The 2019 Ford Trucks Edge sits in the modern crossover segment where everyday comfort, all-weather confidence, and trim-specific styling all play a role in tire selection. In this generation, the Edge spans practical daily-driver trims as well as sportier versions with larger wheel packages, so tire fitment is tied closely to the exact sub-model and wheel diameter. This vehicle uses radial tire fitments in four sizes: 245/60R18, 245/55R19, 245/50R20, and 265/40R21. That gives owners a real choice between standard-height and lower-profile combinations depending on trim. The key step is matching the tire to the actual wheel and sub-model before comparing style, ride priorities, and replacement options.
Which Tire Size Is Right for The 2019 Ford Trucks Edge
The 2019 Ford Trucks Edge uses four different tire sizes, and the correct one depends on the exact sub-model and wheel diameter. Every primary fitment is a radial, but the sizes are spread across 18-inch, 19-inch, 20-inch, and 21-inch rims. Confirming the trim level and the actual wheel on the vehicle is the first step before selecting a replacement tire.
245/60R18 is a metric radial size where 245 identifies the nominal section width in millimeters, 60 is the aspect ratio, R indicates radial construction, and 18 is the rim diameter in inches. On the 2019 Ford Trucks Edge, this size suits trims equipped with an 18-inch wheel and keeps a taller sidewall profile than the larger-wheel alternatives. Its dimensions make it a practical fitment for owners focused on maintaining the intended wheel-and-tire relationship for that setup. It is the right size to evaluate when the vehicle is an SE or SEL with its original 18-inch wheel package.
245/50R20 is a metric radial size with a 245-millimeter nominal section width, a 50-series aspect ratio, and fitment on a 20-inch rim. On the 2019 Ford Trucks Edge, it appears on trims that use a larger wheel package and a lower-profile tire than the 18-inch and 19-inch combinations. The lower profile changes the tire's visual proportion and makes wheel confirmation especially important before replacement. This is the size to consider when the vehicle is equipped with the 20-inch setup used on certain ST and Titanium applications.
265/40R21 is a metric radial size in which 265 is the nominal section width in millimeters, 40 is the aspect ratio, R marks radial construction, and 21 is the rim diameter in inches. Among the 2019 Ford Trucks Edge fitments, this is the widest and lowest-profile primary size, paired with a 21-inch wheel. That makes it visually distinct from the other Edge sizes and especially important to match carefully to the actual wheel on the vehicle. It is the relevant fitment when an ST is running the larger 21-inch wheel package.
245/55R19 is a metric radial size with a 245-millimeter nominal section width, a 55-series aspect ratio, and a 19-inch rim diameter. On the 2019 Ford Trucks Edge, it represents a middle ground between the taller 18-inch fitment and the lower-profile 20-inch and 21-inch combinations. Its proportions make it important to distinguish from the nearby 245/60R18 and 245/50R20 sizes rather than selecting by width alone. This is the size to verify when the vehicle is a Titanium equipped with its 19-inch wheel setup.
Tire fitment on the 2019 Ford Trucks Edge varies by sub-model, so trim identification matters before anything else. Some versions use a single size, while others can have two different wheel-and-tire packages, making wheel diameter just as important as the badge on the vehicle.
1
2019 Ford Trucks Edge SE
The 2019 Ford Trucks Edge SE uses the 245/60R18 radial fitment on an 18-inch wheel. Tire selection for this sub-model is mainly about staying with the correct metric radial size and confirming the vehicle still has its original wheel diameter if any changes have been made.
The 2019 Ford Trucks Edge SEL also uses the 245/60R18 radial fitment. That keeps selection straightforward, but it is still worth checking the wheel itself before replacement since an SEL may no longer be on its original wheel-and-tire package.
The 2019 Ford Trucks Edge ST can use either 245/50R20 or 265/40R21, both in radial construction. That means the tire choice starts with confirming whether the vehicle has the 20-inch or 21-inch wheel package before comparing replacement options.
The 2019 Ford Trucks Edge Titanium can use either 245/55R19 or 245/50R20 in radial construction. For this sub-model, the important step is verifying the actual wheel diameter on the vehicle so the replacement tire matches the installed package.
The tire sizes listed on this page assume factory-standard vehicle configuration. The following modifications may affect tire fitment and are not reflected in this guide:
Suspension changes (lowering, lift kits, spring replacements)
Body alterations (fender modifications, custom bodywork)
If your vehicle has been modified from factory specifications, verify tire clearance before purchase.
Frequently Asked Questions
Questions about 2019 Ford Trucks Edge tires usually come down to trim-specific sizing, wheel diameter, and choosing the right radial fitment for the vehicle's actual setup. The FAQs below focus on size meaning, sub-model differences, replacement selection, and practical checks before road use.
Tire Size & Fitment
What tire size fits a 2019 Ford Trucks Edge?
The 2019 Ford Trucks Edge uses four possible tire sizes: 245/60R18, 245/55R19, 245/50R20, and 265/40R21. All of them are radial fitments, but they do not apply across every Edge trim. SE and SEL use 245/60R18, ST uses either 245/50R20 or 265/40R21, and Titanium uses either 245/55R19 or 245/50R20.
The practical step is to confirm both the sub-model and the wheel diameter currently on the vehicle. Some trims had more than one wheel-and-tire package, and a previous owner may have changed wheels as well. Matching the replacement tire to the installed rim diameter matters just as much as matching the trim name.
What size rim does a 2019 Ford Trucks Edge use?
A 2019 Ford Trucks Edge can use 18-inch, 19-inch, 20-inch, or 21-inch rims depending on sub-model and wheel package. The 245/60R18 size mounts on an 18-inch rim, 245/55R19 on a 19-inch rim, 245/50R20 on a 20-inch rim, and 265/40R21 on a 21-inch rim.
Rim diameter should be confirmed before shopping by reading the size already on the tire or checking the wheel itself. A 245 width does not guarantee the same rim diameter, and the Edge uses several sizes with similar widths but different profiles. Selecting by width alone can lead to the wrong replacement.
Why does the 2019 Ford Trucks Edge have more than one tire size?
The 2019 Ford Trucks Edge has more than one tire size because different sub-models use different wheel packages. SE and SEL use 245/60R18, Titanium can use either 245/55R19 or 245/50R20, and ST can use either 245/50R20 or 265/40R21. Those differences reflect trim-level wheel choices rather than one universal size for the whole model line.
That means the right replacement starts with identifying the exact trim and the actual wheel diameter on the vehicle today. An ST and a Titanium may both wear larger wheels, but they do not necessarily use the same tire. Checking the sidewall size and confirming the installed wheel package prevents an expensive mismatch.
Choosing the Right Tire
What should I consider when choosing a tire for a 2019 Ford Trucks Edge?
Start with the exact tire size already matched to the vehicle's sub-model and wheel diameter. The 2019 Ford Trucks Edge uses only radial primary fitments, but those fitments range from 18-inch through 21-inch rim diameters. A correct choice begins with matching the size code, then confirming the tire is appropriate for the wheel actually installed on the vehicle.
After size is settled, compare the tire's overall proportions to the package already on the Edge and think about how the vehicle is used. A replacement for a daily-driven SE or SEL may involve different priorities than one for an ST with 21-inch wheels. Wheel condition, suspension condition, and clearance should all be checked before installation.
How do I choose between the available tire sizes for a 2019 Ford Trucks Edge?
The available tire sizes are not interchangeable choices across the whole 2019 Ford Trucks Edge range. Each size belongs to a specific sub-model and wheel package, so the correct choice is the one that matches the vehicle's actual setup. The key comparison is not which size is better in general, but which size belongs on that particular Edge.
Once the proper size is confirmed, the remaining decision is about staying consistent with the installed wheel diameter and profile. An 18-inch SE or SEL should be evaluated differently from an ST on 21-inch wheels. Looking at the existing tire sidewall and measuring the wheel diameter removes guesswork before replacement.
What rim-fitment details matter when choosing 2019 Ford Trucks Edge tires?
Rim diameter is the most important fitment detail because the 2019 Ford Trucks Edge uses four different diameters: 18, 19, 20, and 21 inches. Every tire size on this vehicle is built around one specific rim diameter, so a 245-width tire still has to match the correct wheel. The sidewall numbers must line up with the wheel already on the vehicle.
It also helps to check that the wheel itself is the original size for the trim or a properly matched replacement. A used Edge may have aftermarket wheels, and that can change what tire belongs on it. Before mounting new tires, verify the wheel size, inspect for damage, and make sure the package clears suspension and body components.
Restoration & Appearance
Does correct tire fitment matter for a 2019 Ford Trucks Edge restoration or refresh?
Yes, correct tire fitment still matters on a 2019 Ford Trucks Edge even if the goal is more of a clean refresh than a traditional restoration. The vehicle's appearance and stance are closely tied to whether it uses the proper 18-inch, 19-inch, 20-inch, or 21-inch wheel-and-tire package. A mismatched profile can change the look as quickly as it changes fitment.
Owners trying to preserve an original-style presentation should start by confirming the sub-model and the wheel package the vehicle is actually wearing. That keeps the replacement tire in proportion with the Edge's trim-specific design. When originality is important, vehicle records, window-sticker documentation, or marque-specific references can help verify the intended setup.
How does tire size affect the appearance of a 2019 Ford Trucks Edge?
Tire size has a noticeable effect on how a 2019 Ford Trucks Edge sits and looks because the model uses several wheel diameters with different sidewall profiles. The 245/60R18 and 245/55R19 sizes present a taller sidewall than the 245/50R20 and especially the 265/40R21. That changes the visual balance between tire sidewall and exposed wheel.
Keeping the correct size for the trim helps preserve the intended appearance without forcing the vehicle into a different stance. It also avoids mixing a lower-profile tire with a wheel package that was not meant for it. Before changing sizes for appearance alone, confirm wheel compatibility and make sure clearance remains acceptable through steering and suspension movement.
Fitment, Maintenance & Road Use
Can modifications affect tire fitment on a 2019 Ford Trucks Edge?
Yes, modifications can affect tire fitment on a 2019 Ford Trucks Edge. Aftermarket wheels, suspension changes, lowering, or body alterations can all change the space available for the tire and can alter which size works properly on the vehicle. That matters even more on trims using 20-inch or 21-inch packages where profile and clearance are tighter.
Any Edge that has been changed from its original wheel setup should be measured rather than assumed to match factory sizing. Check wheel diameter first, then look at width, steering clearance, and space around the fender and suspension. Using the trim name alone is not enough when the vehicle has been modified from stock.
What should I inspect before driving a 2019 Ford Trucks Edge on new tires?
Before driving a 2019 Ford Trucks Edge on new tires, inspect the wheels for damage, confirm the tire size matches the installed rim diameter, and make sure inflation is set correctly for the application. It is also smart to check that the tires seat properly on the wheels and that there is no visible rubbing at full steering lock.
A short road test should include attention to vibration, pulling, unusual noise, and any sign of contact with suspension or body components. Recheck air pressure after the initial drive and look over the sidewalls for scuffs if the vehicle has larger wheels or a modified stance. Those simple steps help catch fitment issues before regular use.
What should I check before a longer drive in a 2019 Ford Trucks Edge?
Before a longer drive, check tire pressure, tread condition, and the sidewalls for cuts, bulges, or cracking. On a 2019 Ford Trucks Edge, it is also worth confirming that all four tires match the intended size for the vehicle's wheel package. Long-distance use is a poor time to discover that one tire size or rim diameter is inconsistent with the rest.
A quick inspection underneath can also reveal rubbing marks, loose splash shields, or suspension issues that may affect tire clearance. Pay extra attention if the Edge has recently had wheel changes, alignment work, or suspension service. Catching those details before a trip helps protect both the tires and the vehicle's overall road manners.
