The 2019 Hyundai Trucks Kona arrived as a compact crossover with a modern footprint, trim-level variety, and a strong emphasis on everyday drivability. Buyers looking at this exact Kona usually are not deciding between old and new tire construction, but between the correct trim-specific size and the kind of tire character they want from it. This model uses radial tires in three primary sizes: 205/60R16, 215/55R17, and 235/45R18, depending on sub-model. Available choices range from blackwall performance-oriented tires to a wide whitewall radial in the 16-inch size. The key is matching the tire to the Kona's exact trim and wheel diameter before comparing style, series, and road-use priorities.
Which Tire Size Is Right for The 2019 Hyundai Trucks Kona
The 2019 Hyundai Trucks Kona uses three different primary tire sizes, and the right one depends on the exact sub-model and wheel diameter. These are all radial fitments, but they span 16-inch, 17-inch, and 18-inch rims, so the first step is confirming which trim you have and verifying the actual wheel size on the vehicle before selecting a tire.
235/45R18 is a metric radial size in which 235 identifies the section width in millimeters, 45 is the aspect ratio, R denotes radial construction, and 18 is the rim diameter in inches. On the 2019 Hyundai Trucks Kona, this size is tied to trims using the larger 18-inch wheel setup. Available choices in this size come from BFGoodrich in blackwall form across g-Force Comp 2 AS, g-Force Sport Comp 2, and g-Force Phenom T/A series. It is the size to evaluate when your Kona carries the 18-inch factory-style wheel arrangement and you want to compare performance-focused radial options within that fitment.
205/60R16 is a metric radial size with a 205-millimeter section width, a 60-series aspect ratio, radial construction, and a 16-inch rim diameter. For the 2019 Hyundai Trucks Kona, this size serves trims equipped with the smaller 16-inch wheel package rather than the larger wheel setups used elsewhere in the lineup. The available product in this size is an American Classic radial with a 1.50-inch wide whitewall and asymmetrical tread styling, giving it a very different appearance from the blackwall performance choices in the larger sizes. It is the fitment to focus on when wheel diameter and visual presentation matter as much as basic size match.
215/55R17 is a metric radial size where 215 is the nominal section width in millimeters, 55 is the aspect ratio, R means radial, and 17 indicates a 17-inch rim. On the 2019 Hyundai Trucks Kona, this size fills the middle ground between the 16-inch and 18-inch trim-specific fitments. BFGoodrich offerings in this size include blackwall g-Force Comp 2 AS and g-Force Phenom T/A options, giving buyers a choice between tire series while staying within the correct size family. It is the size to confirm when your Kona uses the 17-inch wheel setup and you want a straightforward modern radial choice without moving to another rim diameter.
Tire fitment for the 2019 Hyundai Trucks Kona changes by sub-model, so trim identification matters before anything else. Several trims share the 18-inch setup, while others use distinct 16-inch or 17-inch sizes that should be matched to the wheel actually on the vehicle.
1
2019 Hyundai Trucks Kona Iron Man Edition
The 2019 Hyundai Trucks Kona Iron Man Edition uses the 235/45R18 radial size tied to the 18-inch wheel setup. That makes tire selection a matter of choosing among the available blackwall radial series while keeping wheel diameter and intended driving use in view.
The 2019 Hyundai Trucks Kona Limited uses the same 235/45R18 radial fitment found on other 18-inch Kona trims. Selection within this sub-model centers on comparing available BFGoodrich tire series rather than sorting through multiple primary sizes.
The 2019 Hyundai Trucks Kona SE uses the 205/60R16 radial size on a 16-inch rim. That makes wheel confirmation especially important, and it also gives this trim a notably different appearance path because the available tire in this size is a wide whitewall radial.
The 2019 Hyundai Trucks Kona SEL uses the 215/55R17 radial size with the 17-inch wheel package. Tire choice here is straightforward once the wheel size is confirmed, with blackwall BFGoodrich radial options providing the main comparison points.
The 2019 Hyundai Trucks Kona Ultimate uses the 235/45R18 radial fitment on an 18-inch rim. Buyers with this sub-model can focus on tire series and product specifications within that size instead of evaluating alternative primary fitments.
The tire sizes listed on this page assume factory-standard vehicle configuration. The following modifications may affect tire fitment and are not reflected in this guide:
Suspension changes (lowering, lift kits, spring replacements)
Body alterations (fender modifications, custom bodywork)
If your vehicle has been modified from factory specifications, verify tire clearance before purchase.
Best 2019 Hyundai Trucks Kona Tires for Sale
Available 2019 Hyundai Trucks Kona tires vary by trim-specific size, brand, series, and sidewall treatment. Buyers comparing the product grid will see BFGoodrich blackwall g-Force options in the 17-inch and 18-inch sizes, while the 16-inch fitment features an American Classic wide whitewall radial.
Tire questions for the 2019 Hyundai Trucks Kona usually come down to trim-specific sizing, wheel diameter, available radial choices, and the difference between blackwall performance styles and the 16-inch wide whitewall option. The answers below focus on fitment first, then product and road-use considerations.
Tire Size & Fitment
What tire size fits a 2019 Hyundai Trucks Kona?
The 2019 Hyundai Trucks Kona uses three primary tire sizes: 205/60R16, 215/55R17, and 235/45R18. The correct size depends on the exact sub-model, with SE using 205/60R16, SEL using 215/55R17, and Iron Man Edition, Limited, and Ultimate using 235/45R18.
That means the first job is confirming the trim and matching it to the wheel diameter actually on the vehicle. A Kona with replacement wheels or a previous tire change may no longer match its original trim-based setup, so check the current rim size before comparing brands, tread styles, or tire series.
What size rim does a 2019 Hyundai Trucks Kona use?
A 2019 Hyundai Trucks Kona can use 16-inch, 17-inch, or 18-inch rims, depending on sub-model. The 205/60R16 fitment uses a 16-inch rim, the 215/55R17 fitment uses a 17-inch rim, and the 235/45R18 fitment uses an 18-inch rim.
Rim diameter should be confirmed before any tire purchase because these sizes are not interchangeable across different wheel diameters. Even when overall tire height is relatively close between some sizes, the bead must match the wheel exactly, and wheel width should still be checked against the tire's approved rim-width range.
Do all 2019 Hyundai Trucks Kona sub-models use the same tire size?
No, 2019 Hyundai Trucks Kona sub-models do not all use the same tire size. SE uses 205/60R16, SEL uses 215/55R17, and Iron Man Edition, Limited, and Ultimate use 235/45R18.
That variation means trim identification matters just as much as the year, make, and model. A buyer looking only at the Kona name can easily end up in the wrong size, especially when moving between 16-inch, 17-inch, and 18-inch wheel packages that carry very different tire options and appearance outcomes.
Choosing the Right Tire
What should I consider when choosing a tire for a 2019 Hyundai Trucks Kona?
Start with the correct trim-specific size and wheel diameter, because the 2019 Hyundai Trucks Kona uses three different radial fitments. From there, compare the available tire series, sidewall style, approved rim-width range, and any load information attached to the exact tire you are considering.
A Kona with 17-inch or 18-inch wheels leans toward blackwall BFGoodrich g-Force choices, while the 16-inch fitment currently points to a wide whitewall American Classic radial. The right pick depends on whether the priority is staying with the existing wheel setup, pursuing a certain visual style, or matching the vehicle's intended road use.
What sidewall styles are available for 2019 Hyundai Trucks Kona tires?
Sidewall style depends on the Kona's tire size. The 235/45R18 and 215/55R17 fitments are available in blackwall form, while the 205/60R16 fitment is available as a 1.50-inch wide whitewall radial.
That creates a clear appearance split between the trim levels using larger performance-style blackwall tires and the 16-inch setup with a more distinctive whitewall presentation. Sidewall choice should still follow the correct size first, since selecting by looks alone can lead to the wrong rim diameter or an unsuitable wheel-width match.
What brands offer tires for the 2019 Hyundai Trucks Kona?
The available tire brands for the 2019 Hyundai Trucks Kona are BFGoodrich and American Classic. BFGoodrich covers the 215/55R17 and 235/45R18 sizes with several g-Force series, while American Classic appears in the 205/60R16 size with a wide whitewall radial.
Brand comparison on this vehicle is closely tied to size rather than being a simple across-the-board choice. Once the Kona's trim and rim diameter are confirmed, the buyer can then decide whether the available brand options support the preferred appearance, tread style, and general character of the tire.
Restoration & Appearance
Which tire should I choose for a period-style 2019 Hyundai Trucks Kona?
A period-style approach on a 2019 Hyundai Trucks Kona still begins with the correct trim-specific size, since the vehicle uses modern radial fitments in 16-inch, 17-inch, and 18-inch diameters. Among the available choices, the 205/60R16 American Classic wide whitewall creates the most distinctive appearance change, while the larger sizes remain blackwall performance-style radials.
Appearance should be balanced against the wheel package actually on the vehicle, because sidewall style cannot override basic fitment. Buyers who care deeply about preserving a certain showroom-era look should also compare the tire choice against original sales materials, dealer literature, or marque-specific references before treating any style as historically representative.
How does tire construction affect the appearance of a restored 2019 Hyundai Trucks Kona?
Construction is straightforward on the 2019 Hyundai Trucks Kona because all primary fitments here are radial tires. That means appearance differences come less from bias-ply versus radial shape and more from sidewall treatment, tire series character, and the visual impact of 16-inch, 17-inch, or 18-inch wheel-and-tire combinations.
The biggest visual divide in this lineup is between the blackwall BFGoodrich options on the 17-inch and 18-inch fitments and the wide whitewall American Classic available in 205/60R16. Anyone refining the vehicle's presentation should confirm trim, wheel size, and overall styling goals together rather than selecting a tire on sidewall appearance alone.
Fitment, Maintenance & Road Use
Can modifications affect tire fitment on a 2019 Hyundai Trucks Kona?
Yes, modifications can affect tire fitment on a 2019 Hyundai Trucks Kona even when the tire size appears close to stock. Aftermarket wheels, changes in wheel width, altered offset, suspension lowering, or body modifications can all change how a tire sits and whether it has adequate clearance.
That matters especially on a vehicle with three different factory wheel diameters, because a changed setup can blur the line between trim-based fitment and current fitment. Any modified Kona should have its actual wheel diameter, wheel width, and available steering and fender clearance checked before moving ahead with a tire selection.
What should I inspect before driving a 2019 Hyundai Trucks Kona on new tires?
Before driving a 2019 Hyundai Trucks Kona on new tires, inspect the wheel for correct diameter and condition, confirm proper inflation, and look over the suspension and alignment basics. It is also wise to verify that the tires clear the fenders and inner wheelhouse through steering travel if the vehicle's setup has changed.
A short test drive should be paired with a recheck for rubbing, unusual vibration, and air loss. Tire replacement is also a good time to inspect for uneven wear patterns on the old set, since those can point to alignment or suspension issues that may shorten the life of the new tires.
How often should tires on a 2019 Hyundai Trucks Kona be inspected?
Tires on a 2019 Hyundai Trucks Kona should be inspected regularly for pressure, tread wear, cuts, punctures, bulges, and sidewall damage. A monthly check is a practical baseline, with additional inspections before longer drives and after any impact with potholes, curbs, or road debris.
Collector-style storage is less of a concern here than on older classics, but low-use vehicles still need attention because age and underinflation can damage tires even when mileage stays low. Keeping an eye on wear patterns also helps catch alignment or suspension problems before they become a fitment or handling issue.
