2017 Dodge Trucks Durango Tires

The 2017 Dodge Trucks Durango sits in the modern three-row SUV market with a distinctly muscular Dodge character, blending family-duty practicality with rear-drive-based proportions and available V8 power. That mix means tire selection matters not just for appearance, but for how the vehicle carries itself on the road. This model uses two primary radial sizes, 265/50R20 and 265/60R18, depending on sub-model and wheel package. The key decision is confirming whether your Durango rides on 18-inch or 20-inch wheels, then choosing the tire that matches your intended use and overall presentation. Owners should also verify the actual wheel setup before replacement, especially on vehicles that may have seen wheel or trim-package changes.

Which Tire Size Is Right for The 2017 Dodge Trucks Durango

The 2017 Dodge Trucks Durango uses two primary tire sizes, and the correct one depends on the exact sub-model and wheel diameter. Both are radial metric sizes, but one fits an 18-inch rim and the other fits a 20-inch rim, so identifying the actual wheel on the vehicle is the first step before comparing tire choices.

1
265/50R20Metric radial
Fit(s): Citadel V6, Citadel V8, GT, R/T, and SXT Plus
Construction: RadialRim: 20 in

A 265/50R20 tire uses a 265-millimeter nominal section width, a 50-series aspect ratio, radial construction, and a 20-inch rim. On the 2017 Dodge Trucks Durango, this size supports trims equipped with the larger wheel package and gives the buyer a modern metric fitment rather than a vintage sizing convention. The main consideration is matching the tire to a true 20-inch wheel and selecting a tire that suits how the vehicle is used. This size is especially important to verify on trims that were offered with more than one wheel and tire combination.

Explore 265/50R20 Tires
2
265/60R18Metric radial
Fit(s): GT, SXT, SXT Plus, and Special Service
Construction: RadialRim: 18 in

A 265/60R18 tire carries the same 265-millimeter nominal width, but uses a 60-series aspect ratio on an 18-inch rim with radial construction. For the 2017 Dodge Trucks Durango, this is the other primary fitment and applies to trims equipped with the smaller wheel diameter. Because the rim diameter differs from the 20-inch setup, this is not simply a style choice between sidewalls. It is a fitment decision that starts with confirming the actual wheels on the vehicle, especially if it has changed hands or received aftermarket wheel swaps.

Explore 265/60R18 Tires

2017 Dodge Trucks Durango Sub-Model Tires

Tire fitment on the 2017 Dodge Trucks Durango varies by sub-model, and several trims were offered with more than one valid size. Checking the exact trim and confirming whether the vehicle has 18-inch or 20-inch wheels will keep the tire search focused on the right fitment.

1

2017 Dodge Trucks Durango Citadel V6

The 2017 Dodge Trucks Durango Citadel V6 uses the 265/50R20 radial size. Tire selection here centers on matching the 20-inch wheel setup and choosing a replacement that suits the vehicle's road use without drifting into the 18-inch fitment used on other trims.

Associated Tire Sizes
2

2017 Dodge Trucks Durango Citadel V8

The 2017 Dodge Trucks Durango Citadel V8 also uses the 265/50R20 radial tire size. The practical takeaway is straightforward: confirm the 20-inch wheel and stay with this size when comparing replacement tires for everyday driving, touring use, or a clean stock-style presentation.

Associated Tire Sizes
3

2017 Dodge Trucks Durango GT

The 2017 Dodge Trucks Durango GT can use either 265/50R20 or 265/60R18, depending on the wheel setup on the vehicle. That makes wheel confirmation the first step before choosing tires, since the decision is tied to rim diameter rather than a simple preference between two interchangeable sizes.

Associated Tire Sizes
4

2017 Dodge Trucks Durango R/T

The 2017 Dodge Trucks Durango R/T uses the 265/50R20 radial size. Replacing tires on this trim starts with verifying the 20-inch wheels and then selecting a tire that matches the vehicle's intended use, whether that means preserving its original stance or maintaining confident road manners.

Associated Tire Sizes
5

2017 Dodge Trucks Durango SXT

The 2017 Dodge Trucks Durango SXT uses the 265/60R18 radial fitment. Buyers should focus on the 18-inch wheel setup and avoid assuming that a 20-inch tire from another Durango trim will apply without a complete wheel and fitment change.

Associated Tire Sizes
6

2017 Dodge Trucks Durango SXT Plus

The 2017 Dodge Trucks Durango SXT Plus can use either 265/50R20 or 265/60R18 depending on how the vehicle was equipped. Confirming the current wheel diameter matters most here, particularly on used vehicles where wheels may have been changed after the original sale.

Associated Tire Sizes
7

2017 Dodge Trucks Durango Special Service

The 2017 Dodge Trucks Durango Special Service uses the 265/60R18 radial tire size. Tire shopping for this trim should stay focused on the 18-inch setup and on practical replacement considerations such as proper wheel match, condition, and intended road use.

Associated Tire Sizes

Important Fitment Notes

The tire sizes listed on this page assume factory-standard vehicle configuration. The following modifications may affect tire fitment and are not reflected in this guide:

  • Wheel modifications (wider rims, offset changes, aftermarket wheels)
  • Suspension changes (lowering, lift kits, spring replacements)
  • Body alterations (fender modifications, custom bodywork)

If your vehicle has been modified from factory specifications, verify tire clearance before purchase.

Frequently Asked Questions

For a 2017 Dodge Trucks Durango, the biggest questions usually involve identifying the correct size by trim, confirming 18-inch versus 20-inch wheels, and understanding how that choice affects replacement tire selection, fitment checks, and everyday road use.

Tire Size & Fitment

What tire size fits a 2017 Dodge Trucks Durango?

The 2017 Dodge Trucks Durango uses either 265/50R20 or 265/60R18, depending on the sub-model and wheel package. Both are radial metric sizes, but they are tied to different rim diameters, so there is not one universal size across every Durango trim.

The first thing to confirm is the actual wheel diameter on the vehicle. Citadel V6, Citadel V8, and R/T use 265/50R20, while SXT and Special Service use 265/60R18, and GT plus SXT Plus can appear with either setup. On a used Durango, checking the sidewall and wheel before ordering helps avoid choosing the wrong fitment.

What size rim does a 2017 Dodge Trucks Durango use?

A 2017 Dodge Trucks Durango uses either an 18-inch or 20-inch rim, depending on trim and wheel package. The 265/60R18 tire fits an 18-inch wheel, and the 265/50R20 tire fits a 20-inch wheel.

Rim diameter is the critical fitment point because a tire built for an 18-inch wheel cannot be mounted on a 20-inch wheel, and vice versa. Before replacing tires, verify the wheel size stamped on the rim or confirm the size on the current tire sidewall. That is especially important on GT and SXT Plus models, where more than one original fitment can apply.

Do all 2017 Dodge Trucks Durango sub-models use the same tire size?

No, 2017 Dodge Trucks Durango sub-models do not all use the same tire size. Some trims use 265/50R20, some use 265/60R18, and GT plus SXT Plus can be found with either size depending on the wheel setup.

That means trim name alone is not always enough to choose tires with confidence. A Citadel or R/T owner can usually focus on the 20-inch size, while SXT and Special Service owners should look at the 18-inch fitment. On GT and SXT Plus models, the safest approach is to confirm the actual wheel and tire on the vehicle before comparing replacement options.

Choosing the Right Tire

What should I consider when choosing a 265/50R20 tire for a 2017 Dodge Trucks Durango?

Start by confirming that the vehicle truly uses the 265/50R20 size and rides on 20-inch wheels. This fitment appears on the Citadel V6, Citadel V8, R/T, and some GT and SXT Plus models, so the right choice begins with matching the tire to the exact wheel setup.

After size confirmation, compare the tire's intended use with how the Durango is driven. A daily-driven SUV, a highway-focused family vehicle, and a low-mileage second vehicle may call for different replacement priorities. It also helps to inspect the current wheels for damage and verify that no suspension or wheel changes have altered the original fitment relationship.

What should I consider when choosing a 265/60R18 tire for a 2017 Dodge Trucks Durango?

A 265/60R18 tire should be chosen only after confirming that the Durango has 18-inch wheels and that this is the correct fitment for the trim. This size applies to the SXT, Special Service, and some GT and SXT Plus vehicles.

The practical goal is preserving the intended fitment rather than treating the 18-inch and 20-inch sizes as casual substitutes. Check the current sidewall, inspect the wheel size directly, and look for any signs that the vehicle has been modified since new. That extra step is especially useful when buying tires for a Durango with an unknown ownership or service history.

How do I choose between the available tire sizes for a 2017 Dodge Trucks Durango?

You do not choose between 265/50R20 and 265/60R18 as interchangeable options for the same wheel. The correct tire size is determined by the Durango's actual rim diameter and, in many cases, by the specific sub-model equipped from the factory with that wheel package.

The better question is whether the vehicle wears 18-inch or 20-inch wheels today. Once that is confirmed, the tire search becomes much easier and more accurate. On GT and SXT Plus trims, which can use either setup, checking the vehicle itself matters more than assuming one size from the trim badge alone.

Restoration & Appearance

Does correct tire fitment matter for a 2017 Dodge Trucks Durango restoration?

Yes, correct tire fitment still matters on a 2017 Dodge Trucks Durango even though it is a modern SUV rather than a vintage restoration subject. Using the proper 265/50R20 or 265/60R18 size helps preserve the vehicle's intended stance, wheel relationship, and overall visual balance.

Appearance can shift noticeably when the wrong rim diameter or tire profile is used, especially on a vehicle with strong wheel-arch presence like the Durango. Owners aiming for a stock-style presentation should confirm trim, wheel size, and the current setup before replacement. That keeps the finished look aligned with the way the vehicle was originally equipped.

Which tire should I choose for a stock-style 2017 Dodge Trucks Durango?

A stock-style 2017 Dodge Trucks Durango should stay with the tire size that matches its original wheel setup: 265/50R20 for the 20-inch configuration or 265/60R18 for the 18-inch configuration. The goal is to preserve the vehicle's intended proportions rather than mixing fitments from different trims.

That approach is especially useful on GT and SXT Plus models, since either size may be correct depending on equipment. Matching the existing wheel diameter and maintaining the proper tire profile usually keeps the overall presentation closest to a clean factory-style look. Inspecting the vehicle first matters more than relying on a trim name alone.

Fitment, Maintenance & Road Use

Can modifications affect tire fitment on a 2017 Dodge Trucks Durango?

Yes, modifications can affect tire fitment on a 2017 Dodge Trucks Durango. Wheel swaps, changes in wheel width or offset, suspension lowering, lift changes, and body alterations can all influence how a 265/50R20 or 265/60R18 tire sits and clears under the vehicle.

A modified Durango should be checked at the wheel, not just by trim name. Clearance at the fender, suspension, and steering components matters, and an aftermarket 20-inch or 18-inch wheel may not mirror the original setup exactly. Looking at the actual wheel dimensions and current tire size before replacement helps avoid expensive fitment mistakes.

What should I inspect before driving a 2017 Dodge Trucks Durango on new tires?

Before driving a 2017 Dodge Trucks Durango on new tires, inspect the wheel condition, confirm the correct tire size, and make sure inflation is set properly for the vehicle's use. It also helps to check for visible issues such as suspension wear, alignment-related tire wear patterns, or damage around the bead seat area.

A quick walk-around after installation is worthwhile on any SUV, especially one that may have seen curb contact, prior wheel changes, or uneven wear from old tires. Recheck pressure after the first several drives and pay attention to vibration, pulling, or rubbing. Those signs can point to balance, alignment, or clearance issues that should be addressed early.

What should I check before a longer drive in a 2017 Dodge Trucks Durango?

Before a longer drive in a 2017 Dodge Trucks Durango, confirm that the tires match the vehicle's correct size, inspect tread and sidewalls, and make sure pressures are where they need to be. Look closely for cracking, cuts, punctures, bulges, or uneven wear that could become more serious under sustained highway use.

Longer trips put more heat and load into the tire than short local use, so condition matters as much as size. It is also smart to verify that the wheels are free of visible damage and that there is no rubbing at full steering lock. On a recently purchased Durango, a full fitment and condition check is time well spent.