The 2020 Audi TTS Quattro belongs to a modern era of compact performance coupes that blend sharp all-wheel-drive capability with a highly tuned, road-focused character. Buyers usually arrive here already knowing the car rewards precision, and tire choice plays a major role in preserving that feel. This model uses radial fitments in two sizes, 245/35R19 and 255/30R20, so the first step is confirming which wheel package is on the car. For the 19-inch setup, available choices center on Blackwall performance radials from BFGoodrich and Nitto across distinct series. The right selection comes down to matching the actual wheel diameter and keeping the tire’s profile aligned with the car’s handling and clearance needs.
Which Tire Size Is Right for The 2020 Audi TTS Quattro
The 2020 Audi TTS Quattro uses two primary tire sizes, and both are radial fitments tied to different wheel diameters. Since the Base sub-model can use either 245/35R19 or 255/30R20, the first step is confirming whether the car is running 19-inch or 20-inch wheels before comparing tire options, profile, or product selection.
245/35R19 is a metric radial size in which 245 identifies the nominal section width in millimeters, 35 is the aspect ratio, R indicates radial construction, and 19 is the wheel diameter in inches. On the 2020 Audi TTS Quattro, this size supports the car’s modern low-profile performance setup on a 19-inch rim. Available options include Blackwall radials from BFGoodrich and Nitto in series such as g-Force Comp 2 AS, g-Force Phenom T/A, and NT555 G2. This size is the right place to start when the car is equipped with the 19-inch wheel package and you want to compare performance-oriented choices within that fitment.
255/30R20 is a metric radial size where 255 is the nominal section width in millimeters, 30 is the aspect ratio, R denotes radial construction, and 20 identifies the wheel diameter in inches. For the 2020 Audi TTS Quattro, this is the lower-profile 20-inch fitment and should be matched carefully to the actual wheel on the car. The key practical point with this size is wheel confirmation first, since a 20-inch tire cannot be used on a 19-inch rim. Choose this fitment only after verifying the car’s wheel package and checking that the current setup has not been altered from stock diameter or clearance.
Sub-model fitment is straightforward here because the 2020 Audi TTS Quattro Base is the covered configuration, but tire choice still depends on wheel package. Since this sub-model can use either 19-inch or 20-inch fitment, confirming the actual wheel diameter matters before selecting a tire.
1
2020 Audi TTS Quattro Base
The 2020 Audi TTS Quattro Base can use either of the model’s radial tire sizes, depending on whether the car is equipped with 19-inch or 20-inch wheels. Tire selection starts with wheel confirmation, then moves to choosing the right performance radial within that exact size and profile.
The tire sizes listed on this page assume factory-standard vehicle configuration. The following modifications may affect tire fitment and are not reflected in this guide:
Suspension changes (lowering, lift kits, spring replacements)
Body alterations (fender modifications, custom bodywork)
If your vehicle has been modified from factory specifications, verify tire clearance before purchase.
Best 2020 Audi TTS Quattro Tires for Sale
Available 245/35R19 choices focus on Blackwall radial performance tires from BFGoodrich and Nitto. The product grid is most useful for comparing tire series, construction details, and rim-width compatibility within the 19-inch fitment.
Common questions for the 2020 Audi TTS Quattro center on identifying the correct wheel-based tire size, understanding metric radial fitment, comparing available performance tire series, and checking wheel, suspension, and tire condition before regular road use.
Tire Size & Fitment
What tire size fits a 2020 Audi TTS Quattro?
The 2020 Audi TTS Quattro uses two primary tire sizes: 245/35R19 and 255/30R20. Both are radial metric fitments, and the correct one depends on which wheel package is on the car rather than a different model family or unrelated trim.
The practical step is checking the wheel diameter already on the vehicle before choosing a tire. A 19-inch tire and a 20-inch tire are not interchangeable, so the sidewall marking on the current tire and the actual wheel size should match before comparing brands, series, or performance-focused options.
What size rim does a 2020 Audi TTS Quattro use?
A 2020 Audi TTS Quattro uses either a 19-inch or 20-inch rim, depending on the tire size fitted to the car. The 245/35R19 fitment uses a 19-inch rim, while the 255/30R20 fitment uses a 20-inch rim.
That rim diameter is the first fitment point to verify because the tire must match the wheel exactly. Once diameter is confirmed, it is also worth checking wheel width, especially if the car has aftermarket wheels, since proper wheel dimensions affect tire shape, clearance, and the way the vehicle responds on the road.
Why does the 2020 Audi TTS Quattro have more than one tire size?
The 2020 Audi TTS Quattro has more than one tire size because this model can be equipped with different wheel diameters. The two fitments, 245/35R19 and 255/30R20, are both radial sizes and reflect different wheel-and-tire packages rather than conflicting specifications.
That means the correct choice is not made by year and model alone. Checking the exact wheel setup on the car is more important than assuming one size applies to every TTS Quattro, especially if wheels have been changed or if the car was purchased used with a setup that may differ from its original configuration.
Choosing the Right Tire
What should I consider when choosing a 245/35R19 tire for a 2020 Audi TTS Quattro?
Start with the correct size, radial construction, and 19-inch wheel requirement. From there, the main selection factors are tire series, brand, Blackwall appearance, and wheel-width compatibility, since available 245/35R19 options for the 2020 Audi TTS Quattro include BFGoodrich and Nitto performance-oriented radials.
The best comparison is between how each tire matches the car’s actual use and wheel setup. A TTS driven primarily on the street may call for a different emphasis than one used more aggressively, so it helps to compare series character, load figures where shown, and whether the wheel falls within the stated rim-width range.
What sidewall styles are available for 2020 Audi TTS Quattro tires?
The available 245/35R19 products for the 2020 Audi TTS Quattro use a Blackwall sidewall style. That keeps the look clean and contemporary, which suits the car’s modern performance character without introducing a vintage or restoration-oriented sidewall treatment.
Sidewall style is mostly an appearance decision once the size and wheel diameter are correct, but it still helps narrow the product search. On a car like the TTS Quattro, the bigger differentiators are usually tire series, construction details, and wheel compatibility rather than visual sidewall variation.
What brands offer tires for the 2020 Audi TTS Quattro?
The available 245/35R19 fitment includes tires from BFGoodrich and Nitto. Within that size, BFGoodrich appears in more than one series, including g-Force Comp 2 AS and g-Force Phenom T/A, while Nitto offers the NT555 G2.
Brand alone should not decide the purchase on a vehicle this sensitive to tire choice. It makes more sense to compare the exact tire series, confirm the 19-inch fitment, and review wheel-width compatibility so the selected tire matches the car’s current setup and the way it will actually be driven.
Restoration & Appearance
Which tire should I choose for a period-style 2020 Audi TTS Quattro?
A period-style approach on a 2020 Audi TTS Quattro is less about vintage presentation and more about preserving the car’s original modern performance character. That means staying with the correct radial size for the wheel package already on the car, either 245/35R19 or 255/30R20.
Appearance still matters, but the visual goal is usually a clean, properly proportioned low-profile tire rather than a heritage sidewall treatment. Keeping the correct size and profile helps the car retain the stance and balance intended for its wheel package, while any departure should be checked carefully for wheel and clearance compatibility.
Does correct tire fitment matter for a 2020 Audi TTS Quattro restoration?
Correct tire fitment matters on a 2020 Audi TTS Quattro because the wheel diameter and tire profile are a visible part of the car’s overall presentation. Using the proper 19-inch or 20-inch fitment keeps the proportions consistent with the setup the car was designed to carry.
For an owner trying to return the car to a more original-looking configuration, tire size should be confirmed alongside the wheels themselves. Exact originality questions are best settled with vehicle-specific records or marque expertise, but staying within the proper fitment family is the foundation for both appearance and functional compatibility.
Fitment, Maintenance & Road Use
Can modifications affect tire fitment on a 2020 Audi TTS Quattro?
Yes, modifications can affect tire fitment on a 2020 Audi TTS Quattro. Changes such as aftermarket wheels, altered wheel width, suspension lowering, or body and alignment adjustments can all influence whether a given tire size has proper clearance and maintains the intended fit on the car.
That matters even when the tire size sounds correct on paper. A car with non-stock wheels should have wheel diameter, width, and surrounding clearance checked before tire selection, since steering travel, suspension movement, and fender space can all change once the original setup has been altered.
What should I inspect before driving a 2020 Audi TTS Quattro on new tires?
Before driving a 2020 Audi TTS Quattro on new tires, inspect the wheels for correct diameter and condition, confirm proper inflation, and make sure the tires clear the suspension and bodywork through normal steering and movement. It is also wise to check for any alignment or wear issues that could shorten tire life.
A quick inspection after installation can prevent small fitment problems from becoming expensive ones. Pay attention to rubbing marks, uneven stance, vibration, or rapid pressure loss, especially if the car has been modified or sat unused, since tire condition alone does not guarantee the surrounding chassis setup is ready for road use.
How often should tires on a 2020 Audi TTS Quattro be inspected?
Tires on a 2020 Audi TTS Quattro should be inspected regularly, not just when replacement time arrives. Frequent checks for air pressure, tread wear, cuts, bulges, and sidewall damage are especially important on low-profile performance tires because small issues can affect ride quality, handling response, and long-term tire life.
Inspection should also become part of any pre-drive routine if the car is used occasionally or stored for stretches. Looking over the tires before longer trips, after seasonal storage, or following impacts with potholes and road debris helps catch problems early and confirms the wheel-and-tire package is still operating as intended.
