The 2014 Ford Taurus belongs to the modern full-size sedan era, where comfort, all-season drivability, and trim-specific wheel packages played a bigger role in tire selection than they did on earlier generations. On this model, tire choice starts with confirming the exact sub-model and wheel diameter, because the Taurus uses four different primary radial sizes: 235/60R17, 235/55R18, 255/45R19, and 245/45R20. That means the decision is less about bias-ply versus radial and more about matching the car's existing setup, intended appearance, and available sidewall treatments. A careful size check is especially important before replacing tires on Limited, SEL, or SHO models that may share or alternate between larger wheel packages.
Which Tire Size Is Right for The 2014 Ford Taurus
The 2014 Ford Taurus uses four primary tire sizes, and they vary by sub-model and wheel diameter. Every fitment is a radial, but choosing correctly still depends on confirming whether the car is an SE, SEL, Limited, or SHO and then matching the actual rim diameter already on the vehicle. Once that is settled, the real comparison becomes tire style, brand, and product series within the proper size.
245/45R20 is a metric radial size in which 245 is the section width in millimeters, 45 is the aspect ratio, and 20 is the wheel diameter in inches. On the 2014 Ford Taurus, this size is part of the larger-wheel fitment used on certain trim levels and keeps the buyer focused on matching the existing 20-inch setup. Available choices in this size include BFGoodrich, Nitto, and Pro-Trac, with Blackwall, Redline, and RWL sidewall treatments. It is the size to evaluate when appearance, wheel package, and trim-specific fitment all point to a 20-inch Taurus application.
255/45R19 is a metric radial size that uses a 255-millimeter section width, a 45-series profile, and a 19-inch rim. For the 2014 Ford Taurus, this size appears on select sub-model configurations and should be matched to the wheel already on the car rather than chosen by model name alone. Its wider numeric size makes it visually and functionally distinct from the 17-inch, 18-inch, and 20-inch fitments used elsewhere in the Taurus range. This size deserves a careful wheel confirmation first, especially on trims that could be found with more than one original tire specification.
235/60R17 is a metric radial size, with 235 representing section width in millimeters, 60 indicating aspect ratio, and 17 identifying the rim diameter in inches. On the 2014 Ford Taurus, this size is tied to a specific trim-level fitment and reflects a straightforward modern radial setup on a 17-inch wheel. Its meaning is familiar to most late-model tire buyers, but the key point remains confirming that the car actually carries the 17-inch wheel package. This is the size to use when the Taurus is still on its correct 17-inch configuration and the goal is a proper replacement match.
235/55R18 is a metric radial size that combines a 235-millimeter section width with a 55-series profile on an 18-inch rim. Within the 2014 Ford Taurus lineup, this size belongs to an 18-inch wheel fitment and should be selected only after verifying the specific trim and actual wheel diameter on the car. Compared with the other Taurus sizes, it sits between the 17-inch and larger 19-inch or 20-inch packages in overall fitment role. It is a practical choice to evaluate when the vehicle retains its 18-inch wheel setup and needs a size-specific replacement rather than a wheel-package change.
Tire fitment for the 2014 Ford Taurus is not the same across every sub-model. Checking whether the car is an SE, SEL, Limited, or SHO matters because wheel diameter and tire size can change with the trim, and some trims use more than one primary fitment.
1
2014 Ford Taurus Limited
The 2014 Ford Taurus Limited uses either a 245/45R20 or 255/45R19 radial tire, so the wheel diameter on the car needs to be confirmed before replacement. That makes the buying decision less about the trim name itself and more about matching the existing 19-inch or 20-inch setup correctly.
The 2014 Ford Taurus SE uses a 235/60R17 radial tire, giving this sub-model the most straightforward fitment of the group. Tire selection then centers on staying with the correct 17-inch size and choosing the right replacement for the car's intended road use.
The 2014 Ford Taurus SEL uses either 235/55R18 or 255/45R19 radial tires, depending on the wheel package installed on the car. A quick confirmation of rim diameter is the most important first step before comparing replacement tires for this sub-model.
The 2014 Ford Taurus SHO uses either 245/45R20 or 255/45R19 radial tires, so the correct choice depends on the exact wheel package already fitted. Tire selection should start with the 19-inch versus 20-inch wheel check, then move to brand, series, and sidewall preferences within that size.
The tire sizes listed on this page assume factory-standard vehicle configuration. The following modifications may affect tire fitment and are not reflected in this guide:
Suspension changes (lowering, lift kits, spring replacements)
Body alterations (fender modifications, custom bodywork)
If your vehicle has been modified from factory specifications, verify tire clearance before purchase.
Best 2014 Ford Taurus Tires for Sale
Current 245/45R20 choices for the 2014 Ford Taurus include BFGoodrich, Nitto, and Pro-Trac options in several radial series. The available product mix also gives buyers a sidewall choice between Blackwall, Redline, and raised white letter styling.
These FAQs focus on the trim-specific tire sizes used on the 2014 Ford Taurus, plus wheel-diameter checks, product selection, appearance choices in 245/45R20, and the practical inspections that matter before regular road use.
Tire Size & Fitment
What tire size fits a 2014 Ford Taurus?
The 2014 Ford Taurus uses four primary tire sizes: 235/60R17, 235/55R18, 255/45R19, and 245/45R20. All of them are radial sizes, but they do not apply across the entire Taurus range in the same way. SE uses 235/60R17, while SEL, Limited, and SHO can use larger wheel packages depending on configuration.
The most important step is confirming the exact sub-model and the wheel diameter currently on the car before choosing a replacement tire. A Taurus with 17-inch wheels needs a different size than one with 18-inch, 19-inch, or 20-inch wheels, and trim names alone do not replace a direct wheel check.
What size rim does a 2014 Ford Taurus use?
A 2014 Ford Taurus can use 17-inch, 18-inch, 19-inch, or 20-inch rims, depending on the sub-model and wheel package. Those rim diameters correspond to the four primary tire sizes used on this vehicle: 235/60R17, 235/55R18, 255/45R19, and 245/45R20.
Rim diameter should be verified before anything else because it determines which tire size family even belongs on the car. Looking at the existing tire sidewall or measuring the wheel is often faster and more reliable than assuming fitment by appearance, especially on Limited, SEL, and SHO models with more than one possible size.
Why does the 2014 Ford Taurus have more than one tire size?
The 2014 Ford Taurus has more than one tire size because different sub-models and wheel packages use different rim diameters. The SE uses 235/60R17, while SEL, Limited, and SHO may use 18-inch, 19-inch, or 20-inch combinations such as 235/55R18, 255/45R19, and 245/45R20.
That means the right replacement tire is tied to the car's actual setup rather than the Taurus name alone. Buyers should confirm the sub-model, read the current tire sidewall, and verify the installed wheel diameter before comparing products, since moving between these sizes is not something to assume without checking the full wheel and vehicle configuration.
Choosing the Right Tire
What should I consider when choosing a 245/45R20 tire for a 2014 Ford Taurus?
A 245/45R20 tire for a 2014 Ford Taurus should first match the vehicle's existing 20-inch wheel setup. Within that size, available choices include radial options from BFGoodrich, Nitto, and Pro-Trac, with differences in tire series, sidewall styling, rim-width specifications, and listed product characteristics.
The practical choice comes down to how the car is used and how the owner wants it to look. Some buyers will want a straightforward Blackwall presentation, while others may prefer Redline or raised white letter styling. Comparing wheel-width compatibility and any listed load details is also worthwhile before settling on a specific 245/45R20 tire.
What sidewall styles are available for 2014 Ford Taurus tires?
For the 2014 Ford Taurus products available in 245/45R20, the sidewall styles include Blackwall, Redline, and RWL. Blackwall appears across several BFGoodrich and Nitto offerings, while Pro-Trac Street Pro III adds the more appearance-driven Redline and raised white letter options.
Sidewall style does not change the need to stay with the correct tire size, but it can noticeably alter the car's visual character. Buyers should start with the proper 20-inch fitment and then decide whether the goal is a subtle modern look or a more expressive period-inspired presentation through sidewall treatment.
What brands offer tires for the 2014 Ford Taurus?
For the 2014 Ford Taurus in 245/45R20, available brands include BFGoodrich, Nitto, and Pro-Trac. Those options span several radial tire series, including g-Force Sport Comp 2, g-Force Comp 2 AS, g-Force Phenom T/A, Nitto NT555 G2, and Pro-Trac Street Pro III.
Brand choice should be treated as one part of a larger fitment decision, not the starting point by itself. It still makes sense to compare the exact tire size, the sidewall style offered in that brand, and any rim-width or load details tied to the product so the tire suits both the wheel and the owner’s intended use.
Restoration & Appearance
Which tire should I choose for a period-style 2014 Ford Taurus?
A period-style 2014 Ford Taurus tire choice starts with keeping the correct modern radial size for the car's actual wheel package. On a 20-inch Taurus application, that could mean choosing a 245/45R20 product that preserves the proper overall look of the larger-wheel setup while still matching the vehicle's fitment requirements.
Appearance then becomes a matter of sidewall treatment and overall presentation rather than vintage construction. A Blackwall keeps the look restrained and contemporary, while Redline or raised white letter options add more visual presence. The right choice depends on whether the car is being kept closer to stock appearance or given a more personalized style.
How does tire construction affect the appearance of a restored 2014 Ford Taurus?
On a 2014 Ford Taurus, tire construction is less about bias-ply versus radial appearance and more about selecting the correct modern radial fitment for the vehicle's trim and wheel package. Since the Taurus uses radial sizes throughout, the visual difference usually comes from sidewall style, tread presentation, and wheel diameter rather than construction changes.
That makes size accuracy especially important on a clean, well-kept Taurus, because the wrong profile can disturb the car's stance and overall balance. Owners focused on appearance should confirm the proper 17-inch, 18-inch, 19-inch, or 20-inch setup first, then choose the sidewall style that best matches the car's intended presentation.
Fitment, Maintenance & Road Use
Can modifications affect tire fitment on a 2014 Ford Taurus?
Yes, modifications can affect tire fitment on a 2014 Ford Taurus even when the tire size looks close to stock. Changes such as aftermarket wheels, altered wheel offset, suspension lowering, or body modifications can influence clearance at the fender, strut, or steering components and may change which tire size works properly on the car.
A Taurus that no longer has its original wheel setup should be checked carefully before replacement tires are chosen. Confirming actual rim diameter and width is the first step, followed by a look at sidewall clearance during turning and full suspension movement so the selected tire suits the modified configuration rather than the stock trim label alone.
What should I inspect before driving a 2014 Ford Taurus on new tires?
Before driving a 2014 Ford Taurus on new tires, inspect the wheel condition, confirm that all four tires match the intended size, and make sure inflation is set properly for the vehicle's use. It also makes sense to check for suspension wear, uneven brake behavior, and any signs that the previous tires were rubbing or wearing irregularly.
A short visual check after installation can prevent bigger issues later. Look for adequate clearance around the inner fender and steering components, then recheck pressure after the first few drives. Any vibration, pull, or unusual contact mark deserves attention early, especially on trims that use larger 19-inch or 20-inch wheel packages.
What should I check before a longer drive in a 2014 Ford Taurus?
Before a longer drive in a 2014 Ford Taurus, verify that the tires are the correct size for the car's wheel package and inspect them for air loss, cuts, bulges, or irregular wear. A quick look at tread condition and inflation pressure is important on any Taurus, whether it uses 17-inch, 18-inch, 19-inch, or 20-inch tires.
Longer trips also make it worthwhile to check wheel hardware, confirm there is no rubbing at full steering lock, and make sure the suspension feels settled and stable. On a car with recent tire replacement or wheel changes, a cautious shakedown drive first is a smart way to catch fitment or balance issues before highway use.
