The 2019 Chevrolet Trucks Trax sits in the modern subcompact crossover class, combining city-friendly size with the higher seating position and everyday versatility many drivers want in a small utility vehicle. For owners, the tire decision is less about vintage-style construction and more about matching the right size to the vehicle’s exact trim and wheel package. This Trax uses radial tires in two primary sizes, 205/70R16 and 215/55R18, depending on sub-model. That makes trim identification and wheel diameter the first steps before comparing tire choices. Once those are confirmed, the focus shifts to maintaining the intended fitment, ride balance, and clearance for regular road use.
Which Tire Size Is Right for The 2019 Chevrolet Trucks Trax
The 2019 Chevrolet Trucks Trax uses two primary tire sizes, and the correct one depends on the sub-model and wheel diameter. Both fitments are radial, but one uses a 16-inch rim and the other uses an 18-inch rim, so confirming the exact wheel setup comes first. On LT models especially, identifying whether the vehicle is on 16-inch or 18-inch wheels is the key step before comparing tire options.
205/70R16 is a metric radial size in which 205 identifies the nominal section width in millimeters, 70 is the aspect ratio, R indicates radial construction, and 16 is the rim diameter in inches. On the 2019 Chevrolet Trucks Trax, this size supports the smaller wheel fitment used on certain sub-models. Its dimensions keep the Trax within the intended overall tire profile for that wheel package. This is the size to evaluate when the vehicle has 16-inch wheels and the goal is to maintain the proper fitment approach for that setup.
215/55R18 is also a metric radial size, with 215 showing nominal section width in millimeters, 55 marking the aspect ratio, R denoting radial construction, and 18 identifying the rim diameter in inches. For the 2019 Chevrolet Trucks Trax, this size belongs to the larger wheel fitment used on specific trims. Its sizing closely matches the alternate fitment in overall diameter while pairing with a different rim size and profile. This is the size to check when the Trax carries 18-inch wheels and trim-level fitment points to the larger package.
Tire fitment on the 2019 Chevrolet Trucks Trax varies by sub-model, and in some cases by wheel package within the same trim. Checking the exact trim and confirming whether the vehicle has 16-inch or 18-inch wheels will narrow the tire choice quickly.
1
2019 Chevrolet Trucks Trax LS
The 2019 Chevrolet Trucks Trax LS uses the 205/70R16 radial tire size. That makes selection fairly straightforward, with the main job being to confirm the 16-inch wheel setup and stay with the proper size for normal fitment and clearance.
The 2019 Chevrolet Trucks Trax LT can use either 205/70R16 or 215/55R18, so this trim requires extra attention before choosing tires. Wheel diameter is the deciding factor here, and matching the tire to the actual 16-inch or 18-inch setup matters more than the trim badge alone.
The 2019 Chevrolet Trucks Trax Premier uses the 215/55R18 radial tire size. Tire selection for this sub-model centers on confirming the 18-inch wheel package and keeping the fitment aligned with the larger-rim setup used on this version.
The tire sizes listed on this page assume factory-standard vehicle configuration. The following modifications may affect tire fitment and are not reflected in this guide:
Suspension changes (lowering, lift kits, spring replacements)
Body alterations (fender modifications, custom bodywork)
If your vehicle has been modified from factory specifications, verify tire clearance before purchase.
Frequently Asked Questions
Common questions for the 2019 Chevrolet Trucks Trax usually center on the correct tire size by trim, 16-inch versus 18-inch wheel fitment, and what to inspect before replacing tires or putting the vehicle back into regular road use.
Tire Size & Fitment
What tire size fits a 2019 Chevrolet Trucks Trax?
The 2019 Chevrolet Trucks Trax uses two primary tire sizes: 205/70R16 and 215/55R18. Both are radial sizes, and the correct one depends on the sub-model and wheel package. LS models use 205/70R16, Premier models use 215/55R18, and LT models can use either size depending on whether the vehicle has 16-inch or 18-inch wheels.
The most important step is confirming the actual wheel diameter on the vehicle before ordering tires. A trim badge alone is not enough on LT models, since that trim appears with both fitments. Checking the existing tire sidewall and wheel size helps prevent ordering the right overall diameter on the wrong rim.
What size rim does a 2019 Chevrolet Trucks Trax use?
A 2019 Chevrolet Trucks Trax uses either a 16-inch or 18-inch rim, depending on the tire size and sub-model. The 205/70R16 fitment uses a 16-inch rim, while the 215/55R18 fitment uses an 18-inch rim. Both tire sizes are radial, but they are built for different wheel diameters.
Rim diameter should be verified before anything else, because a 16-inch tire cannot be mounted on an 18-inch wheel and vice versa. Looking at the existing sidewall marking is usually the quickest check. On LT models, that confirmation is especially important because the same trim can appear with either wheel size.
Why does the 2019 Chevrolet Trucks Trax have more than one tire size?
The 2019 Chevrolet Trucks Trax has more than one tire size because tire fitment changes with sub-model and wheel package. LS uses 205/70R16, Premier uses 215/55R18, and LT can be equipped with either size. The two fitments pair with different rim diameters while staying close in overall tire height.
That means the right choice is tied to the vehicle’s actual wheel setup, not just the model name. Owners should confirm the trim, inspect the current sidewall size, and make sure the replacement matches the installed wheel diameter. This keeps the Trax within the intended fitment range and helps avoid mounting or clearance problems.
Choosing the Right Tire
What should I consider when choosing a tire for a 2019 Chevrolet Trucks Trax?
Start with the correct size for the exact 2019 Chevrolet Trucks Trax setup: 205/70R16 for certain models and 215/55R18 for others. Since LT models can use either size, wheel diameter needs to be confirmed before comparing anything else. Both primary fitments are radial, so the selection process is about correct sizing first.
After size is confirmed, compare tires around how the Trax is actually used. Daily commuting, seasonal weather, ride priorities, and tread design all matter more than switching sizes. Matching the replacement to the existing wheel, keeping the intended overall fitment, and checking load suitability are the practical steps that keep the choice grounded.
How do I choose between the available 2019 Chevrolet Trucks Trax tire sizes?
Choosing between 205/70R16 and 215/55R18 is not a matter of preference alone, because each size belongs to a different wheel diameter. The correct size follows the installed wheel setup and, in many cases, the sub-model. LS points to 205/70R16, Premier points to 215/55R18, and LT requires closer confirmation.
The deciding check is simple: verify the tire size already on the vehicle or measure the wheel diameter directly. Trying to choose between the two without confirming the wheel can lead to an immediate mismatch. Once the proper size is established, then it makes sense to compare tread design, brand preference, and road-use priorities.
What rim-fitment details matter when choosing 2019 Chevrolet Trucks Trax tires?
Rim diameter is the key rim-fitment detail on the 2019 Chevrolet Trucks Trax. The vehicle uses either 16-inch wheels with 205/70R16 tires or 18-inch wheels with 215/55R18 tires. Because those sizes are tied to different rim diameters, the replacement tire has to match the wheel that is actually on the vehicle.
Wheel condition and any past changes also deserve attention before replacement. A Trax with aftermarket wheels, replacement rims, or a changed suspension setup should be checked carefully so the tire size still suits the vehicle’s current configuration. Confirming diameter first, then checking width and clearance, is the safest way to approach selection.
Restoration & Appearance
Does correct tire fitment matter for a 2019 Chevrolet Trucks Trax restoration or refurbishment?
Correct tire fitment matters on a 2019 Chevrolet Trucks Trax even when the goal is simply to refresh the vehicle rather than perform a vintage-style restoration. Using the proper 205/70R16 or 215/55R18 size keeps the wheel-and-tire package aligned with the Trax’s intended setup and preserves the vehicle’s overall stance.
Appearance and fitment work together, especially on a modern crossover where wheel diameter changes the visual balance quickly. A cleaned-up driver or resale-minded refurbishment benefits from staying with the proper size for the installed wheels. For the most accurate trim-specific presentation, compare the vehicle’s current setup with original trim and wheel equipment.
How does tire size affect the appearance of a 2019 Chevrolet Trucks Trax?
Tire size has a visible effect on the appearance of a 2019 Chevrolet Trucks Trax because the two factory fitments pair with different wheel diameters and sidewall proportions. A 205/70R16 setup presents more sidewall on a 16-inch wheel, while a 215/55R18 setup places a shorter sidewall around an 18-inch wheel.
That difference changes the Trax’s visual balance even though the two sizes stay close in overall diameter. Owners trying to keep the vehicle looking consistent with its trim should match the tire to the correct wheel package. Before changing anything for style reasons, confirm that wheel size, clearance, and ride expectations still make sense together.
Fitment, Maintenance & Road Use
Can modifications affect tire fitment on a 2019 Chevrolet Trucks Trax?
Yes, modifications can affect tire fitment on a 2019 Chevrolet Trucks Trax. Changes such as aftermarket wheels, altered wheel offset, suspension lowering, lift components, or body modifications can change how a 205/70R16 or 215/55R18 tire sits in the wheel opening. Even when the tire size stays the same, the overall setup can behave differently.
That is why the vehicle should be checked as it currently sits, not only by original trim. Steering clearance, fender clearance, and wheel diameter all matter when a Trax has been changed from stock. A quick inspection before replacement helps confirm that the intended tire still suits the actual wheel and suspension combination.
What should I inspect before driving a 2019 Chevrolet Trucks Trax on new tires?
Before driving a 2019 Chevrolet Trucks Trax on new tires, inspect the wheel condition, confirm the tire size matches the installed rims, and check inflation pressure. It is also wise to look over the suspension and steering for looseness or wear that could affect how the new tires track and wear on the road.
A short road check after installation is useful for catching vibration, rubbing, or pull early. Lug hardware should be properly tightened, and the tires should clear the fenders and inner wheel wells through normal steering travel. Taking a few minutes to verify those basics helps the new setup perform as intended from the start.
How often should tires on a 2019 Chevrolet Trucks Trax be inspected?
Tires on a 2019 Chevrolet Trucks Trax should be inspected regularly, not just when tread looks low. Pressure, visible tread wear, cuts, bulges, punctures, and uneven shoulder wear are all worth checking throughout the year. Even a modern crossover that sees routine use can develop tire issues gradually between scheduled service visits.
A good habit is to inspect the tires during pressure checks, before longer trips, and anytime the vehicle begins to ride differently. Extra attention is worthwhile after pothole impacts or curb contact. Staying ahead of wear and air loss helps protect the correct 16-inch or 18-inch fitment and makes replacement timing easier to judge.
