The 2017 Ferrari F12tdf sits at the sharp end of Ferrari’s front-engine V12 grand touring lineage, blending track-focused intent with the long-hood proportions and high-speed character collectors expect from a modern limited-production Ferrari. Tire fitment on this car is purpose-built, with a staggered radial setup using 275/35R20 in front and 315/35R20 in the rear on 20-inch wheels. That makes the decision less about discovering the size and more about choosing the right construction details, sidewall presentation, and product series within the correct front-and-rear pairing. For an F12tdf, tire selection should respect both the car’s visual stance and the wheel, clearance, and handling balance built into the staggered setup.
Which Tire Size Is Right for The 2017 Ferrari F12tdf
The 2017 Ferrari F12tdf uses two primary tire sizes, and they are position-specific rather than interchangeable. Both are radial tires on 20-inch wheels, with 275/35R20 used at the front and 315/35R20 at the rear, so the first step is confirming which axle you are replacing. Once that is established, the decision shifts to comparing available product series, sidewall styles, and wheel-width compatibility within the correct size.
The 275/35R20 size is a metric radial format that identifies a 275-millimeter nominal section width, a 35-series aspect ratio, radial construction, and fitment for a 20-inch rim. On the 2017 Ferrari F12tdf, this is the front tire size and forms part of the car’s staggered setup. Available choices include BFGoodrich, Nitto, and Pro-Trac, with Blackwall, raised white letter, and Redline sidewall treatments across series such as g-Force Comp 2 AS, g-Force Phenom T/A, Street Pro III, and NT555 G2. This size matters when maintaining the intended front-end fitment, appearance, and wheel compatibility on the front axle.
The 315/35R20 size is also a metric radial, with a 315-millimeter nominal section width, a 35-series profile, radial construction, and a 20-inch rim diameter. On the 2017 Ferrari F12tdf, this size is used at the rear, where it completes the staggered front-and-rear fitment. The available product range here centers on the Nitto NT555 G2 in a Blackwall presentation, so the selection question is more focused than it is at the front. Choosing this size correctly is essential to preserving the car’s rear-wheel fitment and keeping the tire package matched to the intended axle position.
Sub-model fitment on the 2017 Ferrari F12tdf is straightforward, but it is split by axle position rather than trim variation. Checking whether you are replacing the front or rear tires matters because each position uses its own dedicated size on the same 20-inch rim diameter.
1
2017 Ferrari F12tdf Base Front
The 2017 Ferrari F12tdf Base Front uses the 275/35R20 radial tire size. That means front tire selection centers on staying with the correct axle-specific size while comparing available brands, series, and sidewall treatments that suit the car’s intended look and use.
The 2017 Ferrari F12tdf Base Rear uses the 315/35R20 radial tire size. Rear tire selection is therefore about matching the dedicated rear fitment and confirming the wheel setup remains stock or otherwise compatible before changing brands or product series.
The tire sizes listed on this page assume factory-standard vehicle configuration. The following modifications may affect tire fitment and are not reflected in this guide:
Suspension changes (lowering, lift kits, spring replacements)
Body alterations (fender modifications, custom bodywork)
If your vehicle has been modified from factory specifications, verify tire clearance before purchase.
Best 2017 Ferrari F12tdf Tires for Sale
Available 2017 Ferrari F12tdf tire choices span BFGoodrich, Nitto, and Pro-Trac in the front 275/35R20 size, with Blackwall, raised white letter, and Redline sidewall styles across several radial series. The rear 315/35R20 fitment is more focused, centered on a Blackwall Nitto NT555 G2.
For the 2017 Ferrari F12tdf, the key questions center on staggered front and rear sizing, 20-inch rim fitment, product-series differences, sidewall appearance, and the checks worth making before road use on a low-production high-performance Ferrari.
Tire Size & Fitment
What tire size fits a 2017 Ferrari F12tdf?
The 2017 Ferrari F12tdf uses a staggered radial setup with 275/35R20 at the front and 315/35R20 at the rear. Both sizes mount on 20-inch wheels, but they serve different axle positions and should not be treated as a single universal fitment for the car.
That means the first question is whether you are replacing front tires, rear tires, or the full set. Matching the correct axle-specific size helps preserve the intended stance and fitment relationship, while any car with aftermarket wheels or suspension changes should have wheel width and clearance checked before selecting replacement tires.
What size rim does a 2017 Ferrari F12tdf use?
The primary tire sizes for the 2017 Ferrari F12tdf are built around a 20-inch rim diameter. Both the 275/35R20 front size and the 315/35R20 rear size use that same wheel diameter, even though the two tires differ substantially in width.
Rim diameter is only one part of the fitment picture, so it is still important to confirm the actual wheel setup on the car. A modified F12tdf may have different wheel widths or offsets, and those changes can affect which tires are appropriate and how much clearance remains at the fender and suspension.
Why does the 2017 Ferrari F12tdf have more than one tire size?
The 2017 Ferrari F12tdf uses more than one tire size because it has a staggered setup: 275/35R20 in front and 315/35R20 in the rear. This is a position-specific arrangement rather than a trim-level variation, with each size assigned to a different end of the car.
For tire replacement, that means the correct choice depends on location, not just year, make, and model. Buyers should identify whether they need front or rear tires and verify that the car still wears the intended wheel arrangement, especially if it has seen aftermarket wheel changes or other setup alterations.
Choosing the Right Tire
What should I consider when choosing a 275/35R20 and 315/35R20 tire set for a 2017 Ferrari F12tdf?
Start with the correct staggered fitment: 275/35R20 for the front and 315/35R20 for the rear. From there, compare available radial product series, sidewall presentation, and any wheel-width guidance that applies to the front size, especially if the car is not on its original wheel package.
The front size offers more variety than the rear, so the full set may involve balancing appearance choices with the need to keep the rear fitment properly matched. A buyer focused on road use, show presentation, or a traditional muscle-era sidewall look will weigh those details differently than someone simply replacing worn tires.
What sidewall styles are available for 2017 Ferrari F12tdf tires?
Sidewall style depends on size, with the front 275/35R20 fitment offering Blackwall, raised white letter, and Redline options. The rear 315/35R20 fitment is more limited, centered on a Blackwall presentation, so sidewall styling flexibility is concentrated at the front axle.
That matters if visual consistency is part of the goal, especially on a car with a strong stance and highly visible wheel-and-tire package. Before choosing a non-Blackwall front tire, it is worth considering how the sidewall treatment will pair with the available rear option and with the overall presentation of the car.
What brands offer tires for the 2017 Ferrari F12tdf?
The available tire brands for the 2017 Ferrari F12tdf include BFGoodrich, Nitto, and Pro-Trac. BFGoodrich, Nitto, and Pro-Trac appear in the 275/35R20 front fitment, while the 315/35R20 rear fitment is represented by Nitto in the NT555 G2 series.
Brand choice should still be filtered through the correct axle position, tire size, and the type of look you want from the finished setup. On this car, the front size gives more room to compare series and sidewall styles, while the rear size is a more focused fitment decision tied closely to maintaining the staggered arrangement.
Restoration & Appearance
Which tire should I choose for a period-style 2017 Ferrari F12tdf?
A period-style approach for a 2017 Ferrari F12tdf still begins with the correct staggered modern radial sizes: 275/35R20 front and 315/35R20 rear. Within that framework, the front fitment offers the broadest appearance choices through different series and sidewall treatments, while the rear remains more restrained.
Because this is a recent high-performance Ferrari rather than an earlier bias-ply-era collector car, appearance decisions tend to revolve around sidewall presentation more than construction style. The most convincing result usually comes from preserving the intended front-and-rear proportions and making sure any visual choice still leaves the overall set balanced.
How does tire construction affect the appearance of a restored 2017 Ferrari F12tdf?
Construction is less of a visual dividing line here because the 2017 Ferrari F12tdf uses modern radial tires at both ends of the car. The more noticeable appearance differences come from sidewall style, branding, and tire-series presentation within the correct front and rear sizes.
For a restoration-minded owner, that means the visual result depends more on keeping the staggered proportions and selecting a sidewall treatment that suits the car’s character. A clean Blackwall look will read differently than raised white letters or a Redline accent, even when the core fitment remains correct.
Fitment, Maintenance & Road Use
Can modifications affect tire fitment on a 2017 Ferrari F12tdf?
Yes. Even though the 2017 Ferrari F12tdf uses 275/35R20 front and 315/35R20 rear on 20-inch rims, aftermarket wheel changes, altered offsets, suspension modifications, or ride-height adjustments can change how much room the tires have at the fenders and suspension components.
A car that remains on its intended wheel package is a much simpler tire-selection case than one that has been modified. Before changing brands or replacing only part of the set, confirm actual wheel width, axle position, and available clearance so the new tires match the car’s real-world setup rather than assumptions.
What should I inspect before driving a 2017 Ferrari F12tdf on new tires?
Check that the front tires are 275/35R20 and the rear tires are 315/35R20, and confirm they are mounted on the correct 20-inch wheels. It is also worth inspecting inflation pressure, valve stems, tread condition, and the sidewalls for cuts, bulges, or damage before putting the car back into regular road use.
A careful walkaround should also include looking for rubbing marks, uneven wear, or signs that the car’s alignment or suspension needs attention. On a high-performance collector vehicle, those small checks matter because they help catch fitment or condition issues early, before they affect drivability or tire life.
How should tires on a 2017 Ferrari F12tdf be maintained?
Tires on a 2017 Ferrari F12tdf should be maintained with regular pressure checks, routine visual inspection, and close attention to tread and sidewall condition. Because the car uses a staggered setup, maintenance also means keeping front and rear sizes in their proper positions rather than treating the set as interchangeable.
Low-use exotic cars deserve extra attention because age and storage conditions can matter as much as mileage. Keeping the car away from prolonged sun, heat, moisture, and ozone sources helps protect the tires, and any sign of cracking, repeated air loss, or impact damage should be evaluated before a longer drive.
