The 2014 Land Rover Trucks LR2 sits in the later run of Land Rover’s compact luxury SUV, a model known for blending everyday road manners with the brand’s all-weather, all-surface character. Buyers looking at one today are often balancing practical use with the need to keep the vehicle’s stance and wheel fitment properly matched. The 2014 Land Rover Trucks LR2 uses radial tires in two sizes, 235/60R18 and 235/55R19, so the first decision is confirming which wheel diameter is on the vehicle. From there, the focus shifts to choosing the right metric radial size for appearance, ride, and proper fitment around the existing wheel setup.
Which Tire Size Is Right for The 2014 Land Rover Trucks LR2
The 2014 Land Rover Trucks LR2 uses two primary tire sizes, and the difference comes down to wheel diameter rather than separate bias-ply and radial fitments. Both 235/60R18 and 235/55R19 are radial sizes, and all covered sub-models can use either depending on the wheel package on the vehicle. Before choosing a tire, confirm whether the LR2 has 18-inch or 19-inch wheels.
235/55R19 is a metric radial size in which 235 identifies the nominal section width in millimeters, 55 is the aspect ratio, R indicates radial construction, and 19 is the wheel diameter in inches. On the 2014 Land Rover Trucks LR2, this size belongs to a modern radial fitment rather than a vintage numeric or alphanumeric system. Its overall proportions suit LR2s equipped with 19-inch wheels, so the key question is not decoding an old size format but confirming the actual wheel package before replacement. That helps keep the tire matched to the vehicle’s intended wheel diameter and clearance envelope.
235/60R18 is also a metric radial size, with 235 showing nominal width in millimeters, 60 indicating the aspect ratio, R marking radial construction, and 18 identifying the rim diameter in inches. For the 2014 Land Rover Trucks LR2, this is the companion fitment used with 18-inch wheels. Because the size is close in overall diameter to the 19-inch option, buyers sometimes focus on the tire dimensions first, but the practical decision starts with wheel diameter confirmation. Selecting this size makes sense when the LR2 is running its proper 18-inch wheel setup and the buyer wants to stay with the matching radial fitment.
Tire fitment is straightforward across the covered 2014 Land Rover Trucks LR2 sub-models because Base, HSE, and HSE Lux all use the same two radial size options. What matters most is confirming which wheel diameter is actually on the vehicle before choosing between the 18-inch and 19-inch fitments.
1
2014 Land Rover Trucks LR2 Base
The 2014 Land Rover Trucks LR2 Base uses the same two radial tire size options found across the LR2 range, with fitment tied to either 18-inch or 19-inch wheels. Tire selection comes down to matching the installed wheel diameter and then choosing the appropriate modern metric radial size.
The 2014 Land Rover Trucks LR2 HSE shares the same basic tire-fitment pattern as the other LR2 sub-models, using either of the two radial sizes depending on wheel diameter. That makes wheel confirmation more important than trim level when it is time to replace tires.
The 2014 Land Rover Trucks LR2 HSE Lux follows the same fitment approach as the rest of the lineup, with two modern radial sizes associated with either 18-inch or 19-inch wheels. Choosing tires for this sub-model starts with verifying the current wheel setup rather than assuming one size from the trim name alone.
The tire sizes listed on this page assume factory-standard vehicle configuration. The following modifications may affect tire fitment and are not reflected in this guide:
Suspension changes (lowering, lift kits, spring replacements)
Body alterations (fender modifications, custom bodywork)
If your vehicle has been modified from factory specifications, verify tire clearance before purchase.
Frequently Asked Questions
Common questions for the 2014 Land Rover Trucks LR2 usually center on choosing between the two metric radial sizes, confirming 18-inch versus 19-inch wheels, and checking how wheel changes or vehicle condition can affect fitment before road use.
Tire Size & Fitment
What tire size fits a 2014 Land Rover Trucks LR2?
The 2014 Land Rover Trucks LR2 uses two primary tire sizes: 235/60R18 and 235/55R19. Both are radial metric sizes, and both apply across the LR2 lineup depending on which wheel diameter is installed on the vehicle.
The important next step is checking the actual wheel size on the LR2 before ordering tires. An 18-inch tire cannot be mounted on a 19-inch wheel, and a 19-inch tire cannot be mounted on an 18-inch wheel, even though the two sizes are close in overall diameter.
What size rim does a 2014 Land Rover Trucks LR2 use?
A 2014 Land Rover Trucks LR2 uses either an 18-inch or 19-inch rim, depending on the tire size fitted to the vehicle. The 235/60R18 size pairs with an 18-inch wheel, while the 235/55R19 size pairs with a 19-inch wheel.
Rim diameter should be confirmed from the wheel itself or from the tire currently installed before replacement. Trim alone does not settle the question here, because Base, HSE, and HSE Lux can all be associated with both tire sizes in this model year.
Do all 2014 Land Rover Trucks LR2 sub-models use the same tire size?
Base, HSE, and HSE Lux do not narrow the 2014 Land Rover Trucks LR2 to one exclusive tire size. Each covered sub-model can use either 235/60R18 or 235/55R19, with the deciding factor being the wheel diameter on the individual vehicle.
That means sub-model identification helps less than wheel confirmation when selecting tires. A buyer should check the size molded on the current tire or verify the installed wheel diameter directly, especially if the LR2 has had replacement wheels fitted at some point in its life.
Choosing the Right Tire
What should I consider when choosing a tire for a 2014 Land Rover Trucks LR2?
Start with the correct primary size for the wheel on the vehicle: 235/60R18 for 18-inch wheels or 235/55R19 for 19-inch wheels. Because both are modern radial fitments, the decision is mostly about matching the installed wheel diameter and keeping the tire size consistent with the LR2’s existing setup.
After size is confirmed, look at how the LR2 is used. A daily-driven vehicle, a lower-mileage family SUV, and one with changed wheels or suspension can all call for a different level of fitment checking, especially around wheel width, clearance, and overall tire condition.
How do I choose between the available 2014 Land Rover Trucks LR2 tire sizes?
The choice between 235/60R18 and 235/55R19 is not a style preference alone; it is a wheel-fitment decision. The 2014 Land Rover Trucks LR2 uses one or the other based on whether the vehicle has 18-inch or 19-inch wheels.
If the LR2 still has its existing factory-style wheel diameter, replacement is usually straightforward once that diameter is confirmed. If the vehicle has been changed with aftermarket wheels, check the exact tire size already in use and verify that the replacement maintains proper mounting compatibility and running clearance.
How do I choose between the available radial tires for a 2014 Land Rover Trucks LR2?
Both primary LR2 sizes use radial construction, so the main selection issue is not bias-ply versus radial. Instead, choose the tire that matches the wheel diameter already on the vehicle and then compare options within that exact size based on how the LR2 is driven and maintained.
A vehicle used mainly for commuting may be evaluated differently than one kept for mixed seasonal use or occasional long trips. Once the size is settled, pay attention to wheel compatibility, even tread wear on the current setup, and whether any suspension or alignment issues should be addressed before fitting new tires.
Restoration & Appearance
Does correct tire fitment matter for a 2014 Land Rover Trucks LR2 restoration?
Correct tire fitment still matters on a 2014 Land Rover Trucks LR2, even though it is a modern radial application rather than a vintage bias-ply one. Using the proper 235/60R18 or 235/55R19 size helps preserve the vehicle’s intended stance, wheel relationship, and overall visual balance.
For a restoration-oriented project, start by verifying whether the LR2 is wearing 18-inch or 19-inch wheels and whether those wheels match the vehicle’s target presentation. A tire that fits the rim correctly but does not match the intended wheel package can change the finished look more than many buyers expect.
Which tire should I choose for a period-style 2014 Land Rover Trucks LR2?
A period-style approach on a 2014 Land Rover Trucks LR2 begins with the correct modern metric radial size for the wheel diameter already on the vehicle. That means choosing 235/60R18 with 18-inch wheels or 235/55R19 with 19-inch wheels rather than treating the two sizes as interchangeable styling choices.
Appearance on a later collector SUV is often shaped more by wheel-and-tire proportion than by sidewall ornament. Keeping the tire size matched to the intended wheel package helps the LR2 retain the look Land Rover owners usually expect, while still leaving room to evaluate overall condition and wheel authenticity.
Fitment, Maintenance & Road Use
Can modifications affect tire fitment on a 2014 Land Rover Trucks LR2?
Yes. Modifications can affect tire fitment on a 2014 Land Rover Trucks LR2, even when the replacement tire matches one of the correct primary sizes. Aftermarket wheels, changes in wheel width or offset, suspension alterations, and ride-height changes can all influence how a tire sits and clears the vehicle.
A modified LR2 should be checked more carefully than one on an unchanged wheel and suspension setup. Look at steering clearance, inner-fender space, and any signs that the current tires have rubbed under turning or compression before settling on a replacement size.
What should I inspect before driving a 2014 Land Rover Trucks LR2 on new tires?
Before driving a 2014 Land Rover Trucks LR2 on new tires, inspect the wheels for damage, confirm the tire size matches the installed rim diameter, and make sure the valve stems and mounting condition are sound. It also helps to look over the suspension and alignment condition so the new tires start life evenly.
A quick road-use check should include proper inflation, secure lug hardware, and enough clearance at full steering lock. Uneven wear on the old tires, vibration, or a history of pulling can point to alignment or chassis issues that deserve attention before regular driving resumes.
How often should tires on a 2014 Land Rover Trucks LR2 be inspected?
Tires on a 2014 Land Rover Trucks LR2 should be inspected regularly, not just when tread looks low. A routine visual check for uneven wear, cuts, cracking, bulges, and air loss helps catch issues early, especially on a vehicle that may alternate between daily use and longer periods of sitting.
Inspection matters even more after pothole impacts, wheel changes, or suspension service. Checking the tires at the same time as inflation pressure and general wheel condition makes it easier to spot developing fitment or wear problems before they turn into vibration, noise, or reduced road confidence.
