The 2020 BMW 440i xDrive sits in the later years of BMW’s F32/F33 4 Series lineup, blending turbocharged six-cylinder power, all-wheel-drive confidence, and the sharp grand-touring character that made these cars appealing as both daily drivers and enthusiast machines. Tire selection matters here because this BMW uses a staggered radial setup, with different front and rear sizes and either 18-inch or 19-inch wheel fitments depending on configuration. That puts the focus on confirming wheel diameter and axle position first, then comparing available performance-oriented blackwall choices across the correct sizes. For owners keeping the car stock or sorting out a modified setup, matching the right size to the right wheel is the essential first step.
Which Tire Size Is Right for The 2020 BMW 440i xDrive
The 2020 BMW 440i xDrive uses four primary tire sizes, and the right choice depends on wheel diameter and whether the tire is for the front or rear axle. This is a radial-only fitment with staggered sizing, so the first step is confirming whether the car is on 18-inch or 19-inch wheels and then matching the correct front and rear pair before comparing product options.
Fit(s): Convertible, Convertible Front, Coupe, and Coupe Front
Construction: Radial|Rim: 19 in
225/40R19 is a modern metric radial size: 225 identifies the section width in millimeters, 40 is the aspect ratio, R denotes radial construction, and 19 is the wheel diameter in inches. On the 2020 BMW 440i xDrive, this size serves the front axle on 19-inch wheel setups, where preserving the intended staggered relationship with the rear tire is important. Available choices center on BFGoodrich performance-oriented blackwall tires in g-Force Comp 2 AS and g-Force Phenom T/A series. This size is the right one to evaluate when the car has 19-inch front wheels and the goal is maintaining the proper front fitment profile.
Fit(s): Convertible, Convertible Front, Coupe, and Coupe Front
Construction: Radial|Rim: 18 in
225/45R18 follows the same metric radial format, with a 225-millimeter section width, a 45-series profile, radial construction, and an 18-inch rim diameter. For the 2020 BMW 440i xDrive, it is the front tire size used with the 18-inch staggered setup, so it must be paired with the corresponding rear size rather than selected on its own. Product choices include BFGoodrich and Nitto blackwall radials, with series such as g-Force Comp 2 AS, g-Force Sport Comp 2, g-Force Phenom T/A, and NT555 G2. It is the front size to verify when the car is equipped with 18-inch wheels.
255/35R19 is a wider modern metric radial size, with 255 showing the nominal section width in millimeters, 35 indicating a lower-profile sidewall, R for radial construction, and 19 for the wheel diameter. This size is used at the rear of the 2020 BMW 440i xDrive when the car is equipped with 19-inch wheels, making it part of the factory-style staggered arrangement rather than a universal fitment. BFGoodrich offers this size in blackwall performance series including g-Force Comp 2 AS, g-Force Sport Comp 2, and g-Force Phenom T/A. It is the rear size to confirm when matching a 19-inch front and rear wheel package.
255/40R18 uses the same modern metric radial system, pairing a 255-millimeter section width with a 40-series profile on an 18-inch rim. On the 2020 BMW 440i xDrive, this size belongs on the rear axle with the 18-inch staggered setup, so it should be chosen as part of the correct front-and-rear combination rather than treated as a stand-alone size. Available options include BFGoodrich blackwall radials in g-Force Comp 2 AS, g-Force Sport Comp 2, and g-Force Phenom T/A. This is the rear fitment to check when the car wears 18-inch wheels and stock-style staggered sizing is being retained.
Sub-model fitment on the 2020 BMW 440i xDrive is straightforward in one sense and axle-specific in another. Coupe and Convertible applications follow the same 18-inch or 19-inch staggered front-and-rear sizing pattern, so the key is confirming body style, wheel diameter, and whether the tire position is front or rear.
1
2020 BMW 440i xDrive Convertible
The 2020 BMW 440i xDrive Convertible uses the same front tire sizing pattern as the Coupe, with either an 18-inch or 19-inch front fitment depending on wheel package. Tire selection starts with confirming the installed wheel diameter, then matching the front size to the proper rear companion size.
Front fitment on the 2020 BMW 440i xDrive Convertible is either 225/45R18 or 225/40R19, both in radial construction. That means the buying decision is less about construction type and more about confirming wheel diameter before comparing available performance-oriented blackwall options.
Rear fitment on the 2020 BMW 440i xDrive Convertible is staggered, using either 255/40R18 or 255/35R19. Choosing the correct rear tire means verifying the wheel diameter and keeping the rear size properly matched to the corresponding front setup.
The 2020 BMW 440i xDrive Coupe follows the same staggered sizing approach as the Convertible, with separate front and rear tire sizes in either 18-inch or 19-inch wheel fitments. That makes wheel confirmation especially important before selecting among the available radial performance tires.
Front tires on the 2020 BMW 440i xDrive Coupe are either 225/45R18 or 225/40R19, depending on wheel diameter. Once the wheel size is confirmed, the next step is comparing the available blackwall radial choices within the correct front size.
Rear tire fitment on the 2020 BMW 440i xDrive Coupe uses either 255/40R18 or 255/35R19 as part of a staggered radial setup. The practical takeaway is to match the rear size to the actual rear wheel diameter and keep it paired with the proper front fitment.
The tire sizes listed on this page assume factory-standard vehicle configuration. The following modifications may affect tire fitment and are not reflected in this guide:
Suspension changes (lowering, lift kits, spring replacements)
Body alterations (fender modifications, custom bodywork)
If your vehicle has been modified from factory specifications, verify tire clearance before purchase.
Best 2020 BMW 440i xDrive Tires for Sale
Available 2020 BMW 440i xDrive tire choices focus on modern radial blackwall performance tires from BFGoodrich and Nitto. Across the four correct sizes, the product grid lets you compare series such as g-Force Comp 2 AS, g-Force Sport Comp 2, g-Force Phenom T/A, and NT555 G2, along with rim-width compatibility and load details.
Owners shopping tires for a 2020 BMW 440i xDrive usually need to sort out front versus rear sizing, 18-inch versus 19-inch wheels, and which radial product best suits the car’s intended use. These FAQs focus on exact fitment, product selection, and practical road-use checks.
Tire Size & Fitment
What tire size fits a 2020 BMW 440i xDrive?
The 2020 BMW 440i xDrive uses a staggered radial setup with four primary sizes: 225/45R18 and 255/40R18 for 18-inch wheel packages, or 225/40R19 and 255/35R19 for 19-inch wheel packages. The narrower size is used at the front, and the wider size is used at the rear.
That means the right answer depends on more than the model name alone. Wheel diameter and tire position both matter, so the most reliable approach is to check whether the car has 18-inch or 19-inch wheels and then confirm whether the tire being replaced is on the front or rear axle before choosing a replacement.
What size rim does a 2020 BMW 440i xDrive use?
A 2020 BMW 440i xDrive uses either 18-inch or 19-inch rims, depending on the wheel setup. The tire sizes paired with those diameters are 225/45R18 front and 255/40R18 rear, or 225/40R19 front and 255/35R19 rear.
Rim diameter should be confirmed before anything else because the car does not use one universal wheel size across all configurations. Once diameter is verified, it is also smart to check actual wheel width and axle position, especially if the BMW has aftermarket wheels or a previous owner changed the original wheel package.
Why does the 2020 BMW 440i xDrive have more than one tire size?
The 2020 BMW 440i xDrive has more than one tire size because it uses a staggered fitment and was offered with two wheel diameters. The front axle uses a narrower tire than the rear, and both 18-inch and 19-inch front-and-rear pairings are used on this model.
That layout is common on performance-oriented cars, but it means replacements cannot be chosen by width alone. Matching the correct front size to the correct rear size helps preserve the intended setup, while checking the actual wheels on the car prevents ordering an 18-inch tire for a 19-inch rim or the reverse.
Choosing the Right Tire
What should I consider when choosing a 2020 BMW 440i xDrive tire?
Start with the exact size, axle position, and wheel diameter. A 2020 BMW 440i xDrive can use 225/45R18 and 255/40R18 or 225/40R19 and 255/35R19, so the first step is matching the tire to the installed front or rear wheel.
After size is confirmed, compare construction details that matter for the way the car is used, including rim-width compatibility, load figures when stated, and the character of the available tire series. A daily-driven car may call for a different selection approach than a fair-weather enthusiast car, even within the same correct size.
What sidewall styles are available for 2020 BMW 440i xDrive tires?
The available tires for the 2020 BMW 440i xDrive use a blackwall sidewall style across all four applicable sizes. That gives the car a clean contemporary appearance that suits the modern performance character of the 4 Series without introducing whitewall or vintage-style visual elements.
Since sidewall appearance does not vary here, the real comparison moves to tire series, brand choice, and fitment details such as wheel-width compatibility. For many owners, that simplifies the decision because the visual presentation stays consistent while the product grid highlights the specification differences that matter more on this BMW.
What brands offer tires for the 2020 BMW 440i xDrive?
BFGoodrich and Nitto offer tires in the sizes used on the 2020 BMW 440i xDrive. BFGoodrich appears across all four fitment sizes, while Nitto is available in 225/45R18 through the NT555 G2 series.
Brand alone should not be the only deciding factor. It helps to compare which series each brand offers in the exact front or rear size needed, then check the wheel-width range and any stated load details so the tire matches the actual setup on the car instead of just matching the nominal size code.
What tire series are available for the 2020 BMW 440i xDrive?
Available tire series for the 2020 BMW 440i xDrive include BFGoodrich g-Force Comp 2 AS, g-Force Sport Comp 2, g-Force Phenom T/A, and Nitto NT555 G2. Not every series appears in every size, so the exact selection depends on whether the car uses 18-inch or 19-inch front or rear fitments.
Series names are useful because they help separate the product choices within the same correct size. Once the fitment is narrowed to the actual wheel and axle position, comparing series can make the product grid easier to read and keep the focus on tires that suit the car’s intended driving style.
Restoration & Appearance
Which tire should I choose for a period-style 2020 BMW 440i xDrive?
A period-style approach on a 2020 BMW 440i xDrive usually means staying with the correct staggered metric radial sizes for the wheel package already on the car. Since this BMW is a modern performance coupe or convertible, the visual goal is generally an authentic late-model sport presentation rather than a vintage restoration look.
That keeps the emphasis on proper 18-inch or 19-inch fitment, blackwall appearance, and a tire series that suits the car’s intended use. Owners seeking exact showroom-era presentation should also compare the actual wheel design and overall stance, because tire size alone does not determine how original the finished setup will look.
Does correct tire fitment matter for a 2020 BMW 440i xDrive restoration or preservation project?
Correct tire fitment matters on a 2020 BMW 440i xDrive because the car’s stance and overall presentation depend on keeping the intended staggered front-and-rear sizing relationship. Using the wrong width or rim diameter can change the visual balance of the car as well as complicate wheel and clearance compatibility.
For a preservation-minded car, matching the proper front and rear sizes to the installed 18-inch or 19-inch wheels is the sound starting point. Buyers who want a highly accurate as-delivered appearance should also review BMW-specific historical references and the car’s existing wheel setup rather than relying on size alone.
Fitment, Maintenance & Road Use
Can modifications affect tire fitment on a 2020 BMW 440i xDrive?
Yes, modifications can affect tire fitment on a 2020 BMW 440i xDrive. Aftermarket wheels, altered wheel widths, suspension lowering, spacer changes, or body modifications can all change the way the correct nominal tire size sits on the car, even when the size code itself matches a standard fitment.
That is especially important on a staggered BMW because front and rear sizes already differ. A modified setup should be checked for actual wheel diameter, width, and clearance at full steering lock and suspension travel so the tire choice reflects the car as it sits now, not only its original configuration.
What should I inspect before driving a 2020 BMW 440i xDrive on new tires?
Before driving a 2020 BMW 440i xDrive on new tires, inspect wheel condition, verify that the front and rear sizes are mounted in the correct positions, and check that inflation pressure is set appropriately for the installed tires. It is also worth looking for any visible rubbing, bead seating issues, or unusual sidewall distortion.
A short test drive should be followed by another quick inspection for air loss, contact marks, or vibrations. Since this car can use either 18-inch or 19-inch staggered fitments, confirming that each tire matches the correct wheel and axle position helps avoid problems that may not be obvious at first glance.
What should I check before a longer drive in a 2020 BMW 440i xDrive?
Before a longer drive, check tread condition, visible cuts or bulges, and inflation pressure on all four tires. On a 2020 BMW 440i xDrive, it also makes sense to confirm that the front and rear tires remain properly matched to the car’s staggered setup and that all wheel hardware is secure.
Longer highway use puts more importance on consistency across the set, so uneven wear or a mismatch in wheel diameter becomes more noticeable. A quick walk-around for sidewall damage, a pressure check when the tires are cold, and a look for any recent suspension or alignment issues can prevent trouble later in the trip.
