The 2019 Jaguar Trucks I-Pace arrived at a moment when luxury performance shifted decisively toward electrification, blending Jaguar design language with the instant torque and quiet road manners expected from a modern EV. For owners, tire choice matters as much as styling because the I-Pace uses three distinct radial fitments: 235/65R18, 245/50R20, and 255/40R22. Those sizes span different wheel diameters and change the starting point for replacement selection. The decision is less about vintage construction and more about matching the exact wheel setup, sub-model configuration, and the balance you want between original-size fitment, appearance, and everyday road use.
Which Tire Size Is Right for The 2019 Jaguar Trucks I-Pace
The 2019 Jaguar Trucks I-Pace uses three primary tire sizes, and the right one depends first on the exact sub-model and wheel diameter on the vehicle. Because these fitments span 18-inch, 20-inch, and 22-inch rims, the first step is confirming the actual wheel size before choosing a replacement tire. Once that is settled, the main decision becomes selecting the right modern radial fitment for the way the vehicle is equipped and driven.
Fit(s): First Edition EV400, HSE EV400, S EV400, and SE EV400
Construction: Radial|Rim: 20 in
245/50R20 is a metric radial size in which 245 identifies nominal section width in millimeters, 50 is the aspect ratio, R indicates radial construction, and 20 is the wheel diameter in inches. On the 2019 Jaguar Trucks I-Pace, this is one of the core modern fitments and suits vehicles equipped with 20-inch wheels. Its sizing reflects a contemporary low-profile performance-oriented format rather than an older bias-ply convention. This is the right size to evaluate when the vehicle is already on 20-inch wheels and the goal is to stay with the original wheel diameter and overall fitment approach.
Fit(s): First Edition EV400, HSE EV400, S EV400, and SE EV400
Construction: Radial|Rim: 22 in
255/40R22 is a metric radial size that uses a 255-millimeter nominal section width, a 40-series aspect ratio, radial construction, and a 22-inch wheel diameter. For the 2019 Jaguar Trucks I-Pace, this fitment belongs to vehicles equipped with the largest wheel package covered here. The shorter sidewall gives it a distinctly modern sizing profile, so accuracy in wheel diameter and overall setup matters before replacement. This is the size to consider when maintaining a 22-inch-wheel I-Pace configuration rather than stepping into a different wheel and tire combination.
235/65R18 is a metric radial size where 235 is the nominal section width in millimeters, 65 is the aspect ratio, R marks radial construction, and 18 identifies the wheel diameter in inches. On the 2019 Jaguar Trucks I-Pace, it serves as the fitment for vehicles running the 18-inch wheel setup. Compared with the other I-Pace sizes here, it follows a taller sidewall profile while remaining a fully modern radial format. This size is the correct starting point when the vehicle has 18-inch wheels and the intention is to preserve that wheel diameter and fitment layout.
Sub-model fitment on the 2019 Jaguar Trucks I-Pace varies, and some versions can use more than one tire size depending on wheel package. Checking the exact sub-model matters, but confirming the wheel diameter already on the vehicle is just as important before selecting a replacement tire.
1
2019 Jaguar Trucks I-Pace First Edition EV400
The 2019 Jaguar Trucks I-Pace First Edition EV400 uses either 245/50R20 or 255/40R22, both in radial construction. That means replacement selection begins with confirming whether the vehicle carries 20-inch or 22-inch wheels, then choosing the appropriate modern metric radial size to match that setup.
The 2019 Jaguar Trucks I-Pace HSE EV400 can use 235/65R18, 245/50R20, or 255/40R22 radial tires. Tire choice therefore depends on the actual wheel package on the vehicle, making wheel-diameter confirmation more important than relying on trim name alone.
The 2019 Jaguar Trucks I-Pace S EV400 can be fitted with 235/65R18, 245/50R20, or 255/40R22 in radial construction. The practical step is to verify the wheel size on the vehicle first, then stay with the matching tire size rather than assuming every S EV400 uses the same setup.
The 2019 Jaguar Trucks I-Pace SE EV400 uses one of three radial tire sizes: 235/65R18, 245/50R20, or 255/40R22. Because more than one wheel package applies, the safest path is to match the replacement tire to the wheel diameter currently on the vehicle and then check overall clearance and condition.
The tire sizes listed on this page assume factory-standard vehicle configuration. The following modifications may affect tire fitment and are not reflected in this guide:
Suspension changes (lowering, lift kits, spring replacements)
Body alterations (fender modifications, custom bodywork)
If your vehicle has been modified from factory specifications, verify tire clearance before purchase.
Frequently Asked Questions
Owners of a 2019 Jaguar Trucks I-Pace usually need to sort out exact tire size, wheel diameter, and sub-model fitment before anything else. These FAQs focus on size meaning, rim fitment, product selection, modifications, and the maintenance checks that matter before regular road use.
Tire Size & Fitment
What tire size fits a 2019 Jaguar Trucks I-Pace?
The 2019 Jaguar Trucks I-Pace uses three primary tire sizes: 235/65R18, 245/50R20, and 255/40R22. All three are radial fitments, and the correct size depends on the sub-model and, more importantly, the wheel package installed on the vehicle.
The practical first step is to confirm the actual wheel diameter on the I-Pace before choosing a tire. An S EV400, SE EV400, or HSE EV400 may use more than one size, so the trim name alone is not always enough. Matching the replacement tire to the wheel already on the vehicle helps avoid confusion between 18-inch, 20-inch, and 22-inch setups.
What size rim does a 2019 Jaguar Trucks I-Pace use?
A 2019 Jaguar Trucks I-Pace can use 18-inch, 20-inch, or 22-inch rims, depending on configuration. The corresponding tire sizes are 235/65R18 for 18-inch wheels, 245/50R20 for 20-inch wheels, and 255/40R22 for 22-inch wheels.
Rim diameter is the most important fitment detail to verify before ordering replacement tires. A 20-inch tire will not mount on an 18-inch or 22-inch wheel, even if the vehicle is the same year and model. Checking the wheel itself, the current tire sidewall, and the exact sub-model helps confirm which I-Pace setup you are working with.
Do all 2019 Jaguar Trucks I-Pace sub-models use the same tire size?
No, 2019 Jaguar Trucks I-Pace sub-models do not all use the same tire size. The First Edition EV400 uses 245/50R20 or 255/40R22, while the HSE EV400, S EV400, and SE EV400 can use 235/65R18, 245/50R20, or 255/40R22.
That variation means sub-model identification is helpful, but wheel confirmation is still essential. Two I-Pace vehicles from the same year may share a trim family yet carry different wheel diameters. Before replacing tires, check the current sidewall markings and confirm the wheel size on the vehicle so the new tire matches the installed setup rather than a broader model description.
Choosing the Right Tire
What should I consider when choosing a tire for a 2019 Jaguar Trucks I-Pace?
Start with the exact tire size already used by the vehicle: 235/65R18, 245/50R20, or 255/40R22. The 2019 Jaguar Trucks I-Pace uses radial construction across all three fitments, so the main selection factors are correct size, correct wheel diameter, and staying with the proper overall fitment for the vehicle's wheel package.
After size is confirmed, compare the tire's intended role with how the I-Pace is driven. Daily-road use, ride preference, and wheel appearance can all influence the final choice within the correct size. It also helps to inspect wheel condition, confirm there is no clearance issue from prior modifications, and make sure all four tires are being replaced with a consistent fitment approach.
How do I choose between the available 2019 Jaguar Trucks I-Pace tire sizes?
The available sizes are not interchangeable choices for the 2019 Jaguar Trucks I-Pace in the abstract; they correspond to different wheel diameters. 235/65R18 belongs with 18-inch wheels, 245/50R20 with 20-inch wheels, and 255/40R22 with 22-inch wheels.
Choosing between them starts with the wheels already on the vehicle, not with preference alone. A buyer considering a different size would also be considering a different wheel setup, which brings in separate clearance, compatibility, and vehicle-setup questions. For straightforward replacement, match the tire size to the installed wheel diameter and confirm the exact sub-model range that applies.
What tire series are available for the 2019 Jaguar Trucks I-Pace?
Tire-series details are not the central fitment issue on the 2019 Jaguar Trucks I-Pace page because the first priority is identifying the correct size among 235/65R18, 245/50R20, and 255/40R22. Once the wheel diameter is confirmed, series differences matter only within that exact size.
For an I-Pace owner, the more useful comparison is usually between wheel-package fitments rather than between unrelated tire families. After the size is nailed down, evaluate the specific tire options available in that size for road use, ride preference, and overall vehicle setup. That keeps the decision tied to correct fitment instead of mixing products from different wheel diameters.
Restoration & Appearance
Does correct tire fitment matter for a 2019 Jaguar Trucks I-Pace restoration or preservation project?
Yes, correct tire fitment still matters on a 2019 Jaguar Trucks I-Pace, even though it is a modern EV rather than a vintage restoration vehicle. Keeping the proper size with the proper wheel diameter helps preserve the intended stance, wheel-to-tire proportion, and general visual balance of the vehicle.
Appearance on an I-Pace is closely tied to whether the vehicle is on 18-inch, 20-inch, or 22-inch wheels. Using the matching tire size maintains a coherent look and avoids awkward proportions that can come from mixing sizes without a full wheel-and-tire plan. Owners focused on preservation should verify the current wheel package before replacing tires so the vehicle retains its intended presentation.
Which tire size best preserves the appearance of a 2019 Jaguar Trucks I-Pace?
The size that best preserves the appearance of a 2019 Jaguar Trucks I-Pace is the one that matches the wheel diameter already on the vehicle. That means 235/65R18 for 18-inch wheels, 245/50R20 for 20-inch wheels, or 255/40R22 for 22-inch wheels.
Visual character changes with each wheel-and-tire combination because sidewall height and wheel proportion change with the size. An owner trying to keep the vehicle looking as equipped should avoid guessing from trim level alone and instead confirm the actual wheel package. Matching the replacement tire to that setup keeps the I-Pace's proportions consistent and avoids an unintended change in stance.
Fitment, Maintenance & Road Use
Can modifications affect tire fitment on a 2019 Jaguar Trucks I-Pace?
Yes, modifications can affect tire fitment on a 2019 Jaguar Trucks I-Pace. Changes such as aftermarket wheels, altered offsets, suspension lowering, or body modifications can change the space available for 235/65R18, 245/50R20, or 255/40R22 tires.
A modified I-Pace should be checked for wheel diameter, wheel width, and clearance at the fender, suspension, and steering positions before replacement tires are chosen. Even when the sidewall shows one of the standard sizes, the actual vehicle setup may no longer match a stock wheel package. That makes physical verification more useful than assuming the original trim-based fitment still applies.
What should I inspect before driving a 2019 Jaguar Trucks I-Pace on new tires?
Before driving a 2019 Jaguar Trucks I-Pace on new tires, inspect wheel condition, confirm the installed tires match the correct wheel diameter, and check inflation pressure once the tires are mounted. It is also smart to look over the valve stems and verify there is no visible rubbing or clearance issue.
A short initial drive should be followed by another visual check for even seating, air loss, or contact marks near the inner fender and suspension areas. On an EV such as the I-Pace, quiet operation can make small fitment issues easier to notice, so any vibration, pull, or unusual noise deserves attention before longer road use.
How often should tires on a 2019 Jaguar Trucks I-Pace be inspected?
Tires on a 2019 Jaguar Trucks I-Pace should be inspected regularly, not just at replacement time. Routine checks should include pressure, tread condition, irregular wear, cuts, bulges, and any signs of air loss, especially if the vehicle sees mixed city and highway use.
A practical habit is to inspect the tires monthly and again before any longer drive. The I-Pace uses low-profile fitments in 20-inch and 22-inch form, so wheel damage and sidewall condition deserve close attention after pothole impacts or curb contact. Catching wear or damage early helps protect ride quality and keeps the correct fitment working as intended.
