The 2016 BMW 428i xDrive sits in the modern grand-touring side of the 4 Series lineup, blending BMW coupe and convertible style with all-wheel-drive confidence. That makes tire fitment especially important, because this car appears with several factory-size combinations rather than one universal setup. Primary fitments include 17-, 18-, and 19-inch radial sizes, with staggered front and rear sizing on some configurations. Available choices stay firmly in modern performance-oriented blackwall radial territory, with BFGoodrich and Nitto options across several g-Force and NT555 series. The key is matching the exact wheel diameter and, where applicable, confirming whether the car uses a square or staggered arrangement.
Which Tire Size Is Right for The 2016 BMW 428i xDrive
The 2016 BMW 428i xDrive uses five primary tire sizes, and the right one depends first on wheel diameter and then on whether the car is using a square setup or a staggered front-and-rear arrangement. All fitments are radial, but 17-, 18-, and 19-inch applications are all present here, so identifying the exact sub-model position and wheel package comes before comparing brands or tire series.
Fit(s): Convertible, Convertible Front, Coupe, and Coupe Front
Construction: Radial|Rim: 19 in
In 225/40R19, the 225 identifies nominal section width in millimeters, 40 is the aspect ratio, R marks radial construction, and 19 is the wheel diameter in inches. On the 2016 BMW 428i xDrive, this size serves as a low-profile front or square-fitment radial depending on configuration. Available choices include BFGoodrich blackwall tires in the g-Force Comp 2 AS and g-Force Phenom T/A series. This size is the one to evaluate when the car is already on 19-inch wheels and the goal is to preserve the intended wheel diameter and low-profile stance.
Fit(s): Convertible, Convertible Front, Coupe, and Coupe Front
Construction: Radial|Rim: 18 in
The 225/45R18 size uses a 225-millimeter nominal section width, a 45-series profile, radial construction, and an 18-inch rim. For the 2016 BMW 428i xDrive, it appears in both square applications and as the front size in staggered 18-inch setups. Product choices include blackwall performance radials from BFGoodrich and Nitto, with g-Force Comp 2 AS, g-Force Sport Comp 2, g-Force Phenom T/A, and NT555 G2 series represented. It is the size to confirm when the car has 18-inch front wheels and you want to stay within the correct front fitment range.
A 225/50R17 tire carries a 225-millimeter nominal section width, a 50-series profile, radial construction, and fits a 17-inch wheel. On the 2016 BMW 428i xDrive, this is the 17-inch square-fitment size used on certain coupe and convertible applications. Blackwall radial options are available from BFGoodrich and Nitto, including the g-Force Comp 2 AS, g-Force Sport Comp 2, and NT555 G2 series. This size deserves attention when the car remains on 17-inch wheels and the priority is matching that wheel diameter before considering brand, load capacity, or tread character.
In 255/35R19, the 255 is the nominal section width in millimeters, 35 is the aspect ratio, R indicates radial construction, and 19 identifies the wheel diameter. For the 2016 BMW 428i xDrive, this size is used as a rear fitment in a staggered 19-inch setup rather than as a universal size across the whole car. BFGoodrich offers blackwall choices here in the g-Force Comp 2 AS, g-Force Sport Comp 2, and g-Force Phenom T/A series. This is the rear size to verify when the car uses wider 19-inch rear wheels and a front-to-rear stagger.
The 255/40R18 format denotes a 255-millimeter nominal section width, a 40-series sidewall profile, radial construction, and an 18-inch rim diameter. On the 2016 BMW 428i xDrive, this size appears as the rear tire in staggered 18-inch applications, paired with a narrower front size. Available blackwall options come from BFGoodrich in the g-Force Comp 2 AS, g-Force Sport Comp 2, and g-Force Phenom T/A lines. It should be selected only after confirming that the car uses the staggered 18-inch rear-wheel setup rather than a same-size arrangement at all four corners.
Sub-model fitment matters on the 2016 BMW 428i xDrive because coupe and convertible versions share some sizes, while front and rear staggered applications use different widths. The first step is confirming whether the car is a full square setup or a position-specific front or rear fitment on 18-inch or 19-inch wheels.
1
2016 BMW 428i xDrive Convertible
The 2016 BMW 428i xDrive Convertible uses a square-fitment path with 225-width radial sizes on 17-, 18-, or 19-inch wheels. Tire selection starts with confirming the wheel diameter already on the car, then comparing blackwall performance options within that exact size.
The 2016 BMW 428i xDrive Convertible Front uses a narrower front radial size in staggered 18-inch or 19-inch form. That makes front-position confirmation important, especially when replacing only two tires or maintaining the intended front-to-rear width relationship.
The 2016 BMW 428i xDrive Convertible Rear uses the wider rear radial size in the staggered setup, either on 18-inch or 19-inch wheels. Rear tire choice should match the actual rear wheel diameter and width before comparing available g-Force series options.
The 2016 BMW 428i xDrive Coupe follows the same square-fitment pattern as the convertible, using 225-width radial tires on 17-, 18-, or 19-inch wheels. The practical decision is not construction type, but identifying the exact wheel package and staying with the correct size for that setup.
The 2016 BMW 428i xDrive Coupe Front uses the narrower front size in a staggered 18-inch or 19-inch arrangement. Buyers replacing front tires should verify that the car is not using a square setup before choosing between the available blackwall performance radials.
The 2016 BMW 428i xDrive Coupe Rear uses a wider rear radial on staggered 18-inch or 19-inch combinations. That means rear replacement should begin with wheel-diameter confirmation and a check that the current wheel setup has not been changed from stock-style sizing.
The tire sizes listed on this page assume factory-standard vehicle configuration. The following modifications may affect tire fitment and are not reflected in this guide:
Suspension changes (lowering, lift kits, spring replacements)
Body alterations (fender modifications, custom bodywork)
If your vehicle has been modified from factory specifications, verify tire clearance before purchase.
Best 2016 BMW 428i xDrive Tires for Sale
Available 2016 BMW 428i xDrive tires center on modern blackwall radial performance choices from BFGoodrich and Nitto. Across the supported sizes, the main distinctions in the product grid are tire series, wheel-diameter fitment, rim-width compatibility, and load-capacity differences within the correct front, rear, or square application.
Tire questions for the 2016 BMW 428i xDrive usually come down to wheel diameter, square versus staggered fitment, and choosing among the available radial performance options. The FAQs below focus on exact size identification, product selection, and the checks worth making before road use.
Tire Size & Fitment
What tire size fits a 2016 BMW 428i xDrive?
The 2016 BMW 428i xDrive uses five primary tire sizes: 225/50R17, 225/45R18, 225/40R19, 255/40R18, and 255/35R19. The 225-width sizes appear on square setups and on the front of staggered applications, while the 255-width sizes are used at the rear on staggered 18-inch and 19-inch combinations.
Choosing the right one starts with identifying the wheel diameter on the car and whether all four wheels are the same size and width. On cars with position-specific front and rear fitment, replacing by size alone without checking wheel position can lead to the wrong tire being selected.
What size rim does a 2016 BMW 428i xDrive use?
The 2016 BMW 428i xDrive appears with 17-inch, 18-inch, and 19-inch rim diameters. The matching tire sizes are 225/50R17 for 17-inch wheels, 225/45R18 and 255/40R18 for 18-inch wheels, and 225/40R19 and 255/35R19 for 19-inch wheels.
Rim diameter is the first measurement to confirm before ordering tires, especially on a car that may have changed wheels over time. The tire size must match the wheel diameter exactly, and staggered setups also require confirming whether the tire is intended for the front or rear axle.
Why does the 2016 BMW 428i xDrive have more than one tire size?
More than one tire size applies because the 2016 BMW 428i xDrive was fitted with different wheel packages, including 17-, 18-, and 19-inch applications, and some versions use staggered front and rear sizing. That creates both square setups with the same size at all four corners and staggered combinations with narrower fronts and wider rears.
The practical result is that the correct tire cannot be chosen from year, make, and model alone. Checking the actual wheel package on the car, along with front-versus-rear position where applicable, is the most reliable way to stay within the intended fitment range.
Choosing the Right Tire
What should I consider when choosing a 2016 BMW 428i xDrive tire?
Start with the exact tire size already associated with the car’s wheel package, then confirm whether the setup is square or staggered. Since every primary fitment for the 2016 BMW 428i xDrive is radial, the main comparison points become wheel diameter, front or rear application, tire series, rim-width compatibility, and load-capacity details where they are stated.
A 17-inch square setup calls for a different selection path than an 18-inch or 19-inch staggered setup. It also helps to decide whether the priority is all-season-oriented character, a more sport-focused series, or simply staying consistent with the tires already on the car.
What brands offer tires for the 2016 BMW 428i xDrive?
BFGoodrich and Nitto offer tires for the 2016 BMW 428i xDrive across several of its supported sizes. BFGoodrich appears most broadly across the fitments with g-Force Comp 2 AS, g-Force Sport Comp 2, and g-Force Phenom T/A options, while Nitto is available in selected 17-inch and 18-inch front or square sizes through the NT555 G2 line.
Brand choice should still come after confirming the exact size and wheel position. A strong brand lineup does not override the need to match the proper front, rear, or square fitment, and it is useful to compare rim-width range and load figures when choosing between otherwise similar options.
What tire series are available for the 2016 BMW 428i xDrive?
The main tire series available for the 2016 BMW 428i xDrive are BFGoodrich g-Force Comp 2 AS, BFGoodrich g-Force Sport Comp 2, BFGoodrich g-Force Phenom T/A, and Nitto NT555 G2. Availability varies by size, so not every series appears in every front, rear, or square application.
Series selection is useful once the fitment is narrowed to the correct size. At that point, the buyer can compare whether a given series is offered for the wheel diameter on the car, whether it matches a front or rear staggered position, and whether its published load and rim-width range suit the existing wheels.
Restoration & Appearance
Which tire should I choose for a period-style 2016 BMW 428i xDrive?
A period-style approach on a 2016 BMW 428i xDrive usually means staying with the correct factory-era sizing theme and wheel diameter rather than seeking a vintage construction or specialty sidewall treatment. The available fitments here are all modern blackwall radials, so the appearance decision is more about preserving the car’s intended stance and front-to-rear sizing relationship.
That makes wheel-package accuracy especially important on a contemporary BMW. Keeping the correct 17-, 18-, or 19-inch size combination and confirming whether the car uses a square or staggered setup will do more for authentic presentation than switching to a different profile simply because it is easier to source.
Does correct tire fitment matter for a 2016 BMW 428i xDrive restoration?
Correct tire fitment matters because the 2016 BMW 428i xDrive uses multiple wheel diameters and, in some configurations, different front and rear tire widths. A restoration-minded replacement should preserve the car’s intended sizing scheme before comparing brands or series, since the visual balance of the car depends heavily on overall profile and wheel-to-tire proportion.
Authenticity on a newer enthusiast BMW is often more about getting the dimensions right than chasing unusual sidewall styling. When exact originality is important, compare the car’s current wheel package with build documentation or marque-specific references so the replacement tires support the way that particular car was equipped.
Fitment, Maintenance & Road Use
Can modifications affect tire fitment on a 2016 BMW 428i xDrive?
Yes. Wheel changes, suspension lowering, spacer use, or a move from square to staggered sizing can all affect tire fitment on a 2016 BMW 428i xDrive. Because this car already uses several legitimate wheel-and-tire combinations, an altered setup can make the original size chart only a starting point rather than the final answer.
The safest approach is to confirm actual wheel diameter and width on the car, then check front and rear tire position before replacing anything. Steering clearance, fender clearance, and consistent sizing across all-wheel-drive vehicles are worth reviewing whenever the current setup differs from a stock-style wheel package.
What should I inspect before driving a 2016 BMW 428i xDrive on new tires?
Before driving on new tires, inspect that each tire matches the correct wheel diameter and is mounted in the proper front or rear position if the car uses a staggered setup. It also helps to check inflation pressure, lug torque, visible bead seating, and whether there is any rubbing at full steering lock or under suspension compression.
A quick road-use check should include watching for vibration, pull, or unusual noise after installation. Since the 2016 BMW 428i xDrive can use several size combinations, even a correctly mounted tire should be reviewed against the actual wheel package so the car is not running mismatched front and rear dimensions.
How often should tires on a 2016 BMW 428i xDrive be inspected?
Tires on a 2016 BMW 428i xDrive should be inspected regularly for tread wear, cuts, punctures, cracking, bulges, and pressure loss. Cars driven less often still benefit from routine checks, because infrequent use can hide aging or underinflation until the vehicle is back on the road.
Inspection is especially important on this model when it uses staggered sizing, since front and rear tires are not interchangeable in the same way as a square setup. Keeping an eye on wear patterns can also reveal alignment or suspension issues before they shorten the life of the next set.
