The 2016 Dodge Viper represents the final stretch of one of America’s most uncompromising modern performance cars, a front-engine machine known for enormous grip, dramatic proportions, and track-focused intent. Tire selection on this car is inseparable from the way the Viper delivers its character, because fitment changes between front and rear positions and also shifts between standard models and ACR-based configurations. Front sizes include 295/30R18 or 295/25R19, while the rear uses a massive 355/30R19 radial. The real decision is confirming the exact sub-model and wheel setup first, then choosing a tire that matches the car’s intended balance of appearance, use, and clearance.
Which Tire Size Is Right for The 2016 Dodge Viper
The 2016 Dodge Viper uses three primary tire sizes, and the right one depends on both sub-model and axle position. Standard front fitment uses 295/30R18, ACR-based front fitment uses 295/25R19, and rear fitment uses 355/30R19, so the first step is confirming whether the car is an ACR, GTC with ACR Package, or another Viper configuration and verifying the wheel diameter at each end.
The 295/25R19 size is a metric radial format: 295 is the nominal section width in millimeters, 25 is the aspect ratio, R identifies radial construction, and 19 is the rim diameter in inches. On the 2016 Dodge Viper, this is a specialized front fitment tied to ACR-based setups rather than the full model range. Its very short sidewall reflects the car’s aggressive handling mission and 19-inch front wheel package. This size should be chosen only after confirming the exact front wheel configuration and making sure the car has not been changed from its intended setup.
The 355/30R19 size is a metric radial with an extremely wide 355-millimeter section width, a 30-series profile, and a 19-inch rim diameter. On the 2016 Dodge Viper, it serves as the rear tire size across the covered rear applications, making it central to the car’s planted stance and power delivery. This is not a general-purpose fitment, but a purpose-built rear size for a high-output performance car. It is the right size to evaluate when matching the Viper’s rear wheel diameter, preserving the intended front-to-rear relationship, and checking clearance on any modified car.
Fit(s): GT Front, GTC Front, GTS Front, and SRT Front
Construction: Radial|Rim: 18 in
The 295/30R18 size uses modern metric radial sizing, with a 295-millimeter nominal section width, a 30-series profile, and an 18-inch rim diameter. On the 2016 Dodge Viper, this is the front tire size for GT, GTC, GTS, and SRT configurations rather than ACR-based cars. It keeps the front setup distinct from the 19-inch ACR front arrangement, so wheel diameter matters just as much as the size code itself. This is the size to use when the car retains its standard front-wheel layout and the goal is to stay aligned with that original fitment pattern.
Sub-model fitment on the 2016 Dodge Viper is not one-size-fits-all, because front tire sizing changes between ACR-based cars and the rest of the range while the rear size remains consistent. Checking the exact model and whether the tire is for the front or rear is essential before selecting a replacement.
1
2016 Dodge Viper ACR Front
The 2016 Dodge Viper ACR Front uses the 295/25R19 radial size, which sets it apart from the standard Viper front fitment. That makes wheel-diameter confirmation especially important when replacing front tires or when checking a car that may have been altered from its original ACR-style setup.
The 2016 Dodge Viper ACR Rear uses the 355/30R19 radial size shared with the other covered rear Viper applications. Tire selection here centers on maintaining the correct rear fitment relationship and confirming that the wheel and suspension setup still match the intended Viper rear specification.
The 2016 Dodge Viper GT Front uses the 295/30R18 radial size rather than the 19-inch ACR front fitment. That means front replacements should start with the correct 18-inch wheel confirmation, then move to selecting a tire that suits the car’s use and current setup.
The 2016 Dodge Viper GT Rear uses the 355/30R19 radial size, matching the rear fitment used across the covered Viper rear applications. The main concern is keeping the rear size aligned with the front fitment already on the car and checking for any wheel or suspension changes before replacement.
The 2016 Dodge Viper GTC (ACR Pkg.) Front uses the 295/25R19 radial size, following the ACR-style front arrangement. This makes it important to confirm that the car still carries its ACR-package front wheels before choosing a tire, especially on a car with track-oriented modifications.
The 2016 Dodge Viper GTC (ACR Pkg.) Rear uses the 355/30R19 radial size. Replacement selection should focus on preserving the intended rear fitment and making sure the current wheel package still matches the ACR-package layout used on the car.
The 2016 Dodge Viper GTC Front uses the 295/30R18 radial size found on the standard front-wheel arrangement. Tire selection begins with confirming the 18-inch front wheels and then making sure the front setup has not been changed to an ACR-style configuration.
The 2016 Dodge Viper GTC Rear uses the 355/30R19 radial size. Choosing a rear replacement means staying with the correct 19-inch rear fitment and verifying clearance and wheel setup if the car has aftermarket wheels or suspension changes.
The 2016 Dodge Viper GTS Front uses the 295/30R18 radial size rather than the 19-inch ACR front size. That distinction matters because the front tire must match both the wheel diameter and the intended non-ACR front fitment pattern.
The 2016 Dodge Viper GTS Rear uses the 355/30R19 radial size shared across the covered rear Viper applications. Tire selection should keep the rear fitment matched to the front setup already on the car and account for any modifications that could affect clearance.
The 2016 Dodge Viper SRT Front uses the 295/30R18 radial size. That makes the front replacement process fairly straightforward as long as the car still has its intended 18-inch front wheels and has not been converted to a different Viper wheel package.
The 2016 Dodge Viper SRT Rear uses the 355/30R19 radial size. Rear tire selection should center on the correct 19-inch wheel fitment and on preserving the front-to-rear balance that is built into the Viper’s staggered tire setup.
The tire sizes listed on this page assume factory-standard vehicle configuration. The following modifications may affect tire fitment and are not reflected in this guide:
Suspension changes (lowering, lift kits, spring replacements)
Body alterations (fender modifications, custom bodywork)
If your vehicle has been modified from factory specifications, verify tire clearance before purchase.
Frequently Asked Questions
2016 Dodge Viper tire questions usually come down to front-versus-rear sizing, 18-inch versus 19-inch front wheels, and confirming the exact sub-model before replacing anything. The answers below focus on fitment, construction, selection, and the checks that matter before road use.
Tire Size & Fitment
What tire size fits a 2016 Dodge Viper?
The 2016 Dodge Viper uses three tire sizes across the covered applications: 295/30R18, 295/25R19, and 355/30R19. Front fitment changes by configuration, with 295/30R18 used on GT, GTC, GTS, and SRT front positions, while 295/25R19 is used on ACR and GTC with ACR Package front positions. Rear fitment uses 355/30R19.
The key is identifying both the exact Viper configuration and whether the tire is for the front or rear. This is a staggered performance setup, so matching the correct axle and wheel diameter matters just as much as the size itself. A quick check of the current wheels is especially important on cars that may have seen track use or aftermarket changes.
What size rim does a 2016 Dodge Viper use?
The 2016 Dodge Viper uses both 18-inch and 19-inch rims, depending on position and configuration. Standard front applications use an 18-inch rim with 295/30R18, ACR-based front applications use a 19-inch rim with 295/25R19, and rear applications use a 19-inch rim with 355/30R19.
That means wheel diameter should be confirmed before a replacement tire is chosen, especially at the front of the car. Two front tire sizes appear on this Viper, and they do not share the same rim diameter. On any car with changed wheels, verify the actual wheel size at each corner instead of assuming every 2016 Viper uses the same front setup.
Do all 2016 Dodge Viper sub-models use the same tire size?
No. Rear fitment stays consistent at 355/30R19 across the covered sub-model rear applications, but front fitment changes. ACR and GTC with ACR Package front positions use 295/25R19, while GT, GTC, GTS, and SRT front positions use 295/30R18.
That difference makes the exact sub-model name important, but axle position matters too. A buyer choosing only by year, make, and model could easily end up with the wrong front tire if the car is an ACR-based configuration. Confirming the wheel diameter and reading the existing front and rear sidewalls is a smart final check before replacement.
Choosing the Right Tire
What should I consider when choosing a 2016 Dodge Viper tire?
Start with the exact fitment: front and rear tires are different on the 2016 Dodge Viper, and front sizing also changes by sub-model. The correct choice begins with the proper size code and rim diameter, whether that means 295/30R18 at the front, 295/25R19 at the front on ACR-based cars, or 355/30R19 at the rear.
From there, think about how the car is used and whether its current wheel and suspension setup still matches stock dimensions. A low-profile, staggered performance car leaves little room for casual substitutions. Owners should also consider tire age, clearance at full steering lock, and whether the car has been modified for track use or appearance.
How do I choose between the available 2016 Dodge Viper tire sizes?
The available sizes are not alternatives for the same wheel position. Each one serves a specific role on the 2016 Dodge Viper: 295/30R18 is the standard front size, 295/25R19 is the ACR-based front size, and 355/30R19 is the rear size. Choosing correctly depends on the exact model and where the tire will be mounted.
That means the decision is really about matching the car’s existing front and rear wheel package, not picking whichever size seems close. Mixing up the two front sizes can create an immediate wheel-diameter conflict. Checking the wheel itself, the current tire sidewall, and the car’s trim level is the most practical way to avoid an expensive mistake.
What rim-fitment details matter when choosing 2016 Dodge Viper tires?
Rim diameter is the first rim-fitment detail that matters on a 2016 Dodge Viper because the car uses both 18-inch and 19-inch front applications, plus a 19-inch rear application. The tire size must match the wheel diameter exactly, so a 295/30R18 cannot be used on a 19-inch wheel, and a 295/25R19 cannot be used on an 18-inch wheel.
Beyond diameter, buyers should confirm the actual wheel setup already on the car, especially if it has aftermarket wheels or a changed suspension. A staggered Viper setup leaves limited tolerance for mismatch. Clearance to suspension components, fenders, and steering range should be verified any time the car differs from its original wheel and ride-height configuration.
Restoration & Appearance
Does correct tire fitment matter for a 2016 Dodge Viper restoration?
Yes. Even on a modern collector car like the 2016 Dodge Viper, correct tire fitment matters because the car’s stance, wheel presentation, and front-to-rear balance depend on the proper staggered sizing. Using the right front size for the exact configuration and the proper 355/30R19 rear size helps preserve the visual and functional character of the car.
Appearance-oriented work should still begin with accurate fitment rather than style alone. An ACR-based car and a standard-front-wheel Viper do not use the same front tire, so the wheel package must be verified first. When originality matters beyond basic size, model-specific documentation and marque knowledge are worth consulting before any visible tire change is made.
How does tire fitment affect the appearance of a restored 2016 Dodge Viper?
Tire fitment has a major effect on how a restored 2016 Dodge Viper sits and looks, because the car relies on a very pronounced staggered setup and low-profile sidewalls. The wide 355/30R19 rear tire is a big part of the Viper’s visual presence, while the front fitment differs between standard and ACR-based versions.
Using the wrong front size can change the way the wheel opening is filled and can make the car look mismatched even before any driving issues appear. A clean restoration or preservation project benefits from confirming axle position, wheel diameter, and sub-model first, then choosing tires that maintain the intended proportions of that specific Viper configuration.
Fitment, Maintenance & Road Use
Can modifications affect tire fitment on a 2016 Dodge Viper?
Yes. Modifications can affect tire fitment on a 2016 Dodge Viper because the car already uses very wide, low-profile, staggered radial sizes with limited room for error. Aftermarket wheels, altered offsets, suspension changes, ride-height adjustments, or body modifications can all change the clearance relationship around a 295/30R18, 295/25R19, or 355/30R19 setup.
A modified Viper should be measured and inspected before replacement tires are chosen, rather than assuming the original fitment still applies. Steering clearance at the front and fender or suspension clearance at the rear deserve special attention. On a car with track-oriented changes, checking actual wheel diameter at each corner is especially important before ordering tires.
What should I inspect before driving a 2016 Dodge Viper on new tires?
Before driving a 2016 Dodge Viper on new tires, inspect the wheel condition, verify that the correct size is mounted at each axle, and check inflation pressure carefully. It also helps to look over the suspension and alignment condition, because a Viper’s low-profile tires can react quickly to setup problems that might be less obvious on a less extreme car.
A short, cautious road test should follow, with attention to steering feel, vibration, rubbing, and any sign of uneven clearance. This matters even more if the car has sat for long periods or has had wheel changes. Rechecking pressure and visually inspecting the sidewalls after the first drive is a sensible habit on a collector-performance vehicle.
What should I check before a longer drive in a 2016 Dodge Viper?
Before a longer drive, a 2016 Dodge Viper should have its tire pressures checked cold, along with a visual inspection for cuts, bulges, cracking, and irregular tread wear. Confirm that the front and rear tires are the proper sizes for the car’s specific configuration, since this Viper does not use the same size at all four corners.
Longer trips also make it worthwhile to inspect for slow air loss and to verify that no tire is contacting liners, suspension parts, or bodywork under steering or load. Cars that spend time in storage can look fine at a glance while still carrying aged tires. The Viper’s performance-focused fitment makes a careful pre-drive inspection especially worthwhile.
