The 2013 Jeep Trucks Compass sits in the compact SUV class, blending everyday utility with Jeep styling in a package many owners use for commuting, light travel, and year-round road service. That makes tire selection less about vintage-style construction and more about matching the exact wheel and trim setup already on the vehicle. A 2013 Jeep Trucks Compass uses radial tires, but fitment spans three sizes: 215/60R17, 215/65R17, and 215/55R18. The real choice starts with confirming sub-model and wheel diameter, then comparing tires that preserve the right proportions and road manners. That approach matters even more if the Compass has replacement wheels or suspension changes.
Which Tire Size Is Right for The 2013 Jeep Trucks Compass
Three tire sizes apply to the 2013 Jeep Trucks Compass, and the right one depends on sub-model and wheel diameter. Two sizes use a 17-inch rim, while one uses an 18-inch rim, so the first step is confirming the exact wheel on the vehicle. Once that is settled, the decision becomes choosing the proper metric radial size for the Compass's specific setup rather than treating all three sizes as interchangeable.
215/60R17 is a metric radial size in which 215 refers to the nominal section width in millimeters, 60 is the aspect ratio, R identifies radial construction, and 17 is the rim diameter in inches. On the 2013 Jeep Trucks Compass, this size belongs to certain 17-inch-wheel configurations rather than every version of the model. Its profile places it in the middle of the Compass fitment range, so it should be chosen only when the vehicle's wheel diameter and trim setup match. That makes wheel confirmation especially important before replacing a mixed or previously modified set.
215/65R17 is a metric radial size with a 215-millimeter nominal section width, a 65-series profile, and fitment for a 17-inch rim. This size appears across multiple 2013 Jeep Trucks Compass sub-models, making it one of the more widely used 17-inch Compass fitments. Compared with other Compass sizes, the practical point is not just the shared rim diameter but the taller sidewall relationship built into the size itself. It should be evaluated against the actual wheel on the vehicle and kept separate from 18-inch fitments when planning a replacement.
215/55R18 is a metric radial size that keeps the same 215-millimeter nominal section width as the other Compass options but uses a 55-series profile on an 18-inch rim. On the 2013 Jeep Trucks Compass, it is tied to specific sub-model configurations that use 18-inch wheels. Its main significance is wheel-specific fitment, since an 18-inch tire cannot be selected as a substitute for a 17-inch setup without a corresponding wheel change. Buyers considering replacement tires in this size should confirm the vehicle still carries its intended 18-inch wheel package.
Sub-model fitment on the 2013 Jeep Trucks Compass is not completely uniform, because different trims can use different tire sizes and even different rim diameters. Checking the exact sub-model helps narrow the correct size, but the wheel actually on the vehicle still needs to be confirmed before choosing a replacement tire.
1
2013 Jeep Trucks Compass Latitude
The 2013 Jeep Trucks Compass Latitude uses 17-inch radial tire fitments, with both 215/60R17 and 215/65R17 associated with this sub-model. Tire selection starts with confirming which 17-inch size is already on the vehicle, then matching that size rather than assuming every Latitude uses the same profile.
The 2013 Jeep Trucks Compass Limited is the sub-model where wheel confirmation matters most, because it can use either a 17-inch or 18-inch radial setup. That means the first decision is verifying the actual rim diameter on the vehicle before selecting between its associated tire sizes.
The 2013 Jeep Trucks Compass Sport uses 17-inch radial tire fitments and can be associated with either 215/60R17 or 215/65R17. Choosing the right replacement comes down to matching the exact size already fitted to the Sport's wheels and checking that no wheel or suspension changes have altered the setup.
The tire sizes listed on this page assume factory-standard vehicle configuration. The following modifications may affect tire fitment and are not reflected in this guide:
Suspension changes (lowering, lift kits, spring replacements)
Body alterations (fender modifications, custom bodywork)
If your vehicle has been modified from factory specifications, verify tire clearance before purchase.
Frequently Asked Questions
Owners of a 2013 Jeep Trucks Compass usually need clarity on the exact tire size, the difference between 17-inch and 18-inch fitments, and what to inspect before replacing tires on a vehicle that may have seen wheel or suspension changes.
Tire Size & Fitment
What tire size fits a 2013 Jeep Trucks Compass?
A 2013 Jeep Trucks Compass uses one of three radial tire sizes: 215/60R17, 215/65R17, or 215/55R18. The correct size depends on the sub-model and, just as importantly, the wheel diameter actually on the vehicle. Latitude and Sport can use 215/60R17 or 215/65R17, while Limited can use 215/65R17 or 215/55R18.
The practical step is to confirm the exact size on the tire sidewall and verify whether the Compass has 17-inch or 18-inch wheels. That matters because two sizes share a 17-inch rim, while 215/55R18 requires an 18-inch wheel. On a used Compass, replacement wheels or previous tire changes can affect what belongs on the vehicle now.
What size rim does a 2013 Jeep Trucks Compass use?
The 2013 Jeep Trucks Compass uses either a 17-inch or 18-inch rim, depending on the tire size and sub-model configuration. The 215/60R17 and 215/65R17 sizes use 17-inch rims, while 215/55R18 uses an 18-inch rim. All three are radial fitments, but they are not all tied to the same wheel diameter.
Wheel diameter should be checked before anything else because it immediately narrows the correct replacement tire. A 17-inch Compass setup still requires matching the exact 215/60R17 or 215/65R17 size already used, and an 18-inch setup requires staying with an 18-inch tire unless the wheel package itself changes. Looking only at tread width is not enough.
Do all 2013 Jeep Trucks Compass sub-models use the same tire size?
No, 2013 Jeep Trucks Compass sub-models do not all use the same tire size. Latitude and Sport are associated with 215/60R17 and 215/65R17, while Limited is associated with 215/65R17 and 215/55R18. That means some overlap exists, but fitment is not identical across every Compass trim.
Sub-model name helps narrow the options, but the actual wheel on the vehicle is the final check. A Limited can move between 17-inch and 18-inch fitment depending on setup, so the tire sidewall and wheel diameter both need to be verified before replacement. That extra step helps avoid choosing a correct Compass size for the wrong Compass configuration.
Choosing the Right Tire
What should I consider when choosing a 215/65R17 tire for a 2013 Jeep Trucks Compass?
Start by confirming that 215/65R17 is the exact size already used on the 2013 Jeep Trucks Compass, since this model also appears with 215/60R17 and 215/55R18. 215/65R17 is a metric radial for a 17-inch rim, so the first requirement is matching the wheel diameter and the actual size fitted to the vehicle.
Once the size is confirmed, compare the tire's intended use against how the Compass is driven, including daily road use, seasonal conditions, and typical load. It also helps to inspect whether the vehicle still has its original wheel setup. On a compact SUV, even small size differences can affect clearance, stance, and replacement planning when only two tires are being changed.
How do I choose between the available tire sizes for a 2013 Jeep Trucks Compass?
The right way to choose between 215/60R17, 215/65R17, and 215/55R18 is not by preference alone but by matching the Compass's exact setup. Each size belongs to a specific combination of sub-model and wheel diameter. Two sizes use 17-inch rims, while one uses an 18-inch rim, so wheel confirmation comes first.
After that, check the full sidewall marking on the current tires and make sure the replacement set keeps the same size across the axle unless the vehicle is already set up otherwise. This matters most on used vehicles, where one trim may have received another trim's wheels. Choosing correctly starts with the vehicle as it sits today, not just the badge.
What rim-fitment details should I compare when choosing 2013 Jeep Trucks Compass tires?
The key rim-fitment detail is diameter, because the 2013 Jeep Trucks Compass uses both 17-inch and 18-inch tire fitments. A 215/60R17 or 215/65R17 tire belongs on a 17-inch rim, while a 215/55R18 tire belongs on an 18-inch rim. Matching the tire size to the wheel diameter is the first step in any safe replacement decision.
Beyond diameter, it is wise to confirm that the wheels on the vehicle have not been changed from the original setup. Aftermarket wheels can alter width and clearance even when the diameter stays the same. Checking the existing tire size, wheel markings, and visible space around the fender and suspension helps prevent choosing a size that suits the model line but not the specific Compass.
Restoration & Appearance
Does correct tire fitment matter for a 2013 Jeep Trucks Compass restoration?
Yes, correct tire fitment still matters on a 2013 Jeep Trucks Compass, even though this is a modern radial-fitment vehicle rather than a vintage restoration project. Keeping the proper size helps preserve the intended wheel-to-tire relationship, overall stance, and everyday road character. For this Compass, that means staying with the correct 215/60R17, 215/65R17, or 215/55R18 setup.
Appearance and fitment often overlap on newer collector-interest vehicles, especially if the goal is to return the SUV to a clean, stock-style presentation. Matching the right size to the correct wheel diameter prevents an obviously mismatched look. Owners pursuing a highly exact restoration should also compare the vehicle against original sales literature, photos, or marque-specific reference material.
Which tire should I choose for a stock-style 2013 Jeep Trucks Compass?
A stock-style 2013 Jeep Trucks Compass should use the exact radial tire size that matches its sub-model and wheel package: 215/60R17, 215/65R17, or 215/55R18. The most authentic-looking approach is to keep the same size and rim diameter already intended for that configuration rather than mixing sizes or switching wheel diameters without reason.
That approach keeps the Compass visually balanced and avoids the mismatched look that can come from low-profile substitutions or oversized replacements. On a used vehicle, verify that the current wheels actually belong to the setup you want to preserve. A stock-style result usually starts with correct sizing first, then moves to tread pattern and overall presentation.
Fitment, Maintenance & Road Use
Can modifications affect tire fitment on a 2013 Jeep Trucks Compass?
Yes, modifications can affect tire fitment on a 2013 Jeep Trucks Compass. Wheel changes, suspension alterations, lowering, spacers, or body modifications can change how a tire clears the fenders, suspension, and steering components. That matters here because the Compass already uses more than one factory-size range, including both 17-inch and 18-inch wheel fitments.
A Compass with aftermarket wheels may still carry a familiar tire size on paper while creating different real-world clearance conditions. Before replacing tires, compare the current wheel diameter and existing size, then inspect for rubbing marks or unusually tight space at full steering lock. That helps separate a standard Compass fitment question from one created by later vehicle changes.
What should I inspect before driving a 2013 Jeep Trucks Compass on new tires?
Before driving a 2013 Jeep Trucks Compass on new tires, inspect tire pressure, verify that all tires match the intended size, and make sure the wheel diameter matches the size installed. It is also wise to look over the wheels, valve stems, and visible suspension and steering components. On this Compass, confirming 17-inch versus 18-inch fitment is especially important.
A short initial drive should be followed by another quick check for air loss, rubbing, vibration, or uneven seating. Any sign of contact at the fender liner or during full-lock turns deserves attention right away. That is particularly helpful on vehicles that may have had wheels replaced in the past, because a new tire can expose an old fitment problem.
How often should tires on a 2013 Jeep Trucks Compass be inspected?
Tires on a 2013 Jeep Trucks Compass should be inspected regularly, with a quick visual check before routine driving and a closer inspection at service intervals or before longer trips. Look for uneven tread wear, cracking, cuts, bulges, and signs of slow air loss. Since the Compass can use several sizes, confirming that all tires still match the intended setup is also worthwhile.
Regular inspection matters even more when the vehicle sees mixed seasonal use, rough roads, or infrequent driving. Tire condition can change long before tread looks completely worn. Keeping pressure consistent and catching alignment or wear issues early helps preserve ride quality and prevents confusion later about whether a problem comes from the tire itself or an incorrect size or wheel setup.
