The 2019 Aston Martin DB11 blends grand touring comfort with the long-hood, high-speed character expected from a modern Aston Martin. Whether in Coupe, Volante, or AMR form, it is a car whose stance and road manners depend heavily on keeping the front and rear tire setup properly matched. This DB11 uses a staggered radial fitment with 255/40R20 up front and 295/35R20 at the rear on 20-inch rims. Available choices center on blackwall performance radials from BFGoodrich and Nitto rather than vintage-style construction changes. The key decision is confirming front versus rear position, then choosing the tire that best suits the car's current wheel setup and intended road use.
Which Tire Size Is Right for The 2019 Aston Martin DB11
The 2019 Aston Martin DB11 uses two primary tire sizes, and the fitment is position-specific rather than interchangeable. Both sizes are radial tires for 20-inch rims, with 255/40R20 used at the front and 295/35R20 at the rear across the covered DB11 configurations. The first step is confirming whether you are replacing a front or rear tire, then matching the tire to the wheel and the car's existing staggered setup.
255/40R20 is a modern metric radial size in which 255 identifies nominal section width in millimeters, 40 is the aspect ratio, R indicates radial construction, and 20 is the wheel diameter in inches. On the 2019 Aston Martin DB11, this is the front tire size and it plays a major role in steering feel and front-end response. Current choices in this size include a blackwall BFGoodrich g-Force Phenom T/A with a radial performance focus. This is the size to evaluate when replacing the DB11's front tires while keeping the staggered front-to-rear relationship intact.
295/35R20 is a modern metric radial size where 295 is the nominal section width in millimeters, 35 is the aspect ratio, R denotes radial construction, and 20 is the rim diameter in inches. On the 2019 Aston Martin DB11, this size is used at the rear, where wider rubber supports the car's planted stance and rear-drive character. Available options in this size include a blackwall Nitto NT555 G2 performance radial. This is the size to compare when replacing rear tires and preserving the DB11's intended staggered fitment.
DB11 sub-model fitment is straightforward in one sense and very important in another: the covered versions share the same staggered layout. Front positions use one size and rear positions use another, so tire selection depends on confirming both the sub-model and the axle position before ordering replacements.
1
2019 Aston Martin DB11 AMR Front
The 2019 Aston Martin DB11 AMR Front uses the DB11's front-position radial fitment on a 20-inch wheel. Tire selection here should focus on maintaining the correct front size and checking wheel compatibility so the AMR keeps its intended staggered balance with the rear.
The 2019 Aston Martin DB11 AMR Rear uses the wider rear-position radial fitment on a 20-inch wheel. Replacing this position means confirming the rear size specifically rather than assuming the front and rear are interchangeable on the AMR.
The 2019 Aston Martin DB11 Coupe Front uses the same front radial tire size found across the covered DB11 range. Choosing the right replacement means matching the front fitment correctly and preserving the Coupe's staggered front-to-rear tire setup.
The 2019 Aston Martin DB11 Coupe Rear uses the wider rear radial fitment on a 20-inch rim. Rear tire replacement should be handled as a position-specific choice, with attention paid to maintaining the proper staggered relationship with the front tires.
The 2019 Aston Martin DB11 Volante Front follows the same front tire arrangement as the other covered DB11 variants. Tire selection should center on the proper front size, wheel compatibility, and consistency with the car's existing staggered radial setup.
The 2019 Aston Martin DB11 Volante Rear uses the wider rear tire size that completes the DB11's staggered fitment. Choosing a replacement for this position means verifying the rear application specifically and checking that the tire matches the wheel and overall setup.
The tire sizes listed on this page assume factory-standard vehicle configuration. The following modifications may affect tire fitment and are not reflected in this guide:
Suspension changes (lowering, lift kits, spring replacements)
Body alterations (fender modifications, custom bodywork)
If your vehicle has been modified from factory specifications, verify tire clearance before purchase.
Best 2019 Aston Martin DB11 Tires for Sale
Available 2019 Aston Martin DB11 tire choices center on the staggered 20-inch radial sizes, with BFGoodrich offered for the 255/40R20 front and Nitto for the 295/35R20 rear. The current selection is focused on blackwall performance-oriented tire series rather than multiple sidewall treatments.
These FAQs focus on the 2019 Aston Martin DB11's staggered tire sizing, 20-inch rim fitment, front-versus-rear replacement, available radial choices, and the checks worth making before road use on a modern grand touring car.
Tire Size & Fitment
What tire size fits a 2019 Aston Martin DB11?
The 2019 Aston Martin DB11 uses a staggered tire setup with 255/40R20 at the front and 295/35R20 at the rear. Both are radial tire sizes for 20-inch rims, and that front-to-rear difference applies across the covered DB11 configurations, including Coupe, Volante, and AMR positions.
That means the first question is not simply whether the tire is for a DB11, but whether it is for the front or rear axle. A staggered setup should be matched carefully, especially if the car has aftermarket wheels or a mixed set from a previous owner, since wheel width and overall clearance still need to line up with the tire being installed.
What size rim does a 2019 Aston Martin DB11 use?
The 2019 Aston Martin DB11 uses 20-inch rims with both of its primary tire sizes. The front 255/40R20 and rear 295/35R20 are both built around a 20-inch wheel diameter, so the rim diameter remains consistent even though the front and rear tire widths differ.
Rim diameter is only one part of the fitment picture on a staggered car like the DB11. Wheel width also matters, and the front tire offerings in this fitment show their own rim-width compatibility range, so it is worth confirming the actual wheels on the car before replacement, especially if the original wheels have been changed or refinished over time.
Do all 2019 Aston Martin DB11 sub-models use the same tire size?
The covered 2019 Aston Martin DB11 sub-models share the same overall staggered tire arrangement rather than one identical size at all four corners. AMR, Coupe, and Volante all use 255/40R20 at the front and 295/35R20 at the rear, so the pattern is consistent across the range.
The practical takeaway is that sub-model choice matters less than axle position for routine replacement. Front and rear tires serve different locations, and ordering by model name alone can lead to the wrong size if the tire's position is not confirmed first. Checking the existing tire sidewall and wheel setup is a smart final step before selecting a replacement.
Choosing the Right Tire
What should I consider when choosing a 255/40R20 or 295/35R20 tire for a 2019 Aston Martin DB11?
Start with the correct axle position, since the 2019 Aston Martin DB11 uses 255/40R20 in front and 295/35R20 in the rear. From there, compare radial construction, wheel compatibility, load-related specifications when shown, tire weight where relevant, and the overall character of the tire series offered in each size.
This DB11 selection is less about appearance variations and more about matching the car's staggered performance-oriented setup. A useful approach is to confirm the wheel dimensions already on the car, decide whether you are replacing a single axle or a full set, and keep the front and rear pairing consistent so the DB11 retains balanced steering and rear traction behavior.
What sidewall styles are available for 2019 Aston Martin DB11 tires?
The available tire choices for the 2019 Aston Martin DB11 use a blackwall sidewall style in both primary sizes. That applies to the current front and rear product selection, so the visual presentation stays clean and modern rather than moving into whitewall, redline, or other classic-style sidewall treatments.
For a DB11, that blackwall look suits the car's contemporary grand touring design and keeps the focus on wheel design and stance. Since sidewall styling is not the main differentiator here, selection usually comes down to getting the correct front or rear size, confirming wheel compatibility, and comparing the available tire series for the position you are replacing.
What brands offer tires for the 2019 Aston Martin DB11?
Current 2019 Aston Martin DB11 tire choices in the covered sizes include BFGoodrich for the 255/40R20 front fitment and Nitto for the 295/35R20 rear fitment. Those are separate size-specific offerings, so brand choice is tied to the position on the car rather than several brands competing within one identical fitment.
That makes it especially important to approach the DB11 as a staggered application. A front replacement means evaluating the BFGoodrich option in the correct size, while a rear replacement means comparing the Nitto rear fitment. On cars with non-original wheels or previously mixed tires, confirming the existing setup helps avoid choosing the right brand in the wrong position.
Fitment, Maintenance & Road Use
Can modifications affect tire fitment on a 2019 Aston Martin DB11?
Yes. The 2019 Aston Martin DB11 already uses a staggered 20-inch setup, so changes such as aftermarket wheels, altered wheel widths, suspension lowering, spacer use, or body modifications can affect how a 255/40R20 front or 295/35R20 rear tire fits the car.
Even when the sidewall size matches, a modified wheel or suspension package can change inner clearance, fender clearance, and the way the tire sits under load or steering input. A careful owner should confirm the actual wheel dimensions on the car, inspect for any rubbing marks, and make sure the replacement tire matches the modified setup rather than assuming stock dimensions are still in place.
What should I inspect before driving a 2019 Aston Martin DB11 on new tires?
Before road use, inspect tire pressure, bead seating, visible sidewall condition, tread surface, valve stems, and wheel condition on the 2019 Aston Martin DB11. It is also wise to confirm that the front tires are the correct 255/40R20 size and the rears are the proper 295/35R20 size after installation.
A short, careful test drive can reveal vibration, pulling, or clearance issues that may not appear while the car is stationary. Since the DB11 uses different sizes front and rear, checking each corner matters more than on a square setup. Looking over the suspension and alignment condition at the same time can also help protect the new tires from uneven wear.
How often should tires on a 2019 Aston Martin DB11 be inspected?
Tires on a 2019 Aston Martin DB11 should be inspected regularly, not just when tread looks low. A performance-oriented grand touring car with staggered tires benefits from routine checks for pressure loss, uneven wear, cuts, bulges, and sidewall damage, especially if the car sees seasonal use or long periods parked between drives.
A good habit is to inspect the tires before longer drives and whenever the car's behavior changes, such as vibration or steering pull. The front and rear tires do different jobs on the DB11, so wear patterns may not match. Keeping an eye on both axle positions separately helps catch alignment, wheel, or suspension issues before they shorten tire life.
