The 2013 Ford Taurus sits in the modern full-size sedan era, blending everyday comfort with a broad range of trim levels that could lean toward value, upscale cruising, or SHO performance. That matters for tire selection, because this Taurus does not use one universal fitment across the lineup. Depending on sub-model, it can use 235/60R17, 235/55R18, 255/45R19, or 245/45R20 radial tires. The available 245/45R20 choices also bring meaningful variation in brand, tire series, and sidewall style, including blackwall, redline, and raised white letter treatments. The right choice starts with confirming the exact trim and wheel diameter already on the car.
Which Tire Size Is Right for The 2013 Ford Taurus
The 2013 Ford Taurus uses four primary tire sizes, and the correct one depends on the exact sub-model and wheel setup. These are all radial fitments, but they span 17-inch, 18-inch, 19-inch, and 20-inch rims, so the first step is confirming both your trim level and actual wheel diameter before comparing tire options.
245/45R20 is a metric radial size in which 245 is the nominal section width in millimeters, 45 is the aspect ratio, R identifies radial construction, and 20 is the rim diameter in inches. On the 2013 Ford Taurus, this size is part of the larger-wheel fitment used on certain trims, including the SHO. Available choices include BFGoodrich, Nitto, and Pro-Trac, with blackwall, redline, and RWL sidewall treatments across several tire series. This size is the one to evaluate when your Taurus already carries a 20-inch wheel and you want to balance appearance with modern radial selection.
255/45R19 is a metric radial size that uses a 255-millimeter nominal section width, a 45-series profile, radial construction, and a 19-inch rim. Within the 2013 Ford Taurus range, this size applies to specific sub-model configurations rather than the entire lineup. Its slightly wider section format makes wheel confirmation especially important, since the car must already be set up for a 19-inch tire. This is the size to focus on when matching an existing 19-inch Taurus wheel package and preserving the vehicle's intended fitment range.
235/60R17 is a metric radial size with a 235-millimeter nominal section width, a 60-series profile, and a 17-inch rim diameter. For the 2013 Ford Taurus, this size serves a specific sub-model application and represents the smaller wheel fitment among the available factory-style combinations covered here. The taller sidewall profile is part of what distinguishes it from the 18-, 19-, and 20-inch setups used elsewhere in the Taurus line. This is the right starting point when your car remains on its original 17-inch wheel diameter and you want to stay with the proper size format.
235/55R18 is a metric radial size where 235 denotes nominal section width in millimeters, 55 is the aspect ratio, R stands for radial construction, and 18 indicates rim diameter. On the 2013 Ford Taurus, this size belongs to a particular trim-level fitment rather than all versions of the car. It sits between the 17-inch and larger 19- and 20-inch combinations, so wheel diameter remains the key checkpoint before choosing a tire. This size makes sense when the Taurus is still using its 18-inch wheel setup and the goal is to maintain proper fitment without changing wheel class.
Tire fitment varies across the 2013 Ford Taurus range, and some sub-models can be found with more than one primary size. Checking the exact trim matters here because the correct tire depends on the wheel diameter fitted to that particular car.
1
2013 Ford Taurus Limited
The 2013 Ford Taurus Limited uses either a 245/45R20 or 255/45R19 radial tire, depending on the wheel package on the car. That makes wheel-diameter confirmation the first step before narrowing down brand, series, or sidewall style.
The 2013 Ford Taurus SE uses a 235/60R17 radial tire. Selection is more straightforward on this trim, with the main priority being to stay with the correct 17-inch size and verify the car has not been changed to a different wheel setup.
The 2013 Ford Taurus SEL uses either 235/55R18 or 255/45R19 radial tires. Because both sizes are tied to different wheel diameters, the practical next step is to confirm which wheels are on the car before comparing tire choices.
The 2013 Ford Taurus SHO uses a 245/45R20 radial tire. Once that 20-inch fitment is confirmed, the decision shifts to comparing available tire series and sidewall treatments that suit the car's appearance and intended road use.
The tire sizes listed on this page assume factory-standard vehicle configuration. The following modifications may affect tire fitment and are not reflected in this guide:
Suspension changes (lowering, lift kits, spring replacements)
Body alterations (fender modifications, custom bodywork)
If your vehicle has been modified from factory specifications, verify tire clearance before purchase.
Best 2013 Ford Taurus Tires for Sale
Available 245/45R20 tires for the 2013 Ford Taurus include BFGoodrich, Nitto, and Pro-Trac options. The product grid gives you a useful way to compare tire series, blackwall versus redline or RWL sidewalls, and rim-width compatibility within this 20-inch radial size.
Tire questions for a 2013 Ford Taurus usually come down to the correct size by trim, the wheel diameter already on the car, and how to compare available 20-inch tire options once fitment is confirmed.
Tire Size & Fitment
What tire size fits a 2013 Ford Taurus?
The 2013 Ford Taurus uses four primary tire sizes: 235/60R17, 235/55R18, 255/45R19, and 245/45R20. All of them are radial sizes, but they do not apply across the entire Taurus lineup, because fitment changes by sub-model and wheel package.
The most important step is matching the tire to the actual trim and wheel diameter on the car. A Taurus SE uses a different size than a SHO, and Limited or SEL models can appear with more than one wheel package, so checking the existing sidewall and wheel before choosing a replacement prevents a mismatch.
What size rim does a 2013 Ford Taurus use?
A 2013 Ford Taurus can use 17-inch, 18-inch, 19-inch, or 20-inch rims, depending on sub-model and configuration. Those rim diameters pair with the primary tire sizes 235/60R17, 235/55R18, 255/45R19, and 245/45R20.
Rim diameter should be confirmed before anything else, because none of these sizes cross over to a different wheel diameter. Once the wheel size is verified, the next checks are whether the current setup is stock or modified and whether the replacement tire matches the wheel's width and the car's clearance requirements.
Why does the 2013 Ford Taurus have more than one tire size?
The 2013 Ford Taurus has more than one tire size because the lineup includes several sub-models and wheel packages. SE uses 235/60R17, SHO uses 245/45R20, and Limited and SEL can use either of two different sizes depending on how the car was equipped.
That means the right tire is determined by the exact vehicle in front of you, not by year and model name alone. Looking at the trim badge helps, but wheel diameter and the size molded into the current tire sidewall are the practical checkpoints when ordering replacement tires for a Taurus with multiple fitment possibilities.
Choosing the Right Tire
What should I consider when choosing a 245/45R20 tire for a 2013 Ford Taurus?
Start with the basics: 245/45R20 is a 20-inch radial size, so it belongs only on a Taurus that already uses that wheel diameter. Within that size, available choices differ by brand, tire series, sidewall style, rim-width specification, weight, and in some cases stated load capacity.
Once size is confirmed, the real decision becomes how you want the car to look and be used. A blackwall tire gives a more understated presentation, while redline or RWL changes the visual character, and checking wheel width against the tire's approved range helps avoid choosing a product that does not suit the actual wheel.
What sidewall styles are available for 2013 Ford Taurus tires?
For the 245/45R20 fitment used on certain 2013 Ford Taurus models, available sidewall styles include blackwall, redline, and RWL. Those options appear within the same basic tire size, so the choice is less about fitment format and more about how the tire presents on the car.
Sidewall style can noticeably change the personality of a Taurus, especially on a larger 20-inch wheel. Blackwall keeps the appearance modern and understated, while redline or raised white letters add a more customized look, so the better choice depends on whether the goal is a subtle finish or a more expressive visual treatment.
What brands offer tires for the 2013 Ford Taurus?
In the 245/45R20 size used on certain 2013 Ford Taurus configurations, available brands include BFGoodrich, Nitto, and Pro-Trac. Those options cover several tire series, including g-Force Sport Comp 2, g-Force Comp 2 AS, g-Force Phenom T/A, Nitto NT555 G2, and Pro-Trac Street Pro III.
Brand choice matters mainly because it often overlaps with differences in series character, sidewall treatment, and wheel-width compatibility. Instead of choosing by name alone, compare the exact size, sidewall style, intended appearance, and any published load or rim-width details so the tire suits both the Taurus and the way it will be driven.
Fitment, Maintenance & Road Use
Can modifications affect tire fitment on a 2013 Ford Taurus?
Yes. Modifications can affect tire fitment on a 2013 Ford Taurus even when the tire size matches one of the original wheel packages. Aftermarket wheels, suspension changes, lowering, spacers, or brake upgrades can all change the space available around the tire and alter what works safely on the car.
A Taurus with non-stock wheels should be checked for actual wheel diameter, width, and offset before replacement tires are chosen. Steering clearance, inner-fender space, and suspension travel also matter, so a size that belongs to another Taurus trim should not be assumed to work on a modified car without verifying the full setup.
What should I inspect before driving a 2013 Ford Taurus on new tires?
Before driving a 2013 Ford Taurus on new tires, inspect wheel condition, valve stems, lug hardware, and the basic health of the suspension and steering. The new tires should match the wheel diameter exactly, seat properly on the rim, and be set to an appropriate pressure for the car's operating requirements.
A short initial road check is useful after installation to confirm there is no rubbing, vibration, or unusual pull. It also helps to recheck air pressure and lug torque after the first miles, especially if the Taurus has larger 19-inch or 20-inch wheel packages where wheel and tire condition are more noticeable in everyday driving.
How often should tires on a 2013 Ford Taurus be inspected?
Tires on a 2013 Ford Taurus should be inspected regularly, not just when tread looks low. Check them for uneven wear, cuts, bulges, cracking, punctures, and pressure loss, and make those inspections more often if the car sees highway use, sits for long periods, or runs on larger-diameter wheel packages.
Regular inspection matters because the Taurus uses several different fitments, and replacement is easier when wear is caught early and matched correctly to the existing setup. Looking over the inside and outside shoulders, confirming pressure stays stable, and watching for signs of alignment or suspension issues can help protect both tire life and drivability.
