The 2020 BMW 440i sits near the end of BMW's F32 and F33 4 Series run, combining modern grand-touring refinement with the strong straight-six character that makes these cars appealing as both daily drivers and enthusiast machines. Tire choice matters because this car uses a staggered radial setup, with different front and rear sizes and either 18-inch or 19-inch wheel packages depending on configuration. That means the real decision is not just size, but matching the correct front and rear pair, wheel diameter, and product series. Available choices center on blackwall performance radials from BFGoodrich and Nitto, so appearance stays modern while fitment accuracy and handling balance remain the priority.
Which Tire Size Is Right for The 2020 BMW 440i
The 2020 BMW 440i uses four primary tire sizes because fitment is split by wheel package and by front versus rear position. Front tires are either 225/45R18 or 225/40R19, while rear tires are either 255/40R18 or 255/35R19. Before choosing a tire, confirm whether the car is on 18-inch or 19-inch wheels and make sure the correct staggered front and rear sizes stay paired together.
Fit(s): Convertible, Convertible Front, Coupe, and Coupe Front
Construction: Radial|Rim: 19 in
225/40R19 is a metric radial size in which 225 refers to nominal section width in millimeters, 40 is the aspect ratio, R identifies radial construction, and 19 is the wheel diameter in inches. On the 2020 BMW 440i, this is a front fitment used with the 19-inch staggered setup rather than a stand-alone all-around size. Available choices are blackwall radials from BFGoodrich in the g-Force Comp 2 AS and g-Force Phenom T/A series. This size is the right place to start when the car already wears 19-inch front wheels and the goal is to preserve the intended front-to-rear fitment balance.
Fit(s): Convertible, Convertible Front, Coupe, and Coupe Front
Construction: Radial|Rim: 18 in
225/45R18 is a metric radial size that denotes a 225-millimeter nominal section width, a 45-series profile, radial construction, and an 18-inch rim. For the 2020 BMW 440i, it serves as the front tire size on the 18-inch staggered arrangement, paired with a wider rear tire rather than used at all four corners. Product choices include blackwall performance radials from BFGoodrich and Nitto across the g-Force Comp 2 AS, g-Force Sport Comp 2, g-Force Phenom T/A, and NT555 G2 lines. This size suits owners confirming an 18-inch front wheel package and comparing series, rim-width compatibility, and intended street use.
255/35R19 is a metric radial size where 255 represents nominal section width in millimeters, 35 is the aspect ratio, R means radial, and 19 identifies wheel diameter. On the 2020 BMW 440i, this is the rear tire size for the 19-inch staggered setup, giving the car a wider rear footprint than the front. BFGoodrich offers this size in blackwall form through the g-Force Comp 2 AS, g-Force Sport Comp 2, and g-Force Phenom T/A series. This is the size to evaluate when matching a 19-inch rear wheel package and keeping the correct staggered relationship with 225/40R19 fronts.
255/40R18 is a metric radial size that combines a 255-millimeter nominal section width with a 40-series profile on an 18-inch wheel. For the 2020 BMW 440i, it is the rear component of the 18-inch staggered setup, paired with 225/45R18 front tires rather than used as a universal fitment. Available blackwall choices from BFGoodrich include the g-Force Comp 2 AS, g-Force Sport Comp 2, and g-Force Phenom T/A series. This size matters most when the car has 18-inch rear wheels and the owner wants to preserve the intended front-to-rear width relationship and wheel compatibility.
Sub-model fitment on the 2020 BMW 440i is straightforward once front and rear positions are separated. Coupe and Convertible versions share the same staggered sizing pattern, so the key step is confirming whether the car is using the 18-inch or 19-inch wheel package.
1
2020 BMW 440i Convertible
The 2020 BMW 440i Convertible uses the same front tire sizing pattern as the Coupe, with a choice tied to either the 18-inch or 19-inch wheel package. Tire selection starts with wheel diameter, then continues by matching the correct rear size so the staggered setup remains consistent.
The front of the 2020 BMW 440i Convertible uses the narrower half of the staggered setup, with one size for 18-inch wheels and another for 19-inch wheels. Choosing the right front tire means confirming wheel diameter first, then comparing blackwall radial options within the correct series and rim-width range.
The rear of the 2020 BMW 440i Convertible uses the wider half of the staggered arrangement, again split between 18-inch and 19-inch wheel packages. Rear tire selection should stay paired to the matching front size so the car retains the intended fitment relationship and wheel compatibility.
The 2020 BMW 440i Coupe follows the same staggered tire layout as the Convertible, with front and rear sizes determined by 18-inch or 19-inch wheels. The main choice is confirming which wheel package is on the car before comparing radial tire series and rear-pairing requirements.
The front of the 2020 BMW 440i Coupe uses one of two narrower radial sizes depending on whether the car has 18-inch or 19-inch wheels. Tire selection here should focus on the correct wheel diameter first, then on choosing a compatible blackwall performance radial that matches the rear setup.
The rear of the 2020 BMW 440i Coupe carries the wider radial size in the staggered layout, with separate fitments for 18-inch and 19-inch wheels. Keeping the proper rear size matters because it needs to complement the corresponding front tire and the actual wheel package on the car.
The tire sizes listed on this page assume factory-standard vehicle configuration. The following modifications may affect tire fitment and are not reflected in this guide:
Suspension changes (lowering, lift kits, spring replacements)
Body alterations (fender modifications, custom bodywork)
If your vehicle has been modified from factory specifications, verify tire clearance before purchase.
Best 2020 BMW 440i Tires for Sale
Available 2020 BMW 440i tire choices focus on blackwall performance radials in the correct staggered 18-inch and 19-inch sizes. BFGoodrich supplies several g-Force series, while Nitto appears in 225/45R18, giving buyers useful comparisons in tire series, rim-width compatibility, and load specifications.
Owners shopping tires for a 2020 BMW 440i usually need to sort out front versus rear sizing, 18-inch versus 19-inch wheels, and the practical differences between the available blackwall radial options. The questions below focus on exact fitment, tire selection, wheel compatibility, and road-use checks.
Tire Size & Fitment
What tire size fits a 2020 BMW 440i?
The 2020 BMW 440i uses a staggered radial tire setup with four primary sizes across its wheel packages. Front fitment is 225/45R18 or 225/40R19, and rear fitment is 255/40R18 or 255/35R19. The 18-inch pair stays together, and the 19-inch pair stays together.
The important step is confirming both wheel diameter and axle position before selecting tires. A front 225 size and a rear 255 size are not interchangeable, and mixing an 18-inch tire with a 19-inch wheel is not possible. If the car has been modified or fitted with different wheels, check the actual wheel setup on the vehicle before ordering.
What size rim does a 2020 BMW 440i use?
A 2020 BMW 440i uses either 18-inch or 19-inch rims, depending on the wheel package on the car. The 225/45R18 and 255/40R18 tires belong on 18-inch wheels, while the 225/40R19 and 255/35R19 tires belong on 19-inch wheels.
Wheel diameter is the first fitment checkpoint because it determines which tire family the car can use. After that, confirm whether the wheel is on the front or rear axle, since the 440i uses narrower front tires and wider rear tires. Looking at the wheel itself or the tire sidewall is usually the quickest way to verify what is already installed.
Do all 2020 BMW 440i sub-models use the same tire size?
Coupe and Convertible versions of the 2020 BMW 440i share the same overall sizing pattern, but they do not use one single tire size across the whole car. Both use a staggered setup with one front size and one rear size, and each can be equipped with either an 18-inch or 19-inch wheel package.
That means sub-model name alone is not enough to choose a tire. The actual decision comes down to front versus rear position and whether the car is on 18-inch or 19-inch wheels. Matching the proper front and rear pair helps preserve the intended fitment balance and avoids selecting a tire that belongs to the opposite axle.
Choosing the Right Tire
What should I consider when choosing a 2020 BMW 440i tire?
Start with the exact size, wheel diameter, and axle position. A 2020 BMW 440i uses narrower front tires and wider rear tires, so the correct choice depends on whether the car is using the 18-inch pair or the 19-inch pair, along with the specific front or rear tire size.
Once fitment is confirmed, compare construction, tire series, rim-width compatibility, and load specifications where those details are listed. All of the available options here are radial blackwall tires, so the main differences are within the performance-oriented product lines. Keeping the front and rear pairing consistent matters more than choosing tires by appearance alone.
What brands offer tires for the 2020 BMW 440i?
BFGoodrich appears across all four primary 2020 BMW 440i sizes, while Nitto is available in 225/45R18. Within the BFGoodrich range, the size coverage includes several g-Force series, giving the 440i owner more than one product path inside the correct front and rear fitments.
Brand choice should come after the size and wheel package are confirmed. A useful comparison point is whether the product is offered in the exact front or rear size needed, along with the tire series and rim-width specification. On a staggered car like the 440i, it also helps to think in matched axle pairs rather than choosing each tire in isolation.
What tire series are available for the 2020 BMW 440i?
The 2020 BMW 440i is served by several modern radial tire series, including BFGoodrich g-Force Comp 2 AS, g-Force Sport Comp 2, g-Force Phenom T/A, and Nitto NT555 G2 in 225/45R18. All of these are blackwall radials aimed at modern road use rather than vintage-style presentation.
Series choice becomes meaningful after confirming the correct size on the correct axle. The available lines differ in product family and fitment details such as approved rim-width range, and some sizes have a broader selection than others. Comparing the tire series within the needed front or rear size is the best way to narrow the choices sensibly.
Fitment, Maintenance & Road Use
Can modifications affect tire fitment on a 2020 BMW 440i?
Yes. Wheel changes, altered offsets, lowered suspension, spacers, or non-stock alignment settings can all affect tire fitment on a 2020 BMW 440i, especially because the car uses a staggered setup with different front and rear widths. Even when the tire size is correct on paper, the complete wheel-and-suspension package still matters.
A modified car should be checked for wheel diameter, wheel width, clearance at full steering lock, and clearance under suspension movement before tire selection is finalized. The wider rear fitments deserve the same attention around inner and outer clearance. Using the factory-size pattern is a strong starting point, but the actual hardware on the car always has the final say.
What should I inspect before driving a 2020 BMW 440i on new tires?
Before driving, inspect tire pressure, wheel lug torque, sidewall condition, tread area, and valve stems, then confirm that the correct front and rear sizes are mounted in the proper positions. On a 2020 BMW 440i, it also helps to look closely at wheel condition so a bent or damaged rim does not undermine a new tire installation.
A short initial road test can reveal vibration, rubbing, or steering issues that need attention before normal use. Checking alignment and balancing is worthwhile if the previous tires wore unevenly. Because this BMW uses a staggered arrangement, take a moment to verify that the narrower 225 tire is on the front axle and the wider 255 tire is on the rear.
What should I check before a longer drive in a 2020 BMW 440i?
Before a longer drive, make sure the 2020 BMW 440i's tires are properly inflated, free from cuts or bulges, and wearing evenly across the tread. Confirm that the car is on a matched 18-inch or 19-inch front-and-rear combination and that there is no sign of rubbing, vibration, or persistent air loss.
Longer trips put more emphasis on stability and heat control, so it is worth checking wheel condition, recent alignment history, and the general age and condition of the tires already on the car. Cars that spend time parked should also be inspected for flat-spotting or sidewall weathering. A few minutes of pre-trip inspection can prevent chasing avoidable fitment or tire-condition problems later.
