The 2014 Hyundai Trucks Santa Fe sits in the modern crossover era, where family comfort, road-trip practicality, and everyday drivability mattered just as much as clean styling. For owners keeping one on the road today, tire selection is less about vintage construction choices and more about confirming the exact wheel setup on the vehicle. This Santa Fe uses radial tires in either 235/55R19 or 235/60R18, depending on the wheel and trim configuration. Both sizes deliver a similar overall tire profile, but they pair with different rim diameters and need to be matched correctly. The key step is verifying whether the vehicle is on 18-inch or 19-inch wheels before comparing tire options.
Which Tire Size Is Right for The 2014 Hyundai Trucks Santa Fe
The 2014 Hyundai Trucks Santa Fe uses two primary tire sizes, and the right choice depends first on wheel diameter. Both sizes are radial metric fitments, but one is built for an 18-inch rim and the other for a 19-inch rim. Since both GLS and Limited models can use either size, checking the wheels currently on the vehicle matters more than assuming fitment by trim name alone.
235/55R19 is a metric radial size in which 235 identifies the nominal section width in millimeters, 55 is the aspect ratio, R indicates radial construction, and 19 is the rim diameter in inches. On the 2014 Hyundai Trucks Santa Fe, this size belongs on a 19-inch wheel and reflects a modern low-profile crossover fitment. Its overall dimensions stay close to the alternate 18-inch package, but the rim diameter is different, so wheel confirmation comes first. Choose this size only after verifying that the vehicle is actually equipped with 19-inch rims.
235/60R18 is a metric radial size where 235 is the nominal section width in millimeters, 60 is the aspect ratio, R marks radial construction, and 18 shows the rim diameter in inches. For the 2014 Hyundai Trucks Santa Fe, this size is used with an 18-inch wheel and has a slightly taller sidewall than the 19-inch alternative. That can affect the vehicle’s visual stance and replacement choices, even though the overall tire dimensions remain very close. This is the size to evaluate when the Santa Fe is riding on factory-style or replacement 18-inch wheels.
Fitment on the 2014 Hyundai Trucks Santa Fe is straightforward in one sense and worth checking in another. Both GLS and Limited models can use the same two radial tire sizes, so the important step is confirming whether the vehicle has 18-inch or 19-inch wheels before choosing tires.
1
2014 Hyundai Trucks Santa Fe GLS
The 2014 Hyundai Trucks Santa Fe GLS can use either of the two primary radial tire sizes offered for this model year. Tire selection starts with checking whether the GLS is fitted with 18-inch or 19-inch wheels, then choosing the matching size rather than relying on trim name alone.
The 2014 Hyundai Trucks Santa Fe Limited also uses the same two radial tire-size options found across this model range. The practical decision is to verify the actual wheel diameter on the vehicle first, especially if wheels have ever been changed, then match the tire size to that setup.
The tire sizes listed on this page assume factory-standard vehicle configuration. The following modifications may affect tire fitment and are not reflected in this guide:
Suspension changes (lowering, lift kits, spring replacements)
Body alterations (fender modifications, custom bodywork)
If your vehicle has been modified from factory specifications, verify tire clearance before purchase.
Frequently Asked Questions
Common questions for the 2014 Hyundai Trucks Santa Fe usually center on the two tire sizes, the difference between the 18-inch and 19-inch wheel packages, and what owners should inspect before putting the vehicle back into regular road use.
Tire Size & Fitment
What tire size fits a 2014 Hyundai Trucks Santa Fe?
The 2014 Hyundai Trucks Santa Fe uses either 235/55R19 or 235/60R18 tires. Both are radial metric sizes, and both are used on this exact year and model. The difference is not tire construction, but the wheel diameter each size is built to fit.
Choosing between them starts with the wheels on the vehicle, not just the trim badge. A Santa Fe on 19-inch rims needs 235/55R19, while one on 18-inch rims needs 235/60R18. Checking the tire sidewall and measuring the wheel package already installed is the safest way to confirm which primary size belongs on that vehicle.
What size rim does a 2014 Hyundai Trucks Santa Fe use?
A 2014 Hyundai Trucks Santa Fe uses either an 18-inch or 19-inch rim, depending on the tire size installed. The 235/60R18 tire is paired with an 18-inch rim, and the 235/55R19 tire is paired with a 19-inch rim. Both are radial applications.
Rim diameter is the first fitment detail to verify before buying tires for this Santa Fe. Even though the two tire sizes are close in overall dimensions, an 18-inch tire cannot be mounted on a 19-inch wheel, and a 19-inch tire cannot be mounted on an 18-inch wheel. Wheel changes by a previous owner can also affect what the vehicle needs today.
Do all 2014 Hyundai Trucks Santa Fe sub-models use the same tire size?
No single tire size covers every 2014 Hyundai Trucks Santa Fe configuration, but the GLS and Limited sub-models both use the same two possible sizes: 235/55R19 and 235/60R18. That means the trim level alone does not narrow the choice to one tire size.
The practical takeaway is to confirm the actual wheel setup on the vehicle before selecting tires. If the Santa Fe still has its original wheel package, the current tire sidewall should point to the correct size. If aftermarket wheels have been installed, the trim name becomes less useful than the wheel diameter and the existing tire markings.
Choosing the Right Tire
What should I consider when choosing a tire for a 2014 Hyundai Trucks Santa Fe?
Start with the correct primary size: 235/55R19 for a 19-inch wheel or 235/60R18 for an 18-inch wheel. Both are radial metric sizes, so the main selection issue is matching the tire to the wheel diameter already on the vehicle rather than deciding between different construction types.
After size is confirmed, compare the tire’s overall suitability for how the Santa Fe is used. Daily driving, highway travel, seasonal conditions, and ride preferences all matter. It also helps to inspect the wheel width, look for uneven wear that might point to alignment issues, and make sure any replacement tire keeps the vehicle’s clearance and load needs in mind.
How do I choose between the available 2014 Hyundai Trucks Santa Fe tire sizes?
The two available sizes are not alternatives to choose by appearance alone. A 2014 Hyundai Trucks Santa Fe with 18-inch wheels uses 235/60R18, while one with 19-inch wheels uses 235/55R19. Each size is built around a different rim diameter, even though the overall tire height is very similar.
That means the real decision is tied to the wheel package already on the vehicle. If the Santa Fe has been modified, verify the actual wheel diameter before ordering anything. Looking at the current tire sidewall, checking the wheel itself, and confirming there is no mismatch from a prior wheel swap will prevent an expensive fitment mistake.
What rim-fitment details should I compare when choosing 2014 Hyundai Trucks Santa Fe tires?
Rim diameter is the most important detail to compare on a 2014 Hyundai Trucks Santa Fe. This model uses either an 18-inch or 19-inch wheel, and the tire size must match that diameter exactly. The correct pairing is 235/60R18 with 18-inch rims and 235/55R19 with 19-inch rims.
Wheel width and overall wheel setup also deserve a quick check, especially if the vehicle has replacement wheels. A tire can have the correct diameter but still create issues if the wheel is not appropriate for the tire or if offset changes alter clearance. Taking a moment to confirm the full wheel package helps avoid rubbing, mounting problems, or an unintended stance change.
Restoration & Appearance
Does correct tire fitment matter for a 2014 Hyundai Trucks Santa Fe restoration or refurbishment?
Yes, correct tire fitment still matters on a 2014 Hyundai Trucks Santa Fe even though it is a modern radial application rather than a vintage bias-ply vehicle. Using the proper 235/55R19 or 235/60R18 size keeps the tire matched to the wheel package the vehicle is actually carrying and preserves the intended overall proportions.
For a clean refurbishment, the goal is usually consistency and proper stance rather than period-style sidewall details. A mismatched tire size can change the visual balance of the vehicle and create avoidable fitment issues. Owners trying to return a Santa Fe to a stock-style presentation should confirm wheel diameter first, then keep all four tires matched in size and type.
How does tire size affect the appearance of a 2014 Hyundai Trucks Santa Fe?
On a 2014 Hyundai Trucks Santa Fe, tire size affects appearance mostly through the relationship between sidewall height and wheel diameter. The 235/60R18 setup uses an 18-inch wheel with a slightly taller sidewall, while the 235/55R19 setup uses a 19-inch wheel with a slightly shorter sidewall profile.
That difference can subtly change how the vehicle sits visually, even though the overall tire diameters are close. Owners aiming for a stock-looking presentation should stay with the size that matches the wheel package already fitted to the Santa Fe. Mixing sizes or substituting without checking the wheel setup can make the vehicle look inconsistent from one corner to the next.
Fitment, Maintenance & Road Use
Can modifications affect tire fitment on a 2014 Hyundai Trucks Santa Fe?
Yes, modifications can affect tire fitment on a 2014 Hyundai Trucks Santa Fe. Wheel changes are the most obvious example, since this model uses either 18-inch or 19-inch rims depending on the tire size. Suspension changes, lowering, or non-stock wheel offsets can also alter the clearance available around the tire.
A Santa Fe with aftermarket wheels should be checked carefully before replacement tires are selected. Confirm the actual wheel diameter first, then look at sidewall clearance near the strut, fender, and steering components. Even when the tire size appears close to stock, changes in wheel design or ride height can create rubbing or limit safe clearance during turns and suspension movement.
What should I inspect before driving a 2014 Hyundai Trucks Santa Fe on new tires?
Before driving a 2014 Hyundai Trucks Santa Fe on new tires, inspect the wheel condition, valve stems, and the existing alignment and wear pattern. It also makes sense to confirm that the new tires match the wheel diameter correctly, since this model uses both 18-inch and 19-inch fitments depending on the setup.
A quick road-use inspection should also include tire pressure, lug torque, and clearance at full steering lock. Looking over the suspension for worn components is worthwhile if the old tires showed uneven wear. After installation, keep an eye on air pressure and recheck the tires after the first drives to catch any mounting, balance, or clearance issue early.
How often should tires on a 2014 Hyundai Trucks Santa Fe be inspected?
Tires on a 2014 Hyundai Trucks Santa Fe should be inspected regularly, not just when replacement time arrives. A visual check every month and before longer drives is a sensible routine, especially for a vehicle that may alternate between daily use and longer idle periods. Pressure, tread wear, and sidewall condition are the main things to monitor.
The inspection should also confirm that all four tires remain the correct size for the wheel package on the vehicle. Uneven wear, cuts, bulges, or gradual air loss can point to alignment, wheel, or suspension issues before they become more expensive problems. Catching those signs early helps the Santa Fe stay predictable and avoids premature tire replacement.
