The 2019 Ford Taurus represents the final chapter of Ford’s full-size sedan line, blending modern comfort, substantial road presence, and, in SHO form, a distinctly performance-oriented personality. That makes tire selection more configuration-specific than it might first appear. This Taurus uses three primary radial sizes—235/55R18, 255/45R19, and 245/45R20—depending on the exact sub-model and wheel package. The strongest product coverage here centers on 245/45R20, with choices that range from straightforward Blackwall sport radials to Redline and raised white letter styles for a more distinctive look. The key step is matching the tire to the car’s actual wheel diameter and trim before comparing appearance, series, and road-use priorities.
Which Tire Size Is Right for The 2019 Ford Taurus
The 2019 Ford Taurus uses three primary tire sizes, and the right one depends on the exact sub-model and wheel setup. These are all radial fitments, but they span 18-inch, 19-inch, and 20-inch rims, so confirming wheel diameter comes first. Once that is settled, the choice becomes selecting the proper size for the car and then comparing the available tire styles, series, and product characteristics within that fitment.
245/45R20 is a modern metric radial size in which 245 indicates section width in millimeters, 45 is the aspect ratio, and 20 is the rim diameter in inches. On the 2019 Ford Taurus, this size supports a low-profile, larger-wheel fitment used on specific configurations rather than every sub-model. Available choices include BFGoodrich, Nitto, and Pro-Trac products, with Blackwall, Redline, and RWL sidewall treatments and series such as g-Force Sport Comp 2, g-Force Comp 2 AS, g-Force Phenom T/A, and Street Pro III. It is the size to evaluate when the car is already equipped with 20-inch wheels and the goal is to compare style and tire character within that setup.
255/45R19 is a metric radial size that uses a 255-millimeter nominal section width, a 45-series profile, and a 19-inch rim. For the 2019 Ford Taurus, this is a configuration-specific fitment, so it should be matched to the exact trim and wheel package rather than assumed across the full model range. Its code points to a wider modern radial format on a 19-inch wheel, making wheel confirmation especially important before comparing alternatives. This size is the right starting point when the vehicle is already wearing 19-inch rims and the buyer needs to stay aligned with that original wheel diameter.
235/55R18 is a metric radial size with a 235-millimeter nominal section width, a 55-series profile, and an 18-inch rim diameter. On the 2019 Ford Taurus, it serves configurations that use the smaller of the three primary wheel diameters covered here, so it is tied directly to the car’s actual wheel setup. Compared with the other Taurus sizes on this page, the code reflects a taller-sidewall radial paired with an 18-inch rim rather than a lower-profile large-wheel fitment. It is the size to focus on when preserving proper compatibility with an 18-inch Taurus wheel package.
Tire fitment for the 2019 Ford Taurus is not the same across every sub-model, and some trims appear with more than one wheel-and-tire combination. Checking the exact trim and actual wheel diameter is the most important first step before choosing a replacement tire.
1
2019 Ford Taurus Limited
The 2019 Ford Taurus Limited uses either a 245/45R20 radial or a 255/45R19 radial, so this trim requires wheel confirmation before anything else. Once the rim diameter is verified, tire selection becomes a matter of staying with the correct size and then comparing the available product style and series within that fitment.
The 2019 Ford Taurus SE uses a 235/55R18 radial, which makes fitment more straightforward than the trims with multiple wheel packages. Tire selection centers on keeping that 18-inch size aligned with the car’s wheel setup and overall replacement dimensions.
The 2019 Ford Taurus SEL appears with either 235/55R18 or 245/45R20 radial tires, so the trim alone is not enough to choose a tire. The practical step is to inspect the car’s current wheel diameter first, then compare the available replacement options within the matching size.
The 2019 Ford Taurus SHO uses the 245/45R20 radial size, tying it to the largest wheel diameter used on this page. That makes the decision less about sub-model uncertainty and more about choosing among the available 20-inch tires by sidewall style, series, and intended road use.
The tire sizes listed on this page assume factory-standard vehicle configuration. The following modifications may affect tire fitment and are not reflected in this guide:
Suspension changes (lowering, lift kits, spring replacements)
Body alterations (fender modifications, custom bodywork)
If your vehicle has been modified from factory specifications, verify tire clearance before purchase.
Best 2019 Ford Taurus Tires for Sale
Available product choices center on 245/45R20, with BFGoodrich, Nitto, and Pro-Trac options in several radial series. Buyers can compare Blackwall, Redline, and RWL sidewall styles along with rim-width compatibility and other product-specific details in the grid below.
These FAQs focus on the exact tire sizes used on the 2019 Ford Taurus, how fitment changes by sub-model and wheel diameter, and how to compare the available 20-inch tire choices for appearance and road use.
Tire Size & Fitment
What tire size fits a 2019 Ford Taurus?
The 2019 Ford Taurus uses three primary tire sizes: 235/55R18, 255/45R19, and 245/45R20. All three are radial fitments, and the correct size depends on the exact sub-model and wheel package rather than the model name alone.
That means the first step is checking the car’s actual wheel diameter before ordering replacement tires. A Taurus SE uses 235/55R18, the SHO uses 245/45R20, and trims such as the Limited and SEL can appear with more than one size, so reading the existing tire sidewall and confirming the wheel setup helps avoid choosing the wrong fitment.
What size rim does a 2019 Ford Taurus use?
A 2019 Ford Taurus can use 18-inch, 19-inch, or 20-inch rims, depending on the sub-model and configuration. Those rim diameters correspond to the three primary tire sizes on this page: 235/55R18, 255/45R19, and 245/45R20.
Rim diameter needs to be confirmed before comparing any tire options because the three Taurus sizes are not built for the same wheel. Looking at the last number in the current tire size is the quickest guide, but it is still wise to verify the actual wheel on the car, especially if a prior owner changed wheels or if the trim was available with multiple factory-style setups.
Why does the 2019 Ford Taurus have more than one tire size?
The 2019 Ford Taurus has more than one tire size because fitment varies by sub-model and wheel package. The SE uses 235/55R18, the SHO uses 245/45R20, and the Limited and SEL can be found with different wheel-and-tire combinations.
This matters because the trim badge does not always settle the question by itself. A buyer should confirm both the sub-model and the wheel diameter currently on the car, then stay within the matching size before comparing tread style, sidewall appearance, or brand. That approach keeps the decision focused on the real configuration instead of assuming every Taurus shares the same setup.
Choosing the Right Tire
What should I consider when choosing a 245/45R20 tire for a 2019 Ford Taurus?
A 245/45R20 tire for a 2019 Ford Taurus should first match the car’s actual 20-inch wheel setup, since this is not a fitment used across every Taurus trim. After confirming size, the main comparison points are construction, sidewall style, tire series, and the wheel-width range supported by the specific product.
Within this size, available options include BFGoodrich, Nitto, and Pro-Trac products, with Blackwall, Redline, and RWL presentations. Some buyers will want a clean modern look, while others may prefer a more distinctive sidewall treatment. It also helps to compare load figures and wheel-width guidance where given, especially if the car has aftermarket wheels or sees more demanding road use.
What sidewall styles are available for 2019 Ford Taurus tires?
For the 2019 Ford Taurus products shown here, 245/45R20 is available with Blackwall, Redline, and RWL sidewall styles. Blackwall appears across several sport-oriented radial options, while Pro-Trac offers both Redline and raised white letter presentations in the same basic size category.
Sidewall style mainly affects the car’s visual character rather than the underlying size requirement. A Taurus owner should start with the correct 20-inch fitment, then decide whether the goal is a restrained modern appearance or something with more visual contrast. It is still important to compare the tire series and wheel-width guidance, since two tires with different sidewall treatments may not be otherwise identical.
What brands offer tires for the 2019 Ford Taurus?
The available 245/45R20 choices for the 2019 Ford Taurus include BFGoodrich, Nitto, and Pro-Trac. Those brands cover several radial product lines, giving the buyer more than one way to approach replacement depending on tire character and sidewall preference.
Brand alone should not be the only deciding factor. The better approach is to confirm the correct Taurus size first, then compare each tire’s series, sidewall style, and wheel-width compatibility. That is especially useful on 245/45R20, where Blackwall sport radials sit alongside Redline and RWL alternatives, creating a broader appearance range than a simple brand list might suggest.
Restoration & Appearance
Which tire should I choose for a period-style 2019 Ford Taurus?
A period-style 2019 Ford Taurus tire choice starts with the exact size already used by the car, since this model can wear 18-inch, 19-inch, or 20-inch fitments depending on trim. For a more distinctive visual treatment within the available 20-inch options, 245/45R20 includes Pro-Trac Street Pro III choices with Redline or RWL sidewalls.
The Taurus is a modern car rather than a restoration-era collector vehicle, so appearance usually comes down to preserving the car’s original visual balance instead of recreating a historic bias-ply look. Matching the correct wheel diameter and profile matters more than chasing style alone, especially on trims where larger wheels are part of the vehicle’s overall stance and presentation.
How does tire construction affect the appearance of a restored 2019 Ford Taurus?
Tire construction has less visual impact on a 2019 Ford Taurus than it would on an older collector vehicle because the primary fitments here are already radial. The more noticeable appearance differences come from sidewall treatment, wheel diameter, and profile, particularly on 245/45R20 where Blackwall, Redline, and RWL options are available.
Keeping the intended look of the car usually means staying with the correct size for the trim and wheel package first. On a modern full-size sedan like the Taurus, changing from an 18-inch, 19-inch, or 20-inch setup has a much bigger effect on visual character than changing between radial constructions, so wheel confirmation remains the more important appearance decision.
Fitment, Maintenance & Road Use
Can modifications affect tire fitment on a 2019 Ford Taurus?
Yes, modifications can affect tire fitment on a 2019 Ford Taurus. Changes such as aftermarket wheels, altered wheel widths, suspension lowering, or body clearance work can all influence whether the original tire size still remains the best match for the car’s current setup.
A Taurus that has been modified should be checked for actual wheel diameter, wheel width, and clearance at the fender and steering range before replacement tires are chosen. Even when the car originally used 235/55R18, 255/45R19, or 245/45R20, a changed setup can shift the fitment question from simple trim identification to a more careful wheel-and-clearance inspection.
What should I inspect before driving a 2019 Ford Taurus on new tires?
Before driving a 2019 Ford Taurus on new tires, inspect the wheel diameter and make sure the installed size matches the car’s actual setup. It is also smart to look over the wheels for damage, confirm proper inflation, and check that the tires have adequate clearance around suspension parts and fender edges.
A short inspection drive can help reveal any vibration, rubbing, or pull that was not obvious at a standstill. On a Taurus with replacement or aftermarket wheels, rechecking wheel fastener torque and confirming that the tire sits correctly on the rim are worthwhile steps. Catching those issues early helps prevent a simple size mistake from becoming a larger road-use problem.
How often should tires on a 2019 Ford Taurus be inspected?
Tires on a 2019 Ford Taurus should be inspected regularly rather than only when tread looks low. A routine visual check for uneven wear, sidewall damage, embedded road hazards, and air loss helps catch developing problems early, whether the car uses 18-inch, 19-inch, or 20-inch fitment.
Inspection becomes even more important if the Taurus is driven infrequently or sits for long periods, since age and storage conditions can matter as much as mileage. Checking inflation pressure, watching for vibration or pull during normal driving, and looking for cuts, cracks, or bulges gives the owner a practical picture of tire condition before longer trips or seasonal use.
