferrari 812 Superfast usually need clear answers on staggered tire sizing, 20-inch rim fitment, front-versus-rear replacement, available radial tire choices, and the checks that matter before road use on a high-performance grand touring car.
Tire Size & Fitment
What tire size fits a 2020 Ferrari 812 Superfast?
The 2020 Ferrari 812 Superfast uses a staggered tire setup with 275/35R20 at the front and 315/35R20 at the rear. Both are radial tire sizes designed for 20-inch rims, so the car does not use the same size on all four corners.
That means the first question is whether you are replacing a front tire, a rear tire, or the full set. Mixing up the two sizes can disrupt the intended front-to-rear balance, so wheel position should be confirmed before comparing brands, sidewall styles, or tire series.
What size rim does a 2020 Ferrari 812 Superfast use?
The 2020 Ferrari 812 Superfast uses 20-inch rim diameter tires at both the front and rear. The front size is 275/35R20 and the rear size is 315/35R20, so the rim diameter stays the same even though the tire widths are different.
A shared 20-inch diameter does not mean front and rear tires are interchangeable. Width, profile, and wheel position still matter, and any car with aftermarket wheels should have actual wheel width and clearance checked before a replacement tire is selected.
Why does the 2020 Ferrari 812 Superfast have more than one tire size?
The 2020 Ferrari 812 Superfast has more than one tire size because it uses a staggered setup. The front axle uses 275/35R20 and the rear axle uses the wider 315/35R20, both in radial construction on 20-inch rims.
For the buyer, that makes wheel position the key fitment detail rather than trim level. Front and rear tires should be matched to the correct axle, and any change in wheel width or suspension setup should be checked carefully before moving away from the original staggered arrangement.
Choosing the Right Tire
What should I consider when choosing a 275/35R20 or 315/35R20 tire for a 2020 Ferrari 812 Superfast?
Start with the correct axle position, since the 2020 Ferrari 812 Superfast uses 275/35R20 in front and 315/35R20 in the rear. Both sizes are radial and fit 20-inch rims, but the front and rear are not interchangeable even though they share the same rim diameter.
After size is confirmed, compare the available tire series, sidewall style, and wheel-width suitability within that position. Front tire choices offer more appearance variation, while rear selection is narrower, so the goal is preserving the intended staggered setup while matching the car's actual wheels and use.
What sidewall styles are available for 2020 Ferrari 812 Superfast tires?
Sidewall style depends on size. In 275/35R20, available choices include blackwall, RWL, and redline, while the 315/35R20 rear size is represented by a blackwall tire. That gives the front position the widest appearance range on this fitment.
Appearance changes should still stay secondary to correct sizing and wheel position. A buyer aiming for a more traditional or custom visual effect can focus on the front 275/35R20 offerings, but the rear 315/35R20 needs to remain properly matched to preserve the car's overall stance and balance.
What brands offer tires for the 2020 Ferrari 812 Superfast?
Available tire brands for the 2020 Ferrari 812 Superfast include BFGoodrich, Nitto, and Pro-Trac. Brand choice is broader in the 275/35R20 front size, while the 315/35R20 rear size is represented by Nitto in the currently available radial product selection.
That brand spread makes the front tires the main area for comparing different product families and sidewall presentations. The rear decision is more focused on maintaining the correct 315/35R20 fitment, so selecting by exact size and rear-wheel compatibility matters more than chasing variety.
Restoration & Appearance
Which tire should I choose for a period-style 2020 Ferrari 812 Superfast?
A period-style approach on a 2020 Ferrari 812 Superfast still starts with the correct staggered radial sizes: 275/35R20 in front and 315/35R20 in the rear. From there, the front size offers the most visible appearance choices, including blackwall, raised white letter, and redline treatments.
Because this is a modern high-performance Ferrari, appearance should be balanced against maintaining the intended front-to-rear fitment relationship. The most convincing result usually comes from keeping the correct sizes at each axle, then choosing the sidewall presentation that best suits the owner's visual goals.
How does tire construction affect the appearance of a restored 2020 Ferrari 812 Superfast?
Tire construction is straightforward on the 2020 Ferrari 812 Superfast because the primary fitment is radial at both ends. The visible appearance difference here comes less from bias-ply versus radial and more from sidewall treatment, tire series, and keeping the proper staggered proportions front to rear.
A restored or carefully presented example will usually look most coherent when the 275/35R20 front and 315/35R20 rear sizes remain in place. From there, sidewall style becomes the main visual choice, especially in the front size where blackwall, RWL, and redline options are available.
Fitment, Maintenance & Road Use
Can modifications affect tire fitment on a 2020 Ferrari 812 Superfast?
Yes, modifications can affect tire fitment on a 2020 Ferrari 812 Superfast even when the nominal tire size stays the same. Aftermarket wheels, altered wheel widths, suspension changes, or ride-height adjustments can all change how a 275/35R20 front or 315/35R20 rear tire sits in the car.
That matters because the 812 Superfast uses a staggered layout with little room for guesswork. Any modified car should have wheel dimensions, tire clearance, and steering or suspension travel checked before replacement, especially when moving between different tire series or sidewall styles in the front size.
What should I inspect before driving a 2020 Ferrari 812 Superfast on new tires?
Before driving a 2020 Ferrari 812 Superfast on new tires, inspect basic installation and condition points first. Check that the front 275/35R20 and rear 315/35R20 positions are correct, confirm inflation is set appropriately, and look for any visible issues such as sidewall damage, air loss, or improper bead seating.
A short initial drive should also be used to confirm there is no rubbing, vibration, or clearance problem through normal steering and suspension movement. High-performance cars are especially sensitive to setup details, so wheel hardware, alignment condition, and overall tire condition deserve attention before longer use.
What should I check before a longer drive in a 2020 Ferrari 812 Superfast?
Before a longer drive, confirm the 2020 Ferrari 812 Superfast is wearing the correct staggered tire sizes, with 275/35R20 in front and 315/35R20 in the rear, and inspect each tire for pressure loss, tread issues, cuts, bulges, or age-related deterioration. Collector and exotic cars can sit long enough for condition problems to be overlooked.
A longer trip also makes wheel and suspension condition more important, particularly on a car with low-profile 20-inch radial tires. It is wise to check for even wear, verify that no rubbing occurs at full steering input, and make sure any previous wheel or suspension changes have not affected clearance.
