The 2019 Hyundai Trucks Santa Fe sits in the modern midsize crossover market, where comfort, daily usability, and all-around road manners matter as much as styling and trim level. For buyers replacing tires on this generation of Santa Fe, the key fitment question is not construction choice, but identifying the exact sub-model and wheel diameter first. This vehicle uses radial tire fitments in three sizes: 235/65R17, 235/60R18, and 235/55R19. That means tire selection centers on matching the correct size to the specific trim, then comparing road-focused options within that size. Before choosing a set, confirm the installed wheel package, especially if the vehicle has been changed from stock.
Which Tire Size Is Right for The 2019 Hyundai Trucks Santa Fe
The 2019 Hyundai Trucks Santa Fe uses three primary tire sizes, and the correct one depends on the specific sub-model and wheel diameter. All three are radial metric sizes, but they pair with different 17-inch, 18-inch, or 19-inch rims. The first step is confirming the exact trim level or checking the wheel size currently on the vehicle before selecting replacement tires.
A 235/55R19 tire is a metric radial size with a 235-millimeter section width, a 55-series aspect ratio, and a 19-inch rim diameter. On the 2019 Hyundai Trucks Santa Fe, this size serves trims equipped with the largest wheel package in the range, so appearance and wheel confirmation matter as much as the tire size itself. Its dimensions keep it close in overall height to the other Santa Fe fitments while using a lower-profile sidewall. This size should be chosen only when the vehicle is actually running the matching 19-inch wheel setup.
A 235/60R18 tire uses the same 235-millimeter section width as the other Santa Fe sizes, but with a 60-series sidewall on an 18-inch rim. This radial fitment applies to specific 2019 Hyundai Trucks Santa Fe sub-models that fall between the 17-inch and 19-inch wheel packages. It offers a straightforward modern sizing format that most buyers will recognize when comparing replacement choices. This is the right size to evaluate when the vehicle has the 18-inch wheel configuration and the goal is to keep the proper relationship between tire height and rim diameter.
A 235/65R17 tire is a metric radial size that combines a 235-millimeter section width with a 65-series sidewall and a 17-inch rim diameter. On the 2019 Hyundai Trucks Santa Fe, this size belongs to sub-models equipped with the smallest wheel diameter among the primary fitments. Its taller sidewall distinguishes it from the 18-inch and 19-inch Santa Fe sizes even though overall diameter remains very close. This size is the one to use when the vehicle is fitted with the 17-inch wheel package and the tire replacement needs to stay aligned with that setup.
Tire fitment for the 2019 Hyundai Trucks Santa Fe varies by sub-model, so trim identification matters before any replacement decision is made. Several trims share the same size, but the lineup spans three different rim diameters, making wheel confirmation just as important as reading the sidewall.
1
2019 Hyundai Trucks Santa Fe Limited 2.0T
The 2019 Hyundai Trucks Santa Fe Limited 2.0T uses the 235/55R19 radial size. Tire selection for this trim starts with confirming the 19-inch wheel package, then choosing a replacement that preserves the intended fitment and profile.
The 2019 Hyundai Trucks Santa Fe Limited 2.4L uses the 235/60R18 radial size. That places it in the middle of the Santa Fe fitment range, so buyers should verify the installed 18-inch wheels before comparing replacement tire options.
The 2019 Hyundai Trucks Santa Fe SE uses the 235/65R17 radial size. Replacement choices should stay focused on the 17-inch wheel setup, with attention paid to maintaining the proper tire size rather than moving between trim-level fitments.
The 2019 Hyundai Trucks Santa Fe SEL also uses the 235/65R17 radial size. That keeps fitment straightforward as long as the vehicle still wears its correct 17-inch wheels and has not been changed to a different trim-level wheel package.
The 2019 Hyundai Trucks Santa Fe SEL Plus uses the 235/60R18 radial size. Tire shopping for this sub-model should center on matching the 18-inch fitment and confirming the actual wheel setup if the vehicle was purchased used.
The 2019 Hyundai Trucks Santa Fe Ultimate 2.0T uses the 235/55R19 radial size. That makes the 19-inch wheel package the key checkpoint before selecting tires, especially on vehicles that may have had wheels changed for appearance or seasonal use.
The 2019 Hyundai Trucks Santa Fe Ultimate 2.4L uses the 235/60R18 radial size. Buyers should confirm that the vehicle still carries its 18-inch rims, then compare replacement tires within that exact size rather than borrowing fitment from another Santa Fe trim.
The tire sizes listed on this page assume factory-standard vehicle configuration. The following modifications may affect tire fitment and are not reflected in this guide:
Suspension changes (lowering, lift kits, spring replacements)
Body alterations (fender modifications, custom bodywork)
If your vehicle has been modified from factory specifications, verify tire clearance before purchase.
Frequently Asked Questions
Owners of a 2019 Hyundai Trucks Santa Fe usually need to sort out trim-based tire size, wheel diameter, and practical replacement questions first. These FAQs focus on fitment by sub-model, rim sizing, tire selection, and the checks worth making before putting the vehicle back on the road.
Tire Size & Fitment
What tire size fits a 2019 Hyundai Trucks Santa Fe?
The 2019 Hyundai Trucks Santa Fe uses three tire sizes: 235/65R17, 235/60R18, and 235/55R19. The correct size depends on the exact sub-model. SE and SEL models use 235/65R17, SEL Plus, Limited 2.4L, and Ultimate 2.4L use 235/60R18, while Limited 2.0T and Ultimate 2.0T use 235/55R19.
That makes trim identification the first step before ordering or installing tires. It is also smart to confirm the wheels currently on the vehicle, because a used Santa Fe may no longer have its original wheel package. The tire size on the sidewall and the rim diameter on the vehicle should agree with the fitment for the specific sub-model.
What size rim does a 2019 Hyundai Trucks Santa Fe use?
The 2019 Hyundai Trucks Santa Fe uses three rim diameters depending on sub-model: 17-inch, 18-inch, and 19-inch. The 235/65R17 tire fits a 17-inch rim, the 235/60R18 fits an 18-inch rim, and the 235/55R19 fits a 19-inch rim.
Rim diameter is the most important wheel measurement to verify before replacing tires, because each Santa Fe size is tied to a different wheel package. A 17-inch tire cannot be mounted on an 18-inch or 19-inch rim, even when overall tire height is close. Checking the installed wheel before purchase helps avoid choosing a tire that belongs to a different trim.
Do all 2019 Hyundai Trucks Santa Fe sub-models use the same tire size?
No, the 2019 Hyundai Trucks Santa Fe does not use one tire size across the entire lineup. The SE and SEL use 235/65R17, the SEL Plus, Limited 2.4L, and Ultimate 2.4L use 235/60R18, and the Limited 2.0T and Ultimate 2.0T use 235/55R19.
This matters because the three sizes correspond to three different wheel diameters, not just different sidewall proportions. Tire selection should follow the specific sub-model and the actual wheels on the vehicle today. If wheels have been swapped, the installed rim size becomes the deciding factor, and both clearance and overall fit should be checked before changing sizes.
Choosing the Right Tire
What should I consider when choosing a tire for a 2019 Hyundai Trucks Santa Fe?
Start with the correct tire size for the exact 2019 Hyundai Trucks Santa Fe sub-model, since this vehicle uses 235/65R17, 235/60R18, or 235/55R19 depending on trim. All primary fitments are radial, so the main decision is matching the proper size and wheel diameter rather than choosing between vintage construction types.
After size is confirmed, compare tires based on the kind of road use the Santa Fe sees most often and make sure the tire suits the wheel already on the vehicle. Buyers should also check that any prior wheel change, suspension alteration, or non-original package has not changed the fitment situation. Correct size comes first, then the details of the replacement tire.
How do I choose between the available 2019 Hyundai Trucks Santa Fe tire sizes?
The three Santa Fe sizes are not interchangeable choices for the same vehicle setup. Each one belongs to a specific trim and rim diameter: 17-inch, 18-inch, or 19-inch. The right approach is to match the tire to the sub-model and the wheel that is actually on the vehicle.
Because the overall diameters are close, it can be tempting to compare them as alternatives, but the rim diameter still controls what can be mounted safely. A buyer standing next to the vehicle should read the sidewall and confirm the wheel package before shopping. That prevents selecting a tire that belongs to another Santa Fe trim but not the current wheel.
Should I match the tire size already on my 2019 Hyundai Trucks Santa Fe?
In most cases, yes. Matching the size already installed is the simplest path when the vehicle still has the correct wheel package for its sub-model. On the 2019 Hyundai Trucks Santa Fe, that means staying with 235/65R17, 235/60R18, or 235/55R19 as appropriate for the trim and rim diameter.
A quick check is still worthwhile, especially on a used vehicle. Wheels may have been changed, or the Santa Fe may have been fitted with a different trim-level package at some point. Confirm the sidewall marking, verify the wheel diameter, and make sure the replacement plan matches the vehicle as it sits now rather than assuming every Santa Fe in this model year uses the same tire.
Restoration & Appearance
Does correct tire fitment matter for a 2019 Hyundai Trucks Santa Fe restoration?
Yes, correct tire fitment still matters even on a newer vehicle such as the 2019 Hyundai Trucks Santa Fe. The right size helps preserve the intended relationship between wheel diameter, sidewall height, and overall stance. Since this model uses three different tire sizes across the lineup, fitment accuracy starts with the exact sub-model and its corresponding wheel package.
Appearance is part of the equation, but the first goal is getting back to the proper size for the vehicle’s trim and wheels. A Santa Fe restored or refreshed for long-term ownership should not borrow a different size simply because another trim used it. Checking the original wheel setup and any past modifications keeps the finished look more consistent and the fitment more sensible.
How does tire size affect the appearance of a 2019 Hyundai Trucks Santa Fe?
Tire size changes the visual balance of a 2019 Hyundai Trucks Santa Fe because each fitment is tied to a different rim diameter and sidewall proportion. The 235/65R17 carries the tallest sidewall of the three, the 235/60R18 sits in the middle, and the 235/55R19 pairs the lowest-profile sidewall with the largest wheel.
That means appearance should be judged alongside proper fitment, not separately from it. A lower-profile tire on a larger wheel can give the Santa Fe a different visual character, but that setup belongs only on trims built around the matching rim diameter. Before changing the look, confirm wheel compatibility and make sure fender and suspension clearance remain appropriate for the vehicle.
Fitment, Maintenance & Road Use
Can modifications affect tire fitment on a 2019 Hyundai Trucks Santa Fe?
Yes, modifications can affect tire fitment on a 2019 Hyundai Trucks Santa Fe even when the original tire sizes are straightforward. Aftermarket wheels, suspension changes, lowering, or body alterations can all change the space available for the tire and may also change the wheel diameter or width from the original trim-level setup.
That is why the tire size should be matched to the vehicle as it sits now, not only to the badge on the liftgate. Checking wheel diameter, clearance at full steering lock, and room around the suspension helps avoid problems after installation. A modified Santa Fe deserves the same careful measurement approach as any other vehicle with changed wheels or ride height.
What should I inspect before driving a 2019 Hyundai Trucks Santa Fe on new tires?
Before driving a 2019 Hyundai Trucks Santa Fe on new tires, inspect the wheels for damage, confirm the tire size matches the rim diameter, and make sure inflation pressure is set correctly for the application. It is also worth checking for visible rubbing points, especially if the vehicle has different wheels or any suspension changes.
A short walk-around should include tread and sidewall inspection, valve stem condition, and a quick look for uneven ride height that could hint at suspension issues. After installation, watch for vibration, pulling, or contact during turns. Those checks help confirm that the new tires suit the Santa Fe’s actual setup and are ready for normal road use.
How often should tires on a 2019 Hyundai Trucks Santa Fe be inspected?
Tires on a 2019 Hyundai Trucks Santa Fe should be inspected regularly, not just when replacement time arrives. A visual check every month and before longer trips is a sensible routine. Look for cracking, cuts, bulges, uneven tread wear, and signs of air loss, even if the vehicle does not see especially high mileage.
Routine inspections matter because trim-specific sizing means the vehicle should stay on the correct wheel-and-tire combination over time. A buyer or owner should also confirm that all four tires remain the same size and that no previous replacement introduced a mismatch. Catching wear or fitment issues early is the best way to keep the Santa Fe driving as intended.
