The 2020 Audi Trucks RS Q8 sits at the high-performance end of the modern luxury SUV world, blending aggressive styling, all-wheel-drive capability, and serious road presence with the stance of a large sport utility vehicle. For tire selection, that matters because this exact model uses wide modern radial fitments in either 295/35R23 or 295/40R22, depending on the wheel setup on the vehicle. Both sizes deliver a similarly substantial footprint, but they are tied to different rim diameters. The real decision starts with confirming whether the RS Q8 has 22-inch or 23-inch wheels, then comparing tire construction details, wheel compatibility, and the intended balance of appearance and road use.
Which Tire Size Is Right for The 2020 Audi Trucks RS Q8
Two tire sizes apply to the 2020 Audi Trucks RS Q8, and the difference starts with wheel diameter rather than a change from bias-ply to radial, since both are modern radial fitments. Before choosing a tire, the first step is confirming whether the vehicle is running 22-inch or 23-inch wheels, because that determines whether 295/40R22 or 295/35R23 is the correct size for the setup on the vehicle.
295/35R23 is a modern metric radial size in which 295 is the nominal section width in millimeters, 35 is the aspect ratio, R identifies radial construction, and 23 is the rim diameter in inches. On the 2020 Audi Trucks RS Q8, this size belongs to a large-diameter wheel setup and keeps the vehicle in a contemporary ultra-performance sizing format. Its wide section and low profile make wheel confirmation especially important. This is the size to evaluate if the vehicle is equipped with 23-inch wheels and you want to stay with the intended wheel diameter and tire profile relationship.
295/40R22 is also a modern metric radial size, using the same 295-millimeter nominal section width but pairing it with a 40-series profile and a 22-inch rim diameter. For the 2020 Audi Trucks RS Q8, it represents the alternate factory-size format tied to a different wheel diameter rather than a different construction type. Compared with the 23-inch fitment, the key distinction is wheel size first. This is the size to consider when the vehicle is running 22-inch wheels and you want to match the tire to that specific rim diameter and overall setup.
Tire fitment is straightforward across the covered 2020 Audi Trucks RS Q8 sub-models because both use the same two radial tire sizes. The important step is not trim identification alone, but confirming whether the vehicle has 22-inch or 23-inch wheels before selecting tires.
1
2020 Audi Trucks RS Q8 Base
The 2020 Audi Trucks RS Q8 Base uses the same two radial fitments found across this model range, with tire choice determined by wheel diameter. Tire selection comes down to verifying whether the vehicle is on 22-inch or 23-inch wheels, then matching the tire size to that setup.
The 2020 Audi Trucks RS Q8 w/Ceramic Brake Pkg. also uses the same two radial tire sizes as the standard RS Q8 coverage here. That means the practical fitment check is still the wheel package on the vehicle, since the correct tire depends on whether it is fitted with 22-inch or 23-inch rims.
The tire sizes listed on this page assume factory-standard vehicle configuration. The following modifications may affect tire fitment and are not reflected in this guide:
Suspension changes (lowering, lift kits, spring replacements)
Body alterations (fender modifications, custom bodywork)
If your vehicle has been modified from factory specifications, verify tire clearance before purchase.
Frequently Asked Questions
Tire questions for the 2020 Audi Trucks RS Q8 usually center on the two correct sizes, the difference between the 22-inch and 23-inch wheel setups, and the fitment checks that matter before replacing tires on a high-performance SUV.
Tire Size & Fitment
What tire size fits a 2020 Audi Trucks RS Q8?
The 2020 Audi Trucks RS Q8 uses two radial tire sizes: 295/35R23 and 295/40R22. Both are modern metric radial fitments with the same nominal section width, but they are built for different wheel diameters, so the correct choice depends on the wheel setup on the vehicle.
The practical step is to confirm whether the RS Q8 has 22-inch or 23-inch wheels before ordering tires. Since these sizes are tied to different rim diameters, selecting by vehicle badge alone is not enough on its own. Checking the tire sidewall and the wheel itself helps avoid a mismatch.
What size rim does a 2020 Audi Trucks RS Q8 use?
A 2020 Audi Trucks RS Q8 uses either a 22-inch rim or a 23-inch rim, depending on the tire size fitted to the vehicle. The 295/40R22 size matches a 22-inch rim, while the 295/35R23 size matches a 23-inch rim.
That makes rim diameter the first fitment point to verify before replacing tires. Two tires can look similar in overall presence yet still be built for different wheel diameters, and neither should be mounted on the wrong rim. Looking at the existing sidewall markings is usually the quickest confirmation.
Do all 2020 Audi Trucks RS Q8 sub-models use the same tire size?
The covered 2020 Audi Trucks RS Q8 sub-models share the same two tire sizes rather than using separate fitments by trim. Both the Base model and the w/Ceramic Brake Pkg. version use 295/35R23 and 295/40R22 radial sizes, with actual tire selection determined by the wheels on the vehicle.
That means the sub-model name is less important than confirming the wheel package actually installed. A buyer should still check the current tire sidewall and wheel diameter before purchasing, especially if the vehicle has had wheels changed or if more than one original wheel setup was offered on the model.
Choosing the Right Tire
What should I consider when choosing a 295/35R23 tire for a 2020 Audi Trucks RS Q8?
For a 2020 Audi Trucks RS Q8 running 23-inch wheels, the first requirement is staying with the correct 295/35R23 radial size. This is a low-profile modern metric fitment, so the key considerations are correct wheel diameter, matching the tire to the wheel setup already on the vehicle, and preserving the intended size relationship.
Selection should also account for how the SUV is used and whether the vehicle remains on its original-style wheel package. On a performance-oriented SUV like the RS Q8, it is wise to check wheel condition, confirm the existing size on all four corners, and inspect for any suspension or wheel changes before replacement.
What should I consider when choosing a 295/40R22 tire for a 2020 Audi Trucks RS Q8?
Choosing a 295/40R22 tire for a 2020 Audi Trucks RS Q8 starts with confirming that the vehicle is equipped with 22-inch wheels. The size uses the same nominal width as the 23-inch option but pairs it with a different sidewall profile and rim diameter, so it should be matched to the wheel setup already in place.
A careful buyer should compare the replacement tire against the tire currently on the vehicle and make sure all four wheels share the same diameter. It also helps to inspect the wheel width and overall condition, since large-diameter performance SUV wheels need the correct tire pairing for proper fitment and clearance.
How do I choose between the available tire sizes for a 2020 Audi Trucks RS Q8?
The choice between tire sizes on a 2020 Audi Trucks RS Q8 is not a matter of preference alone, because 295/35R23 and 295/40R22 are each tied to a different rim diameter. The correct size is whichever matches the wheel package installed on the vehicle, with both sizes using radial construction.
That makes wheel confirmation more important than comparing the two sizes as alternatives. Check the sidewall on the current tires, verify the diameter stamped or known for the wheels, and make sure the vehicle has not been changed to a different aftermarket setup. Once that is established, tire shopping becomes much more straightforward.
Restoration & Appearance
Does correct tire fitment matter for a 2020 Audi Trucks RS Q8 restoration or refurbishment?
Correct tire fitment still matters on a 2020 Audi Trucks RS Q8 even though it is a modern performance SUV rather than a vintage restoration candidate. The two applicable sizes, 295/35R23 and 295/40R22, are tied to distinct wheel diameters, so using the proper size helps preserve the intended stance and wheel-to-tire relationship.
A refurbishment-minded owner should confirm which wheel package is on the vehicle and avoid assuming that both sizes can be used interchangeably. If the goal is to keep the SUV close to its original presentation, matching the tire size to the existing wheel setup is one of the simplest ways to maintain the right overall look.
How does tire size affect the appearance of a 2020 Audi Trucks RS Q8?
Tire size has a strong visual effect on a 2020 Audi Trucks RS Q8 because both approved fitments are very wide and are paired with large-diameter wheels. The 295/35R23 and 295/40R22 sizes each create a different wheel-and-sidewall presentation, even though their overall proportions are fairly close in broad appearance.
For owners who care about preserving the SUV’s intended visual balance, the first step is staying with the size that matches the wheels currently on the vehicle. Swapping wheel diameter changes the look immediately, so a careful size check helps maintain the stance, wheel fill, and overall character of the RS Q8.
Fitment, Maintenance & Road Use
Can modifications affect tire fitment on a 2020 Audi Trucks RS Q8?
Yes, modifications can affect tire fitment on a 2020 Audi Trucks RS Q8, especially because the vehicle uses wide 295-section tires on either 22-inch or 23-inch wheels. Aftermarket wheels, suspension changes, lowering, spacer use, or brake-related wheel changes can all alter the clearance and wheel specifications that the tire must work with.
A modified RS Q8 should be checked more carefully before tire replacement than one on a stock-style setup. Confirm the actual wheel diameter on the vehicle, inspect inner and outer clearance, and make sure the replacement size matches the wheel package in use. A quick visual check is not enough on a performance SUV with this tire width.
What should I inspect before driving a 2020 Audi Trucks RS Q8 on new tires?
Before driving a 2020 Audi Trucks RS Q8 on new tires, inspect that all four tires are the correct size for the wheels, that inflation is set properly, and that there is no visible damage such as cuts, bulges, or mounting-related sidewall issues. It also helps to confirm that the wheel and tire combination is consistent across the vehicle.
A short follow-up inspection after the first drive is worthwhile, especially on a high-performance SUV with low-profile tires. Check for any rubbing during full steering lock, watch for vibration, and verify that air pressure remains stable. Catching a fitment or installation issue early helps prevent uneven wear and road-use problems.
What should I check before a longer drive in a 2020 Audi Trucks RS Q8?
Before a longer drive in a 2020 Audi Trucks RS Q8, check tire pressure, tread condition, sidewall condition, and any signs of air loss. Because this model uses large-diameter radial tires with relatively short sidewalls, it is also smart to look closely for impact damage from potholes or curb contact.
Longer trips are easier on the vehicle when the wheel and tire setup is in sound condition from the start. Verify that the installed size matches the wheel diameter, inspect the wheels for bends or cracks, and pay attention to any existing vibration or pull. Those checks are especially worthwhile on a performance-oriented SUV.
