The 2020 Aston Martin DB11 blends grand touring refinement with modern high-performance character, making tire fitment a central part of how the car looks, responds, and puts power to the road. Whether in Coupe, Volante, or AMR form, this is a low-slung contemporary Aston built around a staggered setup rather than a single all-around tire size. The 2020 Aston Martin DB11 uses 255/40R20 front tires and 295/35R20 rear tires, both in radial construction on 20-inch wheels. Available choices center on blackwall performance radials from BFGoodrich and Nitto. The key is preserving the correct front-to-rear relationship while confirming the actual wheel setup on the car.
Which Tire Size Is Right for The 2020 Aston Martin DB11
The 2020 Aston Martin DB11 uses two primary tire sizes, with 255/40R20 at the front and 295/35R20 at the rear. Both are metric radial sizes on 20-inch rims, so the first step is confirming whether you are replacing the front pair, the rear pair, or a complete staggered set. Getting that front-to-rear sizing relationship right matters more here than choosing between multiple constructions.
In 255/40R20, the 255 is the nominal section width in millimeters, 40 is the aspect ratio, R identifies radial construction, and 20 is the wheel diameter in inches. On the 2020 Aston Martin DB11, this size serves the front axle and is part of the car's staggered tire layout. Current choices in this size include a blackwall BFGoodrich g-Force Phenom T/A. This is the size to evaluate when front-end response, wheel compatibility, and maintaining the intended front fitment are the priority.
In 295/35R20, the 295 is the nominal section width in millimeters, 35 is the aspect ratio, R indicates radial construction, and 20 is the wheel diameter in inches. On the 2020 Aston Martin DB11, this is the rear tire size and it works with the narrower front size as part of the car's staggered setup. Available options include a blackwall Nitto NT555 G2. This is the size to focus on when replacing rear tires and preserving the DB11's intended balance, traction, and rear-wheel fitment.
Fitment stays consistent across the covered DB11 variants because each uses the same staggered radial layout: one size for the front and a wider size for the rear. Checking the exact sub-model still matters so the front and rear positions do not get mixed during replacement.
1
2020 Aston Martin DB11 AMR Front
The 2020 Aston Martin DB11 AMR Front uses the front portion of the DB11 staggered radial setup on a 20-inch wheel. Tire selection here centers on replacing the correct front size and matching it to the rear setup already on the car.
The 2020 Aston Martin DB11 AMR Rear uses the wider rear fitment in the DB11's staggered radial arrangement on a 20-inch wheel. Choosing the correct rear size is important for maintaining the intended front-to-rear relationship rather than treating all four tires as interchangeable.
The 2020 Aston Martin DB11 Coupe Front follows the same front tire fitment used across the covered DB11 range. Tire choice at this position is mainly about confirming the front size and selecting a radial that suits the wheel and the car's existing staggered setup.
The 2020 Aston Martin DB11 Coupe Rear uses the wider rear tire size that completes the staggered arrangement. That means replacement should stay focused on the rear-specific fitment and should be checked against the actual rear wheel setup on the car.
The 2020 Aston Martin DB11 Volante Front uses the same front radial fitment as the other covered DB11 variants. Replacing this position correctly means confirming the front size and keeping it paired with the proper wider rear fitment.
The 2020 Aston Martin DB11 Volante Rear uses the same wider rear radial size found on the other covered DB11 variants. Tire selection should keep the staggered front-and-rear arrangement intact and verify the actual rear wheel dimensions before changing brands or models.
The tire sizes listed on this page assume factory-standard vehicle configuration. The following modifications may affect tire fitment and are not reflected in this guide:
Suspension changes (lowering, lift kits, spring replacements)
Body alterations (fender modifications, custom bodywork)
If your vehicle has been modified from factory specifications, verify tire clearance before purchase.
Best 2020 Aston Martin DB11 Tires for Sale
Available 2020 Aston Martin DB11 tire choices are split by axle position, with a BFGoodrich g-Force Phenom T/A in the 255/40R20 front size and a Nitto NT555 G2 in the 295/35R20 rear size. Both are blackwall radials, so comparison centers on correct position, tire series, and wheel compatibility.
The most important 2020 Aston Martin DB11 tire questions usually involve the staggered front-and-rear sizes, 20-inch wheel fitment, product selection by axle position, and the checks to make before driving or replacing tires on a grand touring performance car.
Tire Size & Fitment
What tire size fits a 2020 Aston Martin DB11?
The 2020 Aston Martin DB11 uses a staggered tire setup, with 255/40R20 on the front and 295/35R20 on the rear. Both are radial tire sizes mounted on 20-inch wheels, and that front-to-rear difference applies across the covered DB11 configurations including AMR, Coupe, and Volante positions.
That means the right tire depends on where it goes on the car, not just the year and model name. A DB11 owner replacing tires should confirm whether the front axle, rear axle, or all four tires are being serviced, then verify that the actual wheels on the car still match the original staggered arrangement.
What size rim does a 2020 Aston Martin DB11 use?
The primary tire sizes for the 2020 Aston Martin DB11 both use a 20-inch rim diameter. The front 255/40R20 and rear 295/35R20 are both built around that same wheel diameter, even though the rear tire is noticeably wider than the front.
Rim diameter is only the first check, especially on a staggered performance car. Wheel width and the actual front-versus-rear setup still need to be confirmed before replacing tires, particularly if the DB11 has aftermarket wheels, prior tire changes, or any suspension changes that may affect clearance or overall fitment.
Do all 2020 Aston Martin DB11 sub-models use the same tire size?
The covered 2020 Aston Martin DB11 sub-model positions share the same staggered pattern rather than using one universal size. AMR, Coupe, and Volante front positions use 255/40R20, while AMR, Coupe, and Volante rear positions use 295/35R20.
The practical takeaway is that fitment is consistent by axle location, not by a single all-around size. A buyer should identify whether the tire is for the front or rear of the car before selecting a replacement, and should double-check the wheel setup if the car has been modified from its standard staggered layout.
Choosing the Right Tire
What should I consider when choosing a 255/40R20 or 295/35R20 tire for a 2020 Aston Martin DB11?
Start with position on the car, because the 2020 Aston Martin DB11 uses 255/40R20 in front and 295/35R20 in the rear. Both are radial 20-inch fitments, so the main selection factors are using the correct axle-specific size, matching the tire to the wheel, and choosing a product that suits the car's grand touring and performance character.
Product details matter once the size is settled. Compare the tire series, sidewall presentation, rim-width specifications where available, and any load or weight figures that are relevant to your setup. Keeping the intended staggered layout intact is especially important on a DB11, since front and rear tires serve different roles.
What sidewall styles are available for 2020 Aston Martin DB11 tires?
The available 2020 Aston Martin DB11 tire options in these sizes use a blackwall sidewall style. That applies to the front 255/40R20 BFGoodrich g-Force Phenom T/A and the rear 295/35R20 Nitto NT555 G2, giving the car a clean contemporary performance look rather than a vintage sidewall treatment.
For most DB11 owners, that means sidewall choice is straightforward and the bigger decision becomes choosing the correct front or rear size and comparing tire series. A blackwall presentation also keeps attention on wheel design and body lines, which suits the modern grand touring character of the car.
What brands offer tires for the 2020 Aston Martin DB11?
Current options for the 2020 Aston Martin DB11 include BFGoodrich in the 255/40R20 front size and Nitto in the 295/35R20 rear size. Both are radial blackwall tires, but they are offered in different tire series and for different axle positions within the DB11's staggered configuration.
That brand split makes it important to shop by size and axle position first, then compare the tire series that are actually available for that location. Brand alone should not drive the decision, because the DB11 depends on keeping the correct front-and-rear sizing relationship as much as the individual tire choice.
Fitment, Maintenance & Road Use
Can modifications affect tire fitment on a 2020 Aston Martin DB11?
Yes, modifications can affect tire fitment on a 2020 Aston Martin DB11 even when the replacement tire size is correct on paper. Aftermarket wheels, changes in wheel width or offset, lowered suspension, and body or brake modifications can all alter how a 255/40R20 front or 295/35R20 rear tire sits in the car.
A modified DB11 should be checked for front steering clearance, rear fender clearance, and adequate space around suspension and brake components before new tires are installed. The car's staggered setup adds another layer, since a change that works at one axle does not automatically suit the other end of the vehicle.
What should I inspect before driving a 2020 Aston Martin DB11 on new tires?
Before driving a 2020 Aston Martin DB11 on new tires, inspect the wheel condition, confirm that the front and rear sizes were installed in the correct positions, and check for proper inflation. It is also wise to look for any immediate clearance concerns, rubbing marks, or unusual mounting issues before putting miles on the car.
A short, careful first drive can reveal vibration, pull, or interference that was not obvious while the car was stationary. Rechecking air pressure after installation and confirming that the staggered setup remains front-to-rear correct helps protect both tire life and the grand touring road manners expected from a DB11.
How often should tires on a 2020 Aston Martin DB11 be inspected?
Tires on a 2020 Aston Martin DB11 should be inspected regularly, not just when tread looks worn. Performance grand tourers often cover fewer miles than daily drivers, so age, air loss, sidewall condition, and uneven wear deserve routine attention alongside basic tread depth checks.
Monthly pressure checks are a sensible habit, and a closer visual inspection before longer drives is especially worthwhile. Look for cracking, cuts, bulges, punctures, or signs of rubbing at either axle. Because the DB11 uses different front and rear sizes, each end of the car should be evaluated on its own rather than as a single set.
