The 2017 Dodge Viper stands at the end of a distinctly American supercar line, with massive grip, dramatic proportions, and a chassis that demands careful attention to setup. On a car like this, tire selection is not a cosmetic afterthought but a central part of how the Viper looks, sits, and responds on the road. Fitment uses radial tires, with staggered sizing that varies between front and rear positions and, on some versions, between 18-inch and 19-inch front wheel setups. That makes the real decision less about general brand shopping and more about matching the exact sub-model and axle position before comparing tire specifications.
Which Tire Size Is Right for The 2017 Dodge Viper
The 2017 Dodge Viper uses three primary tire sizes, and the correct choice depends first on identifying the exact sub-model and whether you are fitting the front or rear axle. This is also a staggered fitment with both 18-inch and 19-inch rim diameters in use, so confirming wheel diameter is essential before selecting a tire.
295/25R19 is a metric radial size with a 295-millimeter section width, a 25-series profile, and fitment for a 19-inch rim. On the 2017 Dodge Viper, this size serves as a front tire on ACR-based applications, where the lower-profile 19-inch front setup is part of the vehicle's exact fitment package. Its dimensions make it a position-specific choice rather than a general Viper front tire. Use this size only after confirming that the car is one of the front 19-inch configurations rather than an 18-inch front setup.
355/30R19 is a very wide metric radial, using a 355-millimeter section width with a 30-series profile on a 19-inch rim. On the 2017 Dodge Viper, it is the rear tire size across the covered rear applications, making it a key part of the car's staggered performance-oriented setup. The practical comparison here is less about alternate sizing and more about matching the correct rear position and wheel. Buyers should confirm that the tire is being selected for the rear axle and not confused with the narrower front fitments.
295/30R18 is a metric radial size that combines a 295-millimeter section width with a 30-series profile for an 18-inch rim. On the 2017 Dodge Viper, this size appears on the front of GTC, GTS, and SRT applications that use the 18-inch front wheel arrangement. Although it shares the same nominal width as 295/25R19, it is built around a different rim diameter and profile. That means the first check is wheel size, followed by confirmation that the car is one of the front 18-inch configurations.
Sub-model fitment on the 2017 Dodge Viper is defined by both trim and axle position, so tire selection is not the same across every version. The key distinction is the front wheel setup, with some configurations using a 19-inch front tire and others using an 18-inch front tire, while rear fitment remains consistent.
1
2017 Dodge Viper ACR Front
The 2017 Dodge Viper ACR Front uses a 295/25R19 radial tire, giving it the 19-inch front fitment rather than the 18-inch setup seen on other versions. Tire selection here starts with confirming that lower-profile front specification before comparing tires for wheel compatibility and intended road use.
The 2017 Dodge Viper ACR Rear uses the 355/30R19 radial rear size shared with the other covered rear Viper applications. The main priority is keeping the correct rear-specific size in place and avoiding any mix-up with the narrower front fitments.
The 2017 Dodge Viper GTC (ACR Pkg.) Front uses the same 295/25R19 radial front size as the ACR. That means the front tire decision follows the same 19-inch wheel confirmation process rather than the 18-inch front fitment used on standard GTC, GTS, and SRT versions.
The 2017 Dodge Viper GTC (ACR Pkg.) Rear uses a 355/30R19 radial tire. Rear tire selection is straightforward once the axle position is confirmed, but it still matters to match the exact rear size rather than choosing by overall Viper model name alone.
The 2017 Dodge Viper GTC Front uses a 295/30R18 radial tire, placing it among the 18-inch front-wheel configurations. Buyers should confirm that front wheel diameter first, since this size is not interchangeable with the 19-inch front setup used on ACR-based versions.
The 2017 Dodge Viper GTC Rear uses 355/30R19, the common rear radial size across the covered Viper variants. The practical goal is to keep the rear fitment matched to the axle position and to maintain the staggered relationship with the correct front tire.
The 2017 Dodge Viper GTS Front uses a 295/30R18 radial tire on an 18-inch front rim. Selection centers on verifying that the car retains its proper front wheel setup, then choosing a tire that matches that exact front fitment rather than the 19-inch ACR-based front size.
The 2017 Dodge Viper GTS Rear uses the 355/30R19 radial rear size. That keeps rear fitment consistent, so the main task is pairing it with the correct front size for the specific GTS configuration rather than treating all Viper wheel positions the same.
The 2017 Dodge Viper SRT Front uses a 295/30R18 radial tire. Front tire choice should begin with confirming the 18-inch rim, especially on cars that may have seen wheel changes, since the Viper also uses a different 19-inch front size in other configurations.
The 2017 Dodge Viper SRT Rear uses 355/30R19 as its rear radial fitment. The important point is maintaining the proper rear-specific size and checking that it remains correctly matched to the front tire size used on the SRT's 18-inch front setup.
The tire sizes listed on this page assume factory-standard vehicle configuration. The following modifications may affect tire fitment and are not reflected in this guide:
Suspension changes (lowering, lift kits, spring replacements)
Body alterations (fender modifications, custom bodywork)
If your vehicle has been modified from factory specifications, verify tire clearance before purchase.
Frequently Asked Questions
Common 2017 Dodge Viper tire questions usually come down to exact size by axle position, 18-inch versus 19-inch front wheel fitment, and how to choose the right radial tire once the correct sub-model setup is confirmed.
Tire Size & Fitment
What tire size fits a 2017 Dodge Viper?
The 2017 Dodge Viper uses three primary tire sizes: 295/25R19, 355/30R19, and 295/30R18. Front fitment varies by sub-model, with ACR-based front applications using 295/25R19 and GTC, GTS, and SRT front applications using 295/30R18, while rear applications use 355/30R19.
That means the first step is identifying both the exact Viper version and whether the tire is for the front or rear axle. The car uses a staggered setup, so the front and rear sizes are not interchangeable, and the front wheel diameter changes between certain configurations.
What size rim does a 2017 Dodge Viper use?
The 2017 Dodge Viper uses both 18-inch and 19-inch rim diameters, depending on the tire position and sub-model. The 295/30R18 front size fits an 18-inch rim, while both 295/25R19 and 355/30R19 fit 19-inch rims.
Wheel diameter matters just as much as tire width on this car because the Viper does not share one universal wheel setup across every version. Checking the actual wheel on the vehicle is especially important if the car has changed hands or has seen aftermarket wheel swaps since new.
Why does the 2017 Dodge Viper have more than one tire size?
The 2017 Dodge Viper has more than one tire size because it uses a staggered front-and-rear arrangement, and front fitment also changes between certain sub-models. Rear applications use 355/30R19, while front applications use either 295/25R19 or 295/30R18 depending on the configuration.
That combination means tire selection is tied to the car's exact setup rather than simply its model name. A buyer should confirm axle position first, then confirm whether the front wheel is the 18-inch or 19-inch version before comparing tire options or planning replacements.
Choosing the Right Tire
What should I consider when choosing a 2017 Dodge Viper tire?
Start with the exact size required for the car's axle position and sub-model, since the 2017 Dodge Viper uses a staggered setup and more than one front size. The key sizes are 295/25R19, 355/30R19, and 295/30R18, all in radial construction.
After confirming the correct size, compare the tire's intended wheel diameter and make sure the car still has the expected wheel package. On a Viper, even small fitment mistakes can upset front-to-rear balance, so this is a case where exact sizing matters more than broad brand comparison.
How do I choose between the available 295/25R19 and 295/30R18 front tires for a 2017 Dodge Viper?
The choice between 295/25R19 and 295/30R18 is not a matter of preference on the 2017 Dodge Viper; it depends on the sub-model and front wheel diameter. ACR-based front applications use 295/25R19, while GTC, GTS, and SRT front applications use 295/30R18.
That makes wheel confirmation the deciding factor before any other comparison begins. Even though both sizes share a 295-millimeter nominal width, they are built for different rim diameters and should be treated as separate fitments tied to specific front-end configurations.
How do I choose the right 355/30R19 rear tire for a 2017 Dodge Viper?
The 355/30R19 size is the rear fitment across the covered 2017 Dodge Viper rear applications, so the first task is simply confirming that the tire is being selected for the rear axle. This is a wide radial size designed to work as part of the car's staggered layout.
Once rear position is confirmed, the practical goal is maintaining the proper relationship between rear and front tire sizing. A buyer should make sure the chosen rear tire remains paired with the correct front size for the car's exact configuration rather than mixing front and rear fitment logic.
Restoration & Appearance
Does correct tire fitment matter for a 2017 Dodge Viper restoration or preservation-minded build?
Yes, correct tire fitment matters on a 2017 Dodge Viper even when the goal is preservation rather than routine replacement. This car's visual stance and functional setup depend heavily on its staggered sizing, including the distinction between 18-inch and 19-inch front applications.
Keeping the exact size tied to the car's sub-model helps preserve the intended look and avoids visual mismatches between front and rear proportions. On a low-production modern performance car, buyers often benefit from verifying the current wheel setup carefully before selecting replacement tires.
How does tire sizing affect the appearance of a 2017 Dodge Viper?
Tire sizing has a major effect on the appearance of a 2017 Dodge Viper because the car uses very low-profile front tires and an extremely wide rear tire. The difference between 295/25R19 and 295/30R18 at the front also changes the visual relationship between tire sidewall and wheel diameter.
That means the right size does more than maintain fitment; it preserves the Viper's intended stance and front-to-rear balance. A car with altered wheels or mismatched sizes can look noticeably off, so checking both axle position and wheel diameter is important before replacing any tire.
Fitment, Maintenance & Road Use
Can modifications affect tire fitment on a 2017 Dodge Viper?
Yes, modifications can affect tire fitment on a 2017 Dodge Viper, especially if the car has aftermarket wheels, suspension changes, or altered ride height. Because this Viper uses staggered radial sizes and more than one front wheel diameter, even a small setup change can alter clearance and compatibility.
Owners should verify the actual wheel diameter and confirm that front and rear sizes still match the car's intended configuration. Steering clearance, fender space, and suspension travel are all worth checking on a modified Viper before assuming the original size arrangement still applies.
What should I inspect before driving a 2017 Dodge Viper on new tires?
Before driving a 2017 Dodge Viper on new tires, inspect the wheels for the correct diameter, confirm the front and rear tires are in their proper positions, and look over valve stems and wheel condition. Tire pressure should also be checked carefully before the car returns to regular road use.
A quick visual inspection afterward is equally worthwhile, especially on a low-clearance, high-performance car. Watch for any sign of rubbing, uneven seating, or interference at steering lock, and recheck pressures after the first drives so the staggered setup stays consistent and predictable.
What should I check before a longer drive in a 2017 Dodge Viper?
Before a longer drive in a 2017 Dodge Viper, confirm that the car is wearing the correct front and rear tire sizes for its exact configuration and inspect each tire for cuts, bulges, cracking, or abnormal wear. Pressure and general wheel condition should be checked before the trip begins.
Longer drives put more importance on consistent condition across the whole staggered set, not just individual tires. It also helps to verify that no wheel changes or recent service work disturbed the front-to-rear size arrangement, since the Viper's fitment is highly specific by axle position.
