The 2017 Hyundai Trucks Santa Fe sits in the modern crossover era, where buyers expected family space, everyday comfort, and a more refined road feel than traditional truck-based utility vehicles. That makes tire selection less about vintage construction choices and more about matching the exact trim and wheel package on the vehicle. This Santa Fe uses either 235/60R18 or 235/55R19 radial tires, depending on sub-model. The choice centers on confirming whether the vehicle carries the 18-inch or 19-inch setup. Once that is settled, the focus shifts to maintaining the intended ride, clearance, and overall stance with the proper size.
Which Tire Size Is Right for The 2017 Hyundai Trucks Santa Fe
The 2017 Hyundai Trucks Santa Fe uses two primary tire sizes, and the difference comes down to sub-model and wheel diameter. Both fitments are radial, but one is built around an 18-inch rim and the other around a 19-inch rim, so the first step is confirming the exact trim and the wheels currently on the vehicle before selecting a tire.
235/60R18 is a metric radial size in which 235 identifies nominal section width in millimeters, 60 is the aspect ratio, R denotes radial construction, and 18 is the rim diameter in inches. On the 2017 Hyundai Trucks Santa Fe, this size belongs to the 18-inch wheel setup rather than the 19-inch fitment used on other trims. With an overall diameter of 29.1 inches and a section width of 9.25 inches, it gives you a solid reference point for replacement planning. This is the size to evaluate when the vehicle carries the correct 18-inch wheel package.
235/55R19 is also a metric radial size, with the same 235-millimeter nominal section width but a lower 55-series profile and a 19-inch rim diameter. For the 2017 Hyundai Trucks Santa Fe, this size is tied to the 19-inch wheel configuration used on specific upper trims. Its overall diameter is 29.18 inches with a 9.25-inch section width, so it stays close in height while matching a different wheel. This is the fitment to confirm when the vehicle is equipped with the proper 19-inch rims and corresponding trim package.
Sub-model matters on the 2017 Hyundai Trucks Santa Fe because tire fitment splits between 18-inch and 19-inch wheel packages. Identifying the exact trim is the quickest way to narrow the correct size before comparing replacement tires.
1
2017 Hyundai Trucks Santa Fe Limited
The 2017 Hyundai Trucks Santa Fe Limited uses the 235/60R18 radial fitment. Tire selection here starts with confirming the 18-inch wheel setup, then choosing a replacement that preserves the intended overall dimensions and everyday road manners.
The 2017 Hyundai Trucks Santa Fe Limited Ultimate uses the 235/55R19 radial size. That makes wheel confirmation especially important, since this trim moves to the 19-inch package and should be matched with the correct rim diameter before purchase.
The 2017 Hyundai Trucks Santa Fe SE uses the 235/60R18 radial fitment. For this sub-model, the practical decision is staying with the proper 18-inch size and checking that the current wheels have not been changed from the original-style setup.
The 2017 Hyundai Trucks Santa Fe SE Ultimate uses the 235/55R19 radial fitment. Buyers should confirm that the vehicle still carries its 19-inch wheel package, especially if it has seen wheel upgrades or replacement wheels over time.
The tire sizes listed on this page assume factory-standard vehicle configuration. The following modifications may affect tire fitment and are not reflected in this guide:
Suspension changes (lowering, lift kits, spring replacements)
Body alterations (fender modifications, custom bodywork)
If your vehicle has been modified from factory specifications, verify tire clearance before purchase.
Frequently Asked Questions
Common questions for the 2017 Hyundai Trucks Santa Fe usually center on the correct trim-based tire size, 18-inch versus 19-inch wheel fitment, and what to inspect before putting the vehicle back into regular road use.
Tire Size & Fitment
What tire size fits a 2017 Hyundai Trucks Santa Fe?
The 2017 Hyundai Trucks Santa Fe uses either 235/60R18 or 235/55R19 tires. Both are radial sizes, but they do not apply across every Santa Fe trim, so the correct choice depends on the specific sub-model and wheel package on the vehicle.
Limited and SE models use 235/60R18, while Limited Ultimate and SE Ultimate use 235/55R19. The practical step is to confirm the exact trim and then verify the wheel diameter actually on the vehicle, especially if wheels have been changed since new.
What size rim does a 2017 Hyundai Trucks Santa Fe use?
A 2017 Hyundai Trucks Santa Fe uses either an 18-inch or 19-inch rim, depending on the sub-model. The 235/60R18 fitment is built around an 18-inch rim, while the 235/55R19 fitment is built around a 19-inch rim.
That difference is important because tire size and wheel diameter must match exactly. Checking the trim name is helpful, but the safest move is to confirm the wheel itself before selecting tires, particularly on vehicles that may have aftermarket wheels or replacement factory-style rims.
Do all 2017 Hyundai Trucks Santa Fe sub-models use the same tire size?
No, the 2017 Hyundai Trucks Santa Fe does not use one tire size across every sub-model. SE and Limited models use 235/60R18, while SE Ultimate and Limited Ultimate models use 235/55R19.
That means tire selection starts with trim identification rather than assuming every Santa Fe uses the same fitment. Since the two sizes also use different rim diameters, the vehicle should be checked for its actual wheel setup before replacing tires or comparing options.
Choosing the Right Tire
What should I consider when choosing a tire for a 2017 Hyundai Trucks Santa Fe?
Start with the exact tire size that matches the Santa Fe's trim and wheel diameter. On this vehicle, that means confirming whether it uses 235/60R18 or 235/55R19, since both are correct fitments but for different configurations.
After size confirmation, compare the tire's overall dimensions against the vehicle's current setup and make sure the wheel diameter is correct. It also helps to inspect whether the Santa Fe still has its original wheel package, because replacement wheels can change the fitment decision.
How do I choose between the available 2017 Hyundai Trucks Santa Fe tire sizes?
You do not choose between 235/60R18 and 235/55R19 based on preference alone, because each size belongs to a specific Santa Fe trim and wheel package. The real choice is identifying which setup is on the vehicle and staying with that correct size.
The two fitments are close in overall diameter, but they are designed for different rim diameters, so they are not interchangeable without checking the wheel itself. Looking at the trim badge, existing tire sidewall, and actual rim size will usually settle the question quickly.
What tire series factors matter when replacing tires on a 2017 Hyundai Trucks Santa Fe?
For a 2017 Hyundai Trucks Santa Fe, the first series-related factor is the size's aspect ratio. The vehicle uses either a 60-series 235/60R18 tire or a 55-series 235/55R19 tire, depending on trim, and that profile is part of the intended fitment.
Keeping the correct aspect ratio helps preserve the wheel-to-tire relationship the vehicle was built around. A buyer should verify the full size code rather than focusing only on the 235 width, since the 55- or 60-series profile and the 18- or 19-inch rim are both essential.
Restoration & Appearance
Does correct tire fitment matter for a 2017 Hyundai Trucks Santa Fe restoration?
Yes, correct tire fitment still matters on a 2017 Hyundai Trucks Santa Fe even though it is a newer vehicle than a traditional collector car. Using the proper 235/60R18 or 235/55R19 size helps maintain the stance, wheel fill, and trim-specific appearance the vehicle was designed around.
Appearance concerns on a modern crossover usually center on keeping the wheel and tire proportions appropriate to the sub-model. Anyone aiming for an original-style presentation should confirm the trim, verify the rim diameter, and avoid assuming that any 235-width tire will look right.
How does tire size affect the appearance of a 2017 Hyundai Trucks Santa Fe?
Tire size has a visible effect on how a 2017 Hyundai Trucks Santa Fe sits because the vehicle uses either an 18-inch wheel with 235/60R18 tires or a 19-inch wheel with 235/55R19 tires. Each combination creates a slightly different sidewall-to-wheel balance.
That means appearance and fitment are tied together rather than separate decisions. Staying with the size intended for the specific trim helps the Santa Fe keep its proper visual proportion, while any wheel change should be checked carefully for overall diameter and wheel compatibility.
Fitment, Maintenance & Road Use
Can modifications affect tire fitment on a 2017 Hyundai Trucks Santa Fe?
Yes, modifications can affect tire fitment on a 2017 Hyundai Trucks Santa Fe. Wheel changes, altered offsets, suspension lowering, and other setup changes can all influence whether the correct trim-based tire size still has proper clearance and wheel compatibility.
A Santa Fe with non-original wheels should be checked carefully before replacement tires are chosen by size alone. Verifying actual rim diameter is the first step, followed by checking steering clearance, fender clearance, and whether the vehicle still matches its original fitment assumptions.
What should I inspect before driving a 2017 Hyundai Trucks Santa Fe on new tires?
Before driving a 2017 Hyundai Trucks Santa Fe on new tires, inspect the wheels for correct diameter, visible damage, and proper tire seating. It is also smart to check alignment condition, inflation pressure, and whether the replacement size matches the vehicle's trim and wheel package.
Road use should begin with a quick look for rubbing at full steering lock and enough clearance around the fenders and suspension. A vehicle that has been sitting should also be checked for uneven wear, air loss, or suspension issues that could affect how the new tires behave.
How often should tires on a 2017 Hyundai Trucks Santa Fe be inspected?
Tires on a 2017 Hyundai Trucks Santa Fe should be inspected regularly, not just when tread appears low. Routine checks should include air pressure, tread wear pattern, sidewall condition, and confirmation that all four tires remain the correct size for the vehicle's trim and wheel setup.
Modern crossovers can hide fitment problems until wear becomes obvious, so periodic inspection is worthwhile even when the vehicle feels normal on the road. Checking before longer trips is especially useful, along with watching for cuts, bulges, cracking, or signs of slow air loss.
