The 2017 Aston Martin DB11 introduced a new chapter for Aston Martin grand touring, blending modern performance with the long-hood, short-deck proportions expected of the marque. It is a car built for speed, composure, and visual drama, so tire fitment matters both mechanically and aesthetically. The 2017 Aston Martin DB11 uses a staggered radial setup with 255/40R20 front tires and 295/35R20 rear tires on 20-inch rims. Available choices here focus on modern blackwall performance tires from BFGoodrich and Nitto rather than vintage-style construction. The key decision is confirming front versus rear fitment and matching the tire to the car’s current wheel setup and intended road use.
Which Tire Size Is Right for The 2017 Aston Martin DB11
The 2017 Aston Martin DB11 uses two primary tire sizes, with one size for the front axle and a wider size for the rear, both on 20-inch rims. Because this is a staggered radial fitment, the first step is confirming whether you are replacing a front or rear tire. Once that is clear, the decision becomes choosing the right tire within that position-specific size and verifying wheel-width compatibility where applicable.
255/40R20 is a metric radial size in which 255 is the nominal section width in millimeters, 40 is the aspect ratio, R indicates radial construction, and 20 is the rim diameter in inches. On the 2017 Aston Martin DB11, this size serves the front position in the car’s staggered setup and supports the precise steering response expected from a modern grand touring car. BFGoodrich offers this size in the g-Force Phenom T/A series with a blackwall sidewall. It should be chosen specifically for the front axle and checked against actual wheel width before installation.
295/35R20 is a metric radial size where 295 is the nominal section width in millimeters, 35 is the aspect ratio, R denotes radial construction, and 20 identifies the wheel diameter in inches. On the 2017 Aston Martin DB11, this is the rear tire size, giving the car the wider rear fitment typical of a high-performance staggered arrangement. Nitto offers this size in the NT555 G2 series with a blackwall sidewall. It should be evaluated as a rear-position tire and matched to the actual rear wheel setup on the car.
Fitment on the 2017 Aston Martin DB11 is straightforward in one sense and position-specific in another. The covered Base configuration uses one radial size at the front and a different radial size at the rear, so confirming axle position matters before selecting a tire.
1
2017 Aston Martin DB11 Base Front
The 2017 Aston Martin DB11 Base Front uses the narrower 255/40R20 radial size as part of the car’s staggered 20-inch setup. That makes front tire selection a matter of choosing the correct position-specific size and confirming compatibility with the front wheel width on the car.
The 2017 Aston Martin DB11 Base Rear uses the wider 295/35R20 radial size on a 20-inch rim. Rear tire selection should focus on the proper axle-specific size and on verifying that the wheel and overall setup still match the wider rear fitment.
The tire sizes listed on this page assume factory-standard vehicle configuration. The following modifications may affect tire fitment and are not reflected in this guide:
Suspension changes (lowering, lift kits, spring replacements)
Body alterations (fender modifications, custom bodywork)
If your vehicle has been modified from factory specifications, verify tire clearance before purchase.
Best 2017 Aston Martin DB11 Tires for Sale
Available 2017 Aston Martin DB11 tire choices center on modern radial blackwall performance tires in the correct front and rear sizes. The current selection includes BFGoodrich and Nitto options across two different tire series, so comparison comes down to axle position, series, and wheel-width compatibility where applicable.
Common 2017 Aston Martin DB11 tire questions usually center on the staggered front and rear sizes, 20-inch rim fitment, product selection, and what to inspect before putting a high-performance grand touring car back on the road.
Tire Size & Fitment
What tire size fits a 2017 Aston Martin DB11?
The 2017 Aston Martin DB11 uses a staggered tire setup with 255/40R20 at the front and 295/35R20 at the rear. Both are radial tires mounted on 20-inch rims, but they are not the same size front to rear, so replacement starts with identifying the axle position.
That staggered layout means a front tire should not be selected as though it were a universal fit for the whole car. Check the tire sidewall currently on the vehicle, confirm whether the wheel is front or rear, and verify that the car still carries its intended wheel and suspension setup before choosing a replacement.
What size rim does a 2017 Aston Martin DB11 use?
The 2017 Aston Martin DB11 uses 20-inch rims with both of its primary tire sizes. The front 255/40R20 and rear 295/35R20 both share the same rim diameter, even though the rear tire is substantially wider than the front.
Matching rim diameter is only the starting point on a staggered performance car. Wheel width also matters, especially when comparing replacement tires, so it is worth confirming the actual wheels on the car if it has ever been modified or if a previous owner changed the factory-style setup.
Why does the 2017 Aston Martin DB11 have more than one tire size?
The 2017 Aston Martin DB11 has more than one tire size because it uses a staggered setup, with a narrower 255/40R20 tire at the front and a wider 295/35R20 tire at the rear. This is a common layout on high-performance grand touring cars that separate front and rear tire roles.
For the owner, the practical result is simple: tire selection has to be position-specific. A correct replacement starts with knowing whether the tire is for the front or rear axle, then checking that the wheels, alignment, and any suspension changes still suit the intended staggered fitment.
Choosing the Right Tire
What should I consider when choosing a 255/40R20 or 295/35R20 tire for a 2017 Aston Martin DB11?
Start with the correct axle-specific size, since the 2017 Aston Martin DB11 uses 255/40R20 at the front and 295/35R20 at the rear. Construction is straightforward because both are radial fitments, so the main selection factors become size accuracy, wheel compatibility, tire series, and the intended road use of the car.
Product details still matter even when the basic fitment is clear. Compare the actual wheel width, review load and specification details where they are given, and make sure the tire choice suits the way the car is driven, whether that means regular touring use, occasional spirited driving, or replacing one position in a matched set.
What sidewall styles are available for 2017 Aston Martin DB11 tires?
The available 2017 Aston Martin DB11 tires in these sizes use a blackwall sidewall style. That gives the car a clean modern performance look that suits the DB11’s contemporary grand touring character without introducing vintage-style whitewall or stripe treatments.
Since sidewall variation is limited here, the real comparison shifts to axle position, tire series, and wheel compatibility. A buyer choosing front and rear replacements should focus less on cosmetic sidewall differences and more on selecting the correct 20-inch radial size for each end of the car.
What brands offer tires for the 2017 Aston Martin DB11?
Current size-specific choices for the 2017 Aston Martin DB11 include BFGoodrich and Nitto. BFGoodrich covers the 255/40R20 front size with the g-Force Phenom T/A series, while Nitto covers the 295/35R20 rear size with the NT555 G2 series.
Because these brand options are tied to different axle positions, the decision is not simply choosing a brand name in the abstract. Confirm whether you need a front or rear tire first, then compare the applicable tire’s specifications, wheel-width suitability where stated, and how it fits into the overall setup already on the car.
Restoration & Appearance
Which tire should I choose for a period-style 2017 Aston Martin DB11?
A period-style approach on a 2017 Aston Martin DB11 still means staying with its modern staggered radial sizing rather than looking for vintage construction. The right starting point is 255/40R20 for the front and 295/35R20 for the rear, preserving the car’s intended modern performance appearance and wheel proportion.
Appearance on a newer collector car like the DB11 is shaped more by maintaining the correct front-to-rear stance than by choosing whitewalls or other classic sidewall treatments. Keeping the proper axle-specific sizes, blackwall presentation, and matching overall setup usually does more for the car’s visual integrity than experimenting with alternate sizing.
Does correct tire fitment matter for a 2017 Aston Martin DB11 restoration or collector presentation?
Correct tire fitment matters on a 2017 Aston Martin DB11 because the car’s stance, wheel fill, and overall presentation depend on its staggered 20-inch setup. Using the proper 255/40R20 front and 295/35R20 rear sizes helps preserve the proportions expected of a modern Aston Martin grand tourer.
Collectors and careful owners should pay attention to more than just the numbers molded into the sidewall. Wheel design, actual wheel width, tire condition, and whether the car still retains its intended ride height all influence how authentic and well-sorted the finished presentation appears once the car is back on the road.
Fitment, Maintenance & Road Use
Can modifications affect tire fitment on a 2017 Aston Martin DB11?
Yes, modifications can affect tire fitment on a 2017 Aston Martin DB11 even when the replacement tire matches the original front or rear size. Changes to wheel width, wheel offset, suspension height, alignment settings, or body clearance can all alter how a 255/40R20 front or 295/35R20 rear tire sits on the car.
That matters most on a staggered performance setup where space and balance are more sensitive than on a single-size arrangement. Any DB11 with aftermarket wheels or suspension changes should have its actual wheel dimensions and clearance checked carefully before new tires are installed, especially at full steering lock and full suspension travel.
What should I inspect before driving a 2017 Aston Martin DB11 on new tires?
Before driving a 2017 Aston Martin DB11 on new tires, inspect the wheels for damage, confirm that front and rear tires are mounted in the correct positions, and verify inflation pressure. It is also wise to check for any visible alignment issues, suspension wear, or rubbing marks that could affect a fresh set of tires.
A high-performance grand touring car can expose setup problems quickly, so the condition around the tire matters almost as much as the tire itself. Look for uneven wear on the old tires, listen for vibration once the car is moving, and recheck pressure and fastener torque after the first driving cycle.
What should I check before a longer drive in a 2017 Aston Martin DB11?
Before a longer drive in a 2017 Aston Martin DB11, confirm that the front 255/40R20 and rear 295/35R20 tires are in sound condition with no cracking, bulges, cuts, or unexplained air loss. Tread condition, tire age, and correct inflation all deserve attention, especially on a car that may spend part of its life parked.
Longer highway use puts sustained heat and load into the tires, so small issues become more important. A quick pre-drive walkaround, a pressure check when the tires are cold, and a look for any signs of contact inside the wheel wells can help catch problems before they turn into an interruption on the road.
