The 2013 Buick Trucks Enclave sits in the three-row crossover era when ride comfort, quiet highway manners, and upscale family use were central to the vehicle’s appeal. Its rounded bodywork and large-wheel stance mean tire choice affects both appearance and day-to-day drivability more than many buyers expect. This Enclave uses radial tire fitments in three sizes: 255/65R18, 255/60R19, and 255/55R20. Because those sizes keep a very similar overall diameter while changing rim diameter, the real decision is confirming which wheel package is on the vehicle. Once that is settled, selection becomes a matter of choosing the right size for the wheel, intended road use, and overall presentation.
Which Tire Size Is Right for The 2013 Buick Trucks Enclave
The 2013 Buick Trucks Enclave uses three primary tire sizes, and the right one depends on the wheel package installed on the vehicle. All three are radial metric sizes, but they fit different rim diameters: 18, 19, or 20 inches. Before choosing a tire, confirm the exact wheel diameter on the Enclave, since the sizes are close in overall height but are not meant for the same rim.
255/55R20 is a metric radial size in which 255 is the nominal section width in millimeters, 55 is the aspect ratio, R identifies radial construction, and 20 is the rim diameter in inches. On the 2013 Buick Trucks Enclave, this size belongs to the 20-inch wheel setup and gives the vehicle its largest factory-style rim package among the covered fitments. Because it is a modern radial format, buyers are usually balancing wheel confirmation, replacement quality, and intended road use rather than vintage-style construction choices. Use this size only after verifying that the Enclave is actually equipped with 20-inch wheels.
255/60R19 follows the same metric radial format: 255 millimeters of nominal section width, a 60-series profile, radial construction, and a 19-inch rim diameter. For the 2013 Buick Trucks Enclave, this size serves the 19-inch wheel configuration and stays close in overall diameter to the other Enclave fitments. That makes wheel diameter, not visual tire height, the first thing to confirm before replacing tires. This is the right size to evaluate when the vehicle wears 19-inch wheels and the goal is to maintain the proper fitment relationship between tire and rim.
255/65R18 is a metric radial size with a 255-millimeter nominal section width, a 65-series aspect ratio, and an 18-inch rim diameter. On the 2013 Buick Trucks Enclave, it corresponds to the 18-inch wheel package while preserving nearly the same overall tire diameter seen in the larger-wheel Enclave fitments. That means it should be chosen for wheel compatibility first, not simply because its dimensions look similar to the 19-inch or 20-inch alternatives. Buyers considering this size should confirm the Enclave’s actual wheels and then compare tires within the proper 18-inch fitment.
Fitment is straightforward here because the covered 2013 Buick Trucks Enclave Base can use all three primary tire sizes, depending on which wheel diameter is on the vehicle. The important step is not trim identification so much as confirming whether the Enclave has 18-inch, 19-inch, or 20-inch wheels.
1
2013 Buick Trucks Enclave Base
The 2013 Buick Trucks Enclave Base uses radial tire fitments in 255/65R18, 255/60R19, or 255/55R20, with each size tied to a different wheel diameter. Tire selection starts with verifying the actual wheel on the vehicle, then choosing the correct replacement size for that setup rather than mixing rim sizes.
The tire sizes listed on this page assume factory-standard vehicle configuration. The following modifications may affect tire fitment and are not reflected in this guide:
Suspension changes (lowering, lift kits, spring replacements)
Body alterations (fender modifications, custom bodywork)
If your vehicle has been modified from factory specifications, verify tire clearance before purchase.
Frequently Asked Questions
Common questions for the 2013 Buick Trucks Enclave usually center on which of the three metric radial sizes belongs on the vehicle, how wheel diameter affects fitment, and what to inspect before replacing tires or returning the Enclave to regular road use.
Tire Size & Fitment
What tire size fits a 2013 Buick Trucks Enclave?
The 2013 Buick Trucks Enclave uses one of three radial tire sizes: 255/65R18, 255/60R19, or 255/55R20. Each size corresponds to a different wheel diameter, so all three belong to this Enclave, but they do not mount on the same rim.
The practical step is to confirm the actual wheel package on the vehicle before buying tires. A quick look at the sidewall of the current tire or a direct wheel measurement will tell you whether the Enclave has 18-inch, 19-inch, or 20-inch rims, which is the key to choosing the correct size.
What size rim does a 2013 Buick Trucks Enclave use?
The 2013 Buick Trucks Enclave uses 18-inch, 19-inch, or 20-inch rims, depending on the tire size installed. The matching tire sizes are 255/65R18 for 18-inch rims, 255/60R19 for 19-inch rims, and 255/55R20 for 20-inch rims.
Rim diameter matters more here than small visual differences in tire profile because these Enclave fitments stay very close in overall tire height. The safest approach is to verify the wheel itself and then select the tire size that matches that rim, rather than assuming one Enclave size can substitute for another.
Why does the 2013 Buick Trucks Enclave have more than one tire size?
The 2013 Buick Trucks Enclave has more than one tire size because it was fitted with different wheel diameters. The three primary sizes—255/65R18, 255/60R19, and 255/55R20—keep a similar overall diameter while matching 18-inch, 19-inch, and 20-inch rims.
That setup lets the vehicle maintain a consistent fitment relationship while changing wheel size and tire profile. For replacement purposes, the important point is that the Enclave does not use those three sizes interchangeably on the same wheel, so the existing rim diameter needs to be confirmed before any tire is selected.
Choosing the Right Tire
What should I consider when choosing a tire for a 2013 Buick Trucks Enclave?
Start with the correct size for the wheel package on the vehicle: 255/65R18, 255/60R19, or 255/55R20. Since all three are radial metric fitments with very similar overall diameter, the main choice is not construction style but matching the tire to the Enclave’s actual rim size and intended use.
After size confirmation, compare factors such as load suitability, tread design, road-use priorities, and how the vehicle is driven. A daily-use Enclave, a lightly used family hauler, and a crossover that sees longer highway trips can all benefit from selecting a tire that matches its real use rather than choosing by appearance alone.
How do I choose between the available 2013 Buick Trucks Enclave tire sizes?
The correct way to choose between 255/65R18, 255/60R19, and 255/55R20 is by wheel diameter, not preference alone. Each size is built for a specific rim, so the Enclave’s existing 18-inch, 19-inch, or 20-inch wheel determines which tire size belongs on the vehicle.
Once the rim size is confirmed, the comparison becomes much simpler because you are only evaluating tires within the correct fitment. That helps avoid mounting mistakes and keeps the search focused on the right category of replacement tire, whether the priority is normal street use, ride quality, or maintaining the intended wheel-and-tire relationship.
How do I choose between the available 255/55R20, 255/60R19, and 255/65R18 tires for a 2013 Buick Trucks Enclave?
Those sizes should not be compared as interchangeable choices for the same wheel. A 2013 Buick Trucks Enclave on 20-inch rims needs 255/55R20, one on 19-inch rims needs 255/60R19, and one on 18-inch rims needs 255/65R18.
The better comparison is among tire options inside the single size that matches the vehicle’s wheel package. That keeps the fitment correct and lets you focus on more useful details such as driving needs, replacement timing, seasonal use, and whether the Enclave has remained stock or has had wheel changes that deserve a closer fitment check.
Restoration & Appearance
Does correct tire fitment matter for a 2013 Buick Trucks Enclave restoration?
Correct tire fitment still matters on a 2013 Buick Trucks Enclave, even though it is a newer vehicle than most restoration subjects. The proper size preserves the intended relationship between the tire and the wheel, and this Enclave’s three fitments are tied directly to 18-inch, 19-inch, or 20-inch rims.
A restoration-oriented Enclave also benefits from matching the replacement tire to the wheel package the vehicle actually carries rather than approximating by height alone. Buyers aiming for a stock-style presentation should verify the current wheel setup first, especially if the vehicle has changed hands or may have received aftermarket wheel swaps in the past.
How does tire size affect the appearance of a 2013 Buick Trucks Enclave?
Tire size affects the Enclave’s appearance because each fitment changes the visual balance between sidewall height and wheel diameter. The 255/65R18, 255/60R19, and 255/55R20 sizes stay close in overall height, but the look shifts as the wheel grows and the sidewall becomes shorter.
That means the visual decision is really part of the wheel-package decision rather than a reason to mount a mismatched tire on the wrong rim. If keeping a stock-style presentation matters, verify the wheel diameter already on the vehicle and choose the correct matching size so the Enclave retains the intended stance and proportions.
Fitment, Maintenance & Road Use
Can modifications affect tire fitment on a 2013 Buick Trucks Enclave?
Yes, modifications can affect tire fitment on a 2013 Buick Trucks Enclave. Wheel changes, altered offsets, suspension modifications, lowering, or body changes can all influence whether the original 255/65R18, 255/60R19, or 255/55R20 fitment still makes sense on the vehicle.
An Enclave that remains stock is usually straightforward because the tire size follows the factory wheel diameter. Once aftermarket wheels or suspension changes enter the picture, check wheel size, clearance at full steering lock, and the relationship between the tire and fender openings before replacing anything, especially if the previous owner changed the setup.
What should I inspect before driving a 2013 Buick Trucks Enclave on new tires?
Before driving a 2013 Buick Trucks Enclave on new tires, inspect the wheel size, tire pressure, valve stems, and general condition of the wheels. It is also smart to look over the suspension and steering components so the new tires are not being installed on a vehicle with underlying wear issues.
A road-use check should also include watching for uneven old-tire wear, verifying that the chosen size matches the rim, and making sure there is no rubbing at normal ride height or during turning. Those steps help the new tires wear properly and give the Enclave the stable, composed behavior expected from a correctly fitted radial setup.
How often should tires on a 2013 Buick Trucks Enclave be inspected?
Tires on a 2013 Buick Trucks Enclave should be inspected regularly, not just when tread appears low. Pressure loss, sidewall damage, irregular wear, cuts, bulges, and age-related deterioration can all develop gradually, especially on a vehicle that spends periods parked between longer trips.
A practical routine is to check them before longer drives and to give them a closer visual inspection at regular intervals during normal use. Because the Enclave can wear 18-inch, 19-inch, or 20-inch wheel packages, the inspection should always include confirming that the tire size still matches the wheel if the vehicle has had any past modifications.
