2019 Audi RS5 Tires

The 2019 Audi RS5 uses two primary tire sizes: 265/35R19 and 275/30R20. Both are radial metric sizes, and both appear on the covered RS5 configurations. The right choice depends first on the wheel diameter installed on the car, since one size fits a 19-inch rim and the other fits a 20-inch rim.

That means tire selection starts at the wheel, not the badge or package name alone. Check the actual rim diameter on the vehicle before ordering, especially if the car has changed hands or has aftermarket wheels. Once the wheel size is confirmed, compare the tires available in that exact size rather than treating the two fitments as interchangeable.

A 2019 Audi RS5 can use either a 19-inch or 20-inch rim, depending on which of its two tire sizes is on the car. The 265/35R19 fitment uses a 19-inch rim, while the 275/30R20 fitment uses a 20-inch rim. Both setups are part of the covered RS5 fitment range.

Rim diameter should be confirmed before anything else, because the tire size must match it exactly. It is also smart to verify wheel width when comparing products, since some tires include a stated rim-width range. If the car has replacement wheels, check the actual wheel markings rather than assuming the current tire size reflects the original setup.

The covered 2019 Audi RS5 sub-models share the same two tire sizes: 265/35R19 and 275/30R20. That includes the Base model and the RS5 w/Dynamic Plus Pkg. In practice, the fitment pattern stays consistent across those sub-models, with the real distinction being whether the car is wearing 19-inch or 20-inch wheels.

This makes sub-model selection simpler, but it does not remove the need to confirm the wheels on the individual car. A quick check of tire sidewall markings and wheel diameter will prevent ordering the wrong fitment. That is especially important when a vehicle may have been upgraded, swapped to seasonal wheels, or altered from its prior setup.

Start with the correct size for the wheel on the car: 265/35R19 for a 19-inch setup or 275/30R20 for a 20-inch setup. From there, compare the tire’s construction, brand, series, and any available rim-width or load details. On this RS5, the choices are all radial performance tires, so the decision is about matching the vehicle’s wheel package and intended use.

Appearance is straightforward here because the available tires are blackwall designs, but the series differences still matter for how the tire fits your priorities. A car driven regularly may call for a different buying emphasis than one used occasionally. Keep wheel diameter, wheel width, and the car’s current setup at the center of the decision before comparing finer product details.

Tires for the 2019 Audi RS5 are available from BFGoodrich and Nitto in the covered fitments. The 265/35R19 size includes BFGoodrich and Nitto options, while the 275/30R20 coverage includes Nitto. These are all blackwall radial performance tires intended for the RS5’s modern metric fitment.

Brand choice should be considered alongside the exact size and available tire series, not as a shortcut by itself. A 19-inch RS5 gives more room to compare brands and product lines, while the 20-inch fitment is more limited. Make sure the brand you are considering is available in the exact tire size on the car before narrowing the search further.

The available tire series for the 2019 Audi RS5 include BFGoodrich g-Force Sport Comp 2, BFGoodrich g-Force Phenom T/A, and Nitto NT555 G2. Those series appear across the covered 265/35R19 and 275/30R20 fitments. Each is offered as a blackwall radial, keeping the focus on size, wheel compatibility, and series selection rather than sidewall styling.

Series comparison is most useful once the correct tire size is confirmed. A 19-inch RS5 owner has more than one series to evaluate, which can help narrow the choice by intended driving use and product specifications. On a 20-inch setup, the comparison is simpler, but wheel diameter and clearance still need to be right before any product is selected.

Correct tire fitment still matters on a 2019 Audi RS5, even though it is a modern performance car rather than a vintage restoration subject. The right size preserves the intended relationship between the tire, wheel, and body, and keeps the car visually consistent with its factory-era stance. On this RS5, that means staying within the 265/35R19 or 275/30R20 fitment range as appropriate.

For a restoration-minded project, focus first on matching the wheel diameter installed on the car and avoiding improvised substitutions. The available products are blackwall radials, so appearance differences will come more from wheel package and tire series than from period sidewall treatments. If exact presentation matters, compare the current setup to original vehicle documentation before making changes.

On a 2019 Audi RS5, tire construction is straightforward because the covered fitments are radial. That keeps the car aligned with the modern, low-profile performance look expected of an RS5, especially with 35-series and 30-series sizing. Unlike older collector vehicles, the appearance question here is less about bias-ply versus radial and more about preserving the correct modern wheel-and-tire proportion.

A restoration-minded owner should pay close attention to the exact size and wheel diameter, since changing profile or wheel package can alter the visual character quickly. Blackwall sidewalls maintain the clean contemporary presentation seen in the available products. The safest path for appearance is choosing the correct fitment first, then comparing series and brand details within that size.

Yes, modifications can affect tire fitment on a 2019 Audi RS5. Aftermarket wheels, changes in wheel width, altered offset, lowered suspension, or body changes can all influence how a 265/35R19 or 275/30R20 tire sits in the wheel opening. Even when the size matches the rim diameter, the overall setup can still change clearance and fitment behavior.

Any modified RS5 should be checked for fender, inner-liner, and steering clearance before settling on a tire choice. Wheel width is also important, especially when a product includes a stated range such as 9 to 10.5 inches. A car with stock wheels is easier to match, but any non-stock setup deserves a closer look before replacing tires.

Before driving a 2019 Audi RS5 on new tires, confirm that the tire size matches the wheel diameter, the tires are mounted in the correct size set, and inflation is set properly for the vehicle’s application. It is also smart to inspect the wheels for damage and make sure the tires seat evenly and clear the surrounding suspension and bodywork.

A short, careful road test is a good next step after installation. Listen for rubbing, feel for vibration, and recheck pressure after the tires have settled. On a performance car like the RS5, small fitment issues tend to show up quickly, so catching them early helps avoid unnecessary wear and gives a clearer picture of whether the full setup is working as intended.

Tires on a 2019 Audi RS5 should be inspected regularly, not just when tread looks low. Check them before longer drives and as part of routine maintenance for pressure loss, uneven wear, cuts, punctures, and sidewall damage. Low-profile performance tires can show issues quickly, so regular visual checks are especially worthwhile on this kind of wheel-and-tire package.

Inspection matters even more if the car is stored for stretches or driven seasonally. A vehicle that sits can develop pressure loss or age-related condition issues that are easy to miss until road use resumes. Looking over the tread, shoulders, and sidewalls, while also verifying pressure, is a simple way to protect both fitment and road manners.