The 2019 Aston Martin Vantage arrived as a compact modern grand touring sports car with sharper proportions, contemporary chassis tuning, and the kind of front-engine performance that depends heavily on a staggered tire setup. On this car, tire fitment centers on two radial sizes: 255/40R20 for the front and 295/35R20 for the rear, both on 20-inch wheels. That means the main decision is not choosing between multiple all-around sizes, but matching the correct front and rear fitment while comparing the available tire series and brand choices in each position. For owners focused on road use, appearance, or replacement after wheel changes, maintaining the proper staggered relationship is the key first step.
Which Tire Size Is Right for The 2019 Aston Martin Vantage
The 2019 Aston Martin Vantage uses two primary tire sizes, and they are position-specific rather than interchangeable. Both are radial tires on 20-inch rims, with 255/40R20 used at the front and 295/35R20 used at the rear. The first step is confirming whether you are replacing the front tires, the rear tires, or the complete staggered set so the car keeps its intended fitment balance.
255/40R20 is a modern metric radial size in which 255 is the nominal section width in millimeters, 40 is the aspect ratio, R identifies radial construction, and 20 is the wheel diameter in inches. On the 2019 Aston Martin Vantage, this is the front tire size and it works as part of the car's staggered setup. The available choice in this size uses a Blackwall sidewall from BFGoodrich in the g-Force Phenom T/A series. This size should be selected when the front axle fitment is being replaced and the owner wants to preserve the intended front-to-rear sizing relationship.
295/35R20 is also a modern metric radial size, with 295 indicating nominal section width in millimeters, 35 identifying the aspect ratio, and 20 showing the required wheel diameter in inches. On the 2019 Aston Martin Vantage, this is the rear tire size, giving the car a wider rear fitment than the front. The available option in this size is a Blackwall Nitto NT555 G2 radial. This is the size to evaluate when replacing rear tires and when confirming that any existing wheel changes have not altered the original staggered rear setup.
Sub-model fitment on the 2019 Aston Martin Vantage is straightforward, but it is split by axle position rather than by trim variation. Checking whether the tire is for the front or rear matters because this car uses a staggered setup with different sizes at each end.
1
2019 Aston Martin Vantage Base Front
The Base Front position uses the smaller of the two primary radial sizes and is part of the car's factory-style staggered arrangement. Front tire selection should stay focused on the correct front fitment, wheel compatibility, and maintaining balanced sizing with the rear tires already on the car.
The Base Rear position uses the wider rear radial size that completes the Vantage's staggered tire layout. Rear tire selection should account for the correct rear fitment first, then compare the available tire series and any wheel changes that could affect width or clearance.
The tire sizes listed on this page assume factory-standard vehicle configuration. The following modifications may affect tire fitment and are not reflected in this guide:
Suspension changes (lowering, lift kits, spring replacements)
Body alterations (fender modifications, custom bodywork)
If your vehicle has been modified from factory specifications, verify tire clearance before purchase.
Best 2019 Aston Martin Vantage Tires for Sale
Available 2019 Aston Martin Vantage tire choices are focused and position-specific, with BFGoodrich covering the 255/40R20 front fitment and Nitto covering the 295/35R20 rear fitment. Both are Blackwall radial tires, so the main comparison is by brand, tire series, and wheel-width compatibility where stated.
These FAQs focus on the staggered front and rear tire sizes used on the 2019 Aston Martin Vantage, along with rim fitment, tire selection, maintenance, and what to check before driving or replacing tires on a modified car.
Tire Size & Fitment
What tire size fits a 2019 Aston Martin Vantage?
The 2019 Aston Martin Vantage uses a staggered tire setup with 255/40R20 at the front and 295/35R20 at the rear. Both are radial tires designed for 20-inch wheels, so the car does not use one uniform size at all four corners.
That means the first step is identifying which axle needs replacement. A front tire should be matched to the front size and a rear tire should be matched to the rear size, while a full set should preserve the staggered relationship. If the car has aftermarket wheels or previous tire changes, confirm the actual wheel dimensions before ordering replacement tires.
What size rim does a 2019 Aston Martin Vantage use?
The 2019 Aston Martin Vantage uses 20-inch rims with both of its primary tire sizes. The front 255/40R20 and rear 295/35R20 fitments share the same wheel diameter, even though the tire widths and aspect ratios are different.
Shared rim diameter does not mean the front and rear tires are interchangeable. Width, profile, and wheel specifications still matter, especially on a staggered performance car. It is smart to verify the wheel width at each axle and make sure the tire being selected matches the intended front or rear position rather than assuming any 20-inch tire will work.
Why does the 2019 Aston Martin Vantage have more than one tire size?
The 2019 Aston Martin Vantage has more than one tire size because it uses a staggered setup. The front axle uses 255/40R20, while the rear axle uses 295/35R20, giving the car different tire widths front to rear within the same 20-inch wheel diameter.
For the owner, that means tire replacement should be handled by position. The front and rear tires each serve a specific fitment role, so size selection starts with the axle, not just the model name. Any wheel swap, suspension change, or prior owner modification makes it even more important to confirm what is actually on the car before replacing only one pair.
Choosing the Right Tire
What should I consider when choosing a 255/40R20 or 295/35R20 tire for a 2019 Aston Martin Vantage?
Start with the correct position-specific size, since the 2019 Aston Martin Vantage uses 255/40R20 at the front and 295/35R20 at the rear. Both fitments are radial and both require 20-inch wheels, so the core decision is matching the right size to the correct axle.
After that, compare the tire series, brand, sidewall style, and any stated wheel-width compatibility. The available options here are Blackwall radials from BFGoodrich and Nitto, each serving a different position on the car. If only two tires are being replaced, make sure the remaining pair still works sensibly with the new tires in size, condition, and intended use.
What sidewall styles are available for 2019 Aston Martin Vantage tires?
The available tire choices for the 2019 Aston Martin Vantage use a Blackwall sidewall style in both primary sizes. That applies to the 255/40R20 front fitment and the 295/35R20 rear fitment, so the visual presentation stays clean and contemporary across the staggered setup.
Since sidewall appearance is consistent here, the more meaningful comparisons become size position, tire series, and wheel compatibility. Owners who want to maintain the car's modern performance-oriented look may appreciate that straightforward Blackwall presentation. The main thing to avoid is choosing by appearance alone and overlooking the fact that the front and rear sizes are different.
What brands offer tires for the 2019 Aston Martin Vantage?
The available choices for the 2019 Aston Martin Vantage include BFGoodrich for the 255/40R20 front size and Nitto for the 295/35R20 rear size. Those options are offered in different tire series, with BFGoodrich using the g-Force Phenom T/A and Nitto using the NT555 G2.
Because each brand appears in a different axle position here, the buying decision is less about ranking brands and more about keeping the correct front and rear fitment. Check the exact size needed at each end of the car, then compare the series details and wheel-width requirements where stated. That approach keeps the selection focused on proper fitment rather than brand name alone.
Restoration & Appearance
Which tire should I choose for a period-style 2019 Aston Martin Vantage?
A 2019 Aston Martin Vantage is modern enough that the starting point is preserving its intended staggered radial fitment rather than recreating a vintage tire look. That means staying with 255/40R20 at the front and 295/35R20 at the rear, both on 20-inch wheels, while selecting from the available modern performance-oriented tire lines.
Appearance still matters, but on this car it is more about maintaining the correct stance and proportions than choosing a classic sidewall treatment. The available options use a Blackwall presentation, which suits the Vantage's contemporary design language. If exact visual authenticity matters after wheel or suspension changes, compare the car's current setup carefully before replacing only one axle.
Does correct tire fitment matter for a 2019 Aston Martin Vantage restoration?
Correct tire fitment matters on a 2019 Aston Martin Vantage because the car's appearance and overall setup rely on its staggered front and rear sizing. Using 255/40R20 in front and 295/35R20 in back helps preserve the visual balance intended by the original wheel-and-tire relationship.
Even on a newer collector car, incorrect tire sizing can change how the car sits and how the wheel openings are filled. A restoration-minded owner should confirm the actual wheel dimensions and avoid treating the front and rear fitments as interchangeable. Careful size matching is especially important if the car has seen aftermarket wheel changes or previous nonstandard tire replacements.
Fitment, Maintenance & Road Use
Can modifications affect tire fitment on a 2019 Aston Martin Vantage?
Yes, modifications can affect tire fitment on a 2019 Aston Martin Vantage. The car already uses a staggered 20-inch setup, so changes such as aftermarket wheels, altered wheel widths, suspension lowering, or body modifications can influence how a 255/40R20 front or 295/35R20 rear tire sits in the chassis.
A modified car should be checked for wheel diameter, wheel width, and clearance at full steering lock and suspension movement before replacement tires are chosen. Even when the nominal tire size stays the same, a different wheel package can change the real fitment picture. That is especially important when replacing only the front pair or only the rear pair.
What should I inspect before driving a 2019 Aston Martin Vantage on new tires?
Before driving a 2019 Aston Martin Vantage on new tires, inspect tire pressure, confirm that the correct front and rear sizes were installed, and look over the wheels for any visible damage or sealing issues. It is also wise to verify that the tires are mounted in the proper axle positions on the staggered setup.
A short visual check can prevent most avoidable problems. Look for sidewall damage, unusual bulges, air loss, and any sign of rubbing around the inner fender or suspension area. After a recent installation, recheck pressures and overall condition once the car has been driven briefly. That extra step is especially useful if the Vantage has aftermarket wheels or has been sitting for long periods.
How often should tires on a 2019 Aston Martin Vantage be inspected?
Tires on a 2019 Aston Martin Vantage should be inspected regularly, especially if the car is driven infrequently or stored for extended periods. A quick check before use and a more careful inspection at routine service intervals helps catch age-related issues, pressure loss, and damage before they become bigger problems.
Low-mileage collector cars can develop tire concerns even when tread looks good. Check for cracking, cuts, bulges, uneven wear, and any change in how the car sits or steers. Since the Vantage uses different front and rear sizes, inspect each axle with that staggered layout in mind. Consistent pressure and condition checks are just as important as selecting the right size.
