The 2018 Ferrari GTC4Lusso T blends grand touring comfort with the long-hood, shooting-brake character that sets this Ferrari apart from more conventional GT cars. Its turbocharged V8 configuration gives the car a distinct place in the modern Ferrari lineup, and tire fitment plays a major role in preserving its balance and stance. This model uses a staggered radial setup with 245/35R20 in front and 295/35R20 in the rear. Available choices stay within a modern performance-focused range, with blackwall designs from BFGoodrich and Nitto across several series. The key decision is matching the correct front and rear sizes while confirming wheel fitment and intended road use.
Which Tire Size Is Right for The 2018 Ferrari GTC4Lusso T
The 2018 Ferrari GTC4Lusso T uses two primary tire sizes, with a staggered setup that places one size on the front axle and a wider size on the rear. Both are radial tires on 20-inch wheels, so the first step is confirming whether you are replacing the front tires, the rear tires, or the full set while keeping the correct axle-specific sizing intact.
245/35R20 is a modern metric radial size in which 245 refers to nominal section width in millimeters, 35 is the aspect ratio, and 20 is the wheel diameter in inches. On the 2018 Ferrari GTC4Lusso T, this size is used at the front, where maintaining the intended steering response and overall balance matters. Available choices include blackwall performance tires from BFGoodrich and Nitto, with series such as g-Force Sport Comp 2, g-Force Comp 2 AS, g-Force Phenom T/A, and NT555 G2. This is the size to evaluate when replacing the front axle tires and confirming wheel-width compatibility.
295/35R20 is a modern metric radial size with a substantially wider section than the front tire, while keeping the same 20-inch wheel diameter. On the 2018 Ferrari GTC4Lusso T, this size belongs on the rear, where the staggered fitment supports the car's intended traction and visual proportion. The available product choice in this size is a blackwall Nitto NT555 G2, giving the rear axle a clearly performance-oriented replacement path. This is the correct size to confirm before ordering rear tires, especially on a car that may already have wheel or suspension changes.
Fitment on the 2018 Ferrari GTC4Lusso T is straightforward because the covered configurations use the same staggered front and rear tire sizing. Checking the exact front or rear position still matters, since tire selection depends on matching the correct axle-specific size rather than treating the car as a square setup.
1
2018 Ferrari GTC4Lusso T (Michelin Tires) Front
This front-position configuration uses the same 245/35R20 radial sizing as the standard front fitment. The practical decision is choosing among the available front-tire series while keeping the correct 20-inch wheel fitment and axle position in mind.
This rear-position configuration uses 295/35R20 radial tires, matching the standard rear fitment for the model. Tire selection here centers on preserving the wider rear setup and confirming that the wheel and vehicle still retain the proper staggered arrangement.
The Base Front configuration uses 245/35R20 radial tires on a 20-inch wheel. That keeps front fitment simple, but the replacement still needs to be chosen as a front-axle tire rather than as part of a same-size setup all around.
The Base Rear configuration uses the wider 295/35R20 radial size on a 20-inch wheel. Keeping that rear size in place is important when replacing tires, especially if the car's wheels, ride height, or alignment settings have been changed.
The tire sizes listed on this page assume factory-standard vehicle configuration. The following modifications may affect tire fitment and are not reflected in this guide:
Suspension changes (lowering, lift kits, spring replacements)
Body alterations (fender modifications, custom bodywork)
If your vehicle has been modified from factory specifications, verify tire clearance before purchase.
Best 2018 Ferrari GTC4Lusso T Tires for Sale
Available 2018 Ferrari GTC4Lusso T tire choices focus on modern radial blackwall performance tires in the correct staggered 20-inch sizes. Front fitment includes BFGoodrich and Nitto options across several g-Force and NT555 G2 series, while the rear size is available in Nitto NT555 G2.
These FAQs focus on the exact front and rear tire sizes used on the 2018 Ferrari GTC4Lusso T, along with rim fitment, product selection, staggered setup concerns, and the checks worth making before road use.
Tire Size & Fitment
What tire size fits a 2018 Ferrari GTC4Lusso T?
The 2018 Ferrari GTC4Lusso T uses a staggered tire setup, with 245/35R20 on the front and 295/35R20 on the rear. Both sizes are radial tires mounted on 20-inch wheels, so the car does not use the same tire size at all four corners.
That means the first fitment question is axle position rather than simply year and model. A buyer replacing only two tires should confirm whether the car needs fronts or rears, and anyone replacing a full set should keep the staggered sizing intact unless the wheel package has been changed and the setup has been carefully re-verified.
What size rim does a 2018 Ferrari GTC4Lusso T use?
Both primary tire sizes for the 2018 Ferrari GTC4Lusso T use a 20-inch rim diameter. The front 245/35R20 and rear 295/35R20 share that wheel diameter, even though the rear tire is substantially wider than the front.
Rim diameter is only part of the fitment picture, so it is still important to check wheel width before choosing a replacement tire. That matters most on the front size, where available products include wheel-width guidance, and it also matters on any car that has aftermarket wheels or a non-original wheel package.
Do all 2018 Ferrari GTC4Lusso T sub-models use the same tire size?
The covered 2018 Ferrari GTC4Lusso T configurations use the same staggered sizing pattern: 245/35R20 in front and 295/35R20 in the rear. That includes both the Base front and rear positions and the Michelin Tires front and rear positions.
The main point to verify is position on the car, since the front and rear sizes are different by design. Even when the sub-model naming stays consistent, tire selection still depends on matching the correct axle, preserving the intended staggered arrangement, and checking whether the car remains on its expected wheel setup.
Choosing the Right Tire
What should I consider when choosing a 245/35R20 tire for a 2018 Ferrari GTC4Lusso T?
For the 2018 Ferrari GTC4Lusso T, a 245/35R20 tire belongs on the front axle, so the first priorities are correct size, radial construction, and 20-inch wheel compatibility. Available front choices include blackwall performance tires from BFGoodrich and Nitto across several different series.
The next step is comparing the front tires by product character and wheel-width suitability rather than by size alone. Some front options include an 8.0 to 9.5 inch rim-width range, and one also includes a maximum load figure of 1521 lbs at 50 psi, which can help when comparing specifications within the correct size.
What brands offer tires for the 2018 Ferrari GTC4Lusso T?
Tires for the 2018 Ferrari GTC4Lusso T are available from BFGoodrich and Nitto in the applicable sizes. BFGoodrich appears in the 245/35R20 front size, while Nitto appears in both the 245/35R20 front and 295/35R20 rear sizes.
That brand spread matters because the front axle offers broader comparison shopping than the rear. A buyer choosing a full set may need to consider whether matching brand and series across both axles is important, or whether the goal is simply staying within the correct front and rear sizes with products that suit the car's use.
What tire series are available for the 2018 Ferrari GTC4Lusso T?
The 2018 Ferrari GTC4Lusso T is offered with several tire series in its front size, including BFGoodrich g-Force Sport Comp 2, BFGoodrich g-Force Comp 2 AS, BFGoodrich g-Force Phenom T/A, and Nitto NT555 G2. The rear 295/35R20 size is available in Nitto NT555 G2.
Series choice helps separate the available tires by intended character within the correct fitment, especially on the front axle where there is more variety. It is worth comparing the exact series alongside wheel-width guidance, sidewall presentation, and any published load or weight details instead of choosing only by brand name.
Restoration & Appearance
Which tire should I choose for a period-style 2018 Ferrari GTC4Lusso T?
A period-style approach for a 2018 Ferrari GTC4Lusso T still starts with the correct modern staggered sizing: 245/35R20 in front and 295/35R20 in the rear. Since this is a contemporary grand touring Ferrari, the available radial blackwall tires already align more naturally with the car's original-era visual character than vintage-style sidewall treatments would.
The appearance decision is less about whitewalls or stripes and more about preserving the proper low-profile, staggered performance look. Keeping the correct front and rear proportions, matching wheel diameter, and avoiding size substitutions that alter the car's stance usually matters more than chasing a decorative sidewall effect on a modern Ferrari.
Does correct tire fitment matter for a 2018 Ferrari GTC4Lusso T restoration?
Correct tire fitment matters on a 2018 Ferrari GTC4Lusso T because the car's stance, wheel-fill, and front-to-rear proportion are tied directly to its staggered 245/35R20 and 295/35R20 setup. Even on a newer collector car, using the wrong axle size can change the visual balance as well as the practical fitment.
Anyone aiming for a restoration-oriented result should treat the tire size as part of the car's overall presentation, not just a consumable replacement. If exact originality is especially important, it is worth comparing the current wheel and tire package against marque-specific references and then selecting a tire that preserves the intended size, construction, and appearance.
Fitment, Maintenance & Road Use
Can modifications affect tire fitment on a 2018 Ferrari GTC4Lusso T?
Yes, modifications can affect tire fitment on a 2018 Ferrari GTC4Lusso T, even when the replacement tires remain in the correct front and rear sizes. Changes to wheel width, wheel offset, suspension height, alignment, or body clearance can all influence how a 245/35R20 front or 295/35R20 rear tire sits and operates on the car.
That is why a modified car should be checked as an actual setup rather than by year and model alone. Confirm the 20-inch wheel diameter, verify the wheel widths, and inspect steering and fender clearance before installation, especially if the car has aftermarket wheels, lowering changes, or any suspension work that may alter available space.
What should I inspect before driving a 2018 Ferrari GTC4Lusso T on new tires?
Before driving a 2018 Ferrari GTC4Lusso T on new tires, inspect the basics that affect both fitment and safe road use: correct front and rear placement, proper inflation, wheel condition, valve stems, and visible clearance around the suspension and body. It also helps to confirm that each tire matches the intended axle position in the staggered setup.
A short initial road check is smart after installation, especially on a high-performance GT car. Listen for rubbing, note any steering pull or vibration, and recheck pressure after the tires have settled in. Uneven wear patterns or air loss should be addressed early instead of being treated as normal break-in behavior.
What should I check before a longer drive in a 2018 Ferrari GTC4Lusso T?
Before a longer drive in a 2018 Ferrari GTC4Lusso T, verify that the front 245/35R20 and rear 295/35R20 tires are in good condition, properly inflated, and free from cuts, bulges, or abnormal wear. A longer trip also makes it worthwhile to inspect tread condition and make sure there has been no recent air loss.
Collector and specialty cars sometimes cover low mileage, so age and storage condition deserve attention alongside tread depth. Tires that have sat for extended periods should be checked closely for sidewall cracking and general hardening, and the wheels should be inspected for damage or corrosion before relying on the car for sustained highway use.
